Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Getting BSOD on my new build can anyone help?


10 Apr 2013   #21

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Do you test each 1 on each slot ?

My System SpecsSystem Spec
.

11 Apr 2013   #22

windows 7 home premium 64 bit
 
 

Well I tested the 2 slots that I was using.

Test 1 slot one stick one / slot two stick two. I got an error

Test 2 slot one stick one pass.

Test 3 slot one stick two pass.

Test 3 slot two stick one pass.

Test 4 slot two stick two pass.

Test 5 slot one stick two / slot two stick one I got an error.

Pretty much they pass individually in both slots but error together.
My System SpecsSystem Spec
11 Apr 2013   #23

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Test each slot blue and black . You have a total of 4 slots 2 black 2 blue .

Test 1 ram stick on one slot first . If it passes on that slot then move to the next slot . If it fails then something is wrong with that slot cause it passed on the other slot .

With your board you should be on the two blue slots . For dual channel .

Note   Note
You want the test to run more then 2 passes . The memory could fail towards the end of the test
My System SpecsSystem Spec
.


11 Apr 2013   #24

windows 7 home premium 64 bit
 
 

Ok ill test the others when I get home from work

But can anything be concluded from the results from Previous test?
My System SpecsSystem Spec
11 Apr 2013   #25

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

They shouldn't be getting any errors together it could either mean either the slot is bad or the memory card is bad that is why you test each ram on every ram slot individually
My System SpecsSystem Spec
11 Apr 2013   #26

windows 7 home premium 64 bit
 
 

Ok ill test again and post back tonight
My System SpecsSystem Spec
12 Apr 2013   #27

windows 7 home premium 64 bit
 
 

Alright. so the test are concluded.

each stick of ram passes in each slot individually. tested each slot from last night at 6:00pm till no 8:00pm. with 3-7 passes each before testing another slot.

they only error when both installed into two primary ram slots.

So I decided today to look up the ram I bought. I went to the gskill website to look at my ram and I find out that its not compatible with my mobo chipset. my mother board chipset is amd 970. and its only compatible with

AMD 790 Series
AMD 785 Series
AMD 770 Series

also looked into my mobo manual to see quality vendor list of memory.

It only suggest

DDR3 2133
DDR3 2000
DDR3 1866
DDR3 1800
DDR3 1600
DDR3 1333

at various brands.

My G.Skill F3-8500CL7D-8GBRL (4Gx2) is DDR3 1066

they work for a while, but cause my system to crash.

Im not 100% sure on this. but hopefully its solves my issues. this was my first build and I had my friend look over the components. I guess we just didn't really pay much attention to the ram. we only made sure it had low latency time.

ill message back tomorrow with the results from new ram on my mobos QVL. Crosses fingers.

thanks for all your help vistaking.
My System SpecsSystem Spec
12 Apr 2013   #28

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Jerel

You're welcome . Let us know if the new memory sticks fix your issue
My System SpecsSystem Spec
15 Apr 2013   #29

windows 7 home premium 64 bit
 
 

She's a beast.

The new memory sticks did fix the issue. I went with the corsair xms3 2000mhz. installed them on Saturday.

passed memtest86
didn't crash during 3 hours of game testing
didn't crash during 2 hours of heavy web browsing/gaming

not one crash since I've installed the new sticks.

I decided to do a fresh windows install and I will be ready to OC tomorrow. Thanks again for your help
My System SpecsSystem Spec
15 Apr 2013   #30

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

You're welcome Jerel. Glad you have fixed your issue . If you're going to over click your CPU you might want to do a stress test with Prime95 and use CPU-Z.
My System SpecsSystem Spec
Reply

 Getting BSOD on my new build can anyone help?




Thread Tools



Similar help and support threads for2: Getting BSOD on my new build can anyone help?
Thread Forum
bsod on new pc build please help BSOD Help and Support
BSOD - New build BSOD Help and Support
BSOD On A New PC Build BSOD Help and Support
New build BSOD BSOD Help and Support
New Build PC BSOD BSOD Help and Support
BSOD on New Build BSOD Help and Support
My first build -- BSOD -- Please help BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:24 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33