Many BSOD's and very bad MemTest Results


  1. Brunan
    Posts : 17
    Windows 7 Home Premium 64bit
       New #1

    Many BSOD's and very bad MemTest Results


    Hi all, I'm after experiencing an onslaught of BSOD's today, each with a different error code.
    Also, After doing a MemTest, on the first Pass, It counted up a total of 200'000+ errors
    I restarted the Memtest after getting over 200'000 errors (it tending to go on and on and on . . .), and on the first pass it read up no errors.
    I am heavily confused and worried, can anyone give me some help on the matter?
    Attached is the Windows 7 Diagnostic folder.
    Thanks!
      My Computer
    Quote Quote

  3. x BlueRobot
    Posts : 7,235
       New #2

    You clearly must have RAM or motherboard problems, follow these steps:

    Run Memtest86+ for least 7-8 passes, and preferably overnight as it can take a while to fully complete.

    Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

    Test each RAM stick and every motherboard DIMM slot available.

    Arc said:
    No code has to be inserted here. It is a RAM, a bad RAM.

    But if you have got a result like that:
    No code has to be inserted here. It is a motherboard issue. The particular slot is bad.
      My Computer
    Quote Quote

 

  Related Discussions
Interpreting Memtest Results
in Hardware & Devices

Hi guys, hope someone will be able to help me, I've recently been experiencing occasional BSODs, used to get them rarely, which prompted me to run Memtest and it came back with a failed test. Does Memtest ONLY test RAM? I was a bit confused by the CPU0 next to each fail but think maybe's that's...
I just built a new machine and it looks working fine but a memtest(Memtest86 v.4.20) returned errors whose screen shot is as follows. What exactly does this mean beyond that the errors were detected? 1. Is the Test #7 being done when this shot was taken? 2. The error happened while the test #6...
Right where to start... I have built a custom PC, needless to say its not my first so I knew what I was doing. I installed Windows 7 64 Ultimate to it and had it up and running fine, it ran for hours then blue screened on me, I thought it might have been a one off so tried again and it kept...
Hi, after getting the BSOD many times, reinstalling windows and trying to debug i still have no idea how to fix my brand new system:cry: I just bought a dell xps 9100 with 12gbs of ram and im assuming that its faulty because memtest returned 18000+ errors in around 10 minutes of checking.. ...
Hi all, need help. I have posted a BSOD issue and and in order to detect possible memory problem, i have execute Memtest-86 v4.0 (bootable) but after 8 minutes working, my PC has begin to ...BEEP! BEEP! BEEP! :( I have stooped process and redo it to take some pictures. While the process, in...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 14:12.
Find Us