Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Constant random BSOD errors, Multiple error messages on screen

14 Apr 2013   #21
louism957

Windows 7 Ultimate x64
 
 

These are the last 3 dumps, the last one is without video card drivers


My System SpecsSystem Spec
.
14 Apr 2013   #22
x BlueRobot

 

Code:
BugCheck 50, {fffffa9004d72c18, 0, fffff80002ce3b74, 5}

Could not read faulting driver name
Probably caused by : ntkrnlmp.exe ( nt!PoIdle+194 )
Code:
Usual causes:  Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus,  Device driver, NTFS corruption, BIOS
It seems that an invalid memory address was referenced, and the virtual address was unable to converted into a physical address.

The WHQL graphics driver should be okay, since it has been tested by Microsoft for stability:

Quote:
WHQL
Release Date: January 17th 2013
Version: 13.1
In Device Manager: 9.012
Run Memtest86+ for least 7-8 passes, and preferably overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

Quote   Quote: Originally Posted by Arc View Post
testSlot1Slot2
RAM1ErrorError
RAM2GoodGood
It is a RAM, a bad RAM.

But if you have got a result like that:
testSlot1Slot2
RAM1ErrorGood
RAM2ErrorGood
It is a motherboard issue. The particular slot is bad.
My System SpecsSystem Spec
14 Apr 2013   #23
louism957

Windows 7 Ultimate x64
 
 

I've run memtest before on both sticks of ram, one turned out to have lots of errors so I've sent it off to crucial for a replacement the other stick has been fine. And as for the drivers, those are the ones I've installed, so I'm not sure what's going on
My System SpecsSystem Spec
.

14 Apr 2013   #24
x BlueRobot

 

The graphics driver you had installed on the crashes uploaded was the 2012 driver, and have you tried your hard-drive manufacturer's tests to check for any remaining errors?

Update your System Specifications with Speccy, and then copy this information into your System Specifications: Go to your UserCP, and then select Edit System Spec in the left pane. Copy the information from Speccy into the required fields. These System Specifications will then follow your every post.
My System SpecsSystem Spec
14 Apr 2013   #25
louism957

Windows 7 Ultimate x64
 
 

Okay, I've updated my system specs, tell me if anything is missing. I'll also try those 13.1 drivers again.
My System SpecsSystem Spec
15 Apr 2013   #26
x BlueRobot

 

Quote:
Antivirus none
You may want to install the programs suggested again: MSE, Malwarebytes (free version) and SuperAntiSpyware (free version).

Could you enter your BIOS, and then post the voltages of 3.3V, 5V and 12V readings. What is the wattage of your PSU?
My System SpecsSystem Spec
15 Apr 2013   #27
louism957

Windows 7 Ultimate x64
 
 

Right, I'll install one of those free AV programs in a bit. My power supply is 500w I believe. On the side of it, it says Arctic Cooling AX-500F, so I'm assuming that the 500 stands for 500w. Anyway, as for readings, I checked in the bios, I could only find readings for 12v and 5v, the 12v was around 11.905 to 11.980~ and 5v was at 5.060
My System SpecsSystem Spec
15 Apr 2013   #28
x BlueRobot

 

The voltages look fine, I'll do a search for the documentation for your PSU to double check.
My System SpecsSystem Spec
15 Apr 2013   #29
louism957

Windows 7 Ultimate x64
 
 

I ran another test of TDSS Killer with all of the options in the scan parameters option enabled and it found these:
TDSSKiller screenshot
Are they anything bad?
My System SpecsSystem Spec
16 Apr 2013   #30
x BlueRobot

 

Yes, I would remove these files, they're rootkits.

I would also:
Scan for any missing, modified or corrupted protected Windows files with:
My System SpecsSystem Spec
Reply

 Constant random BSOD errors, Multiple error messages on screen




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Constant Crashes/BSOD with different error messages.
Hello, I've been trying to figure out what is wrong with my pc but Im throwing in the towel.:confused: I've ran memtest and no errors were found. Check disk was also ran and I think nothing was found. This has been happening for about a month or two now. I get constant freezes/crashes and also...
BSOD Help and Support
Random BSODs, multiple error messages, no clear cause
Hello, I have been running Windows 7 professional 64-bit for about 2 years now without any problems. In the past couple of weeks, I have had about a dozen BSODs with no common apparent cause. I've run a handful of basic diagnostics without anything conclusive coming up. Details are below,...
BSOD Help and Support
Constant BSOD, multiple errors.
Getting constant BSOD's. Just finished running Memtest86. Ran for 14 hours, 12 tests, with no issues found with my memory. I have also ran the windows memory test with no issues found. Windows 7 Home Premium x64 OEM Approximately 2 years old. I noticed on the System Health Report that it...
BSOD Help and Support
BSOD multiple error messages / random
Good to see Im not the only one struggling with this. Have attached report files. Any help would be much appreciated. Operating system Windows 7 home premium 64 bit OEM (says 64bit in control panel/computer/properties although i have a programfiles (x86) file.. Thinking thats for 32bit programs...
BSOD Help and Support
BSOD random blue screen different errors, one was multiple irp
dump is included, not sure which issue to start with. it seems to have happened since windows did an update. also I get windows explorer crashed and restarts alot too
BSOD Help and Support
Constant BSOD's, Random Stop Errors.
I've been getting near constant BSOD's on Windows 7 Ultimate x64 edition for a long time now for no apparent reason. They started about 2 months ago when I reinstalled windows, something I have since done twice more. Untill today BSOD crash dumps weren't generating and were just getting stuck at...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:10.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App