Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD on fresh installed Desktop: (ntoskrnl.exe)

12 Apr 2013   #1
jroot

Windows 7 Ultimate x64
 
 
Random BSOD on fresh installed Desktop: (ntoskrnl.exe)

I have been having random BSOD since I have re-installed my Desktop (3 Weeks ago). Before that, my system has been running "perfectly" since 2 years.

- Only changes have been a second SSD and also a new HDD.
- I used the same drivers for the Motherboard again (from CD) - perhaps i should update them some time? Other Drivers should be up to date. It still may be a driver-problem, though.

I performed a full-scan with MSE and in addition downloaded Malwarebytes and did another full-scan - found nothing. SFC /scannown found nothing either. Memtest86+ ran clean, too.


I'd be very grateful, if someone could take a look at this for me.
Minidumps and other files from SF_Diagnostic_Tool should be attachet. For further questions I shall be avaliable!

Thanks in advance.


My System SpecsSystem Spec
.
12 Apr 2013   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hello jroot.

All your recent BSODs are BugCheck 4E: PFN_LIST_CORRUPT. The crash dumps are somehow silent about the probable causes, but some Ntfs, fltmgr and fileinfo errors are there. In such a situation, first you try to update your SSD's firmware.
Uninstall Marvel SCSI drivers. Those are poorly coded and hence problematic.
Code:
Start Menu\Programs\Marvell\91xx driver
When done. follow this guide to clean up the leftover:
You are overclocked.
Code:
CPUID:        "Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz"
MaxSpeed:     3400
CurrentSpeed: 3502
As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings. Also set the BIOS to default, too.
How To Clear CMOS (Reset BIOS)

Moreover, the BIOS is old.
Code:
BiosVersion = 0706
BiosReleaseDate = 08/05/2011
As you are using SSDs, you need to use an updated BIOS. Get the BIOS Version 3603(Only for Win7 & Win8, dated 2012/11/27 from ASUS - P8Z68-V PRO (motherboard: ASUS P8Z68-V PRO).

Let us know the results.
__________________________________________________________________________
BSOD ANALYSIS:
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 4E, {99, 133b30, 0, 134d30}

Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )

Followup: MachineOwner
---------

4: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

PFN_LIST_CORRUPT (4e)
Typically caused by drivers passing bad memory descriptor lists (ie: calling
MmUnlockPages twice with the same list, etc).  If a kernel debugger is
available get the stack trace.
Arguments:
Arg1: 0000000000000099, A PTE or PFN is corrupt
Arg2: 0000000000133b30, page frame number
Arg3: 0000000000000000, current page state
Arg4: 0000000000134d30, 0

Debugging Details:
------------------


BUGCHECK_STR:  0x4E_99

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

PROCESS_NAME:  wmplayer.exe

CURRENT_IRQL:  2

LAST_CONTROL_TRANSFER:  from fffff80002f58a0c to fffff80002ec9c00

STACK_TEXT:  
fffff880`0a6a6258 fffff800`02f58a0c : 00000000`0000004e 00000000`00000099 00000000`00133b30 00000000`00000000 : nt!KeBugCheckEx
fffff880`0a6a6260 fffff800`02e761ef : 00000000`00000000 fffffa80`0518f0d0 0000000f`ffffffff fffff8a0`02375790 : nt!MiBadShareCount+0x4c
fffff880`0a6a62a0 fffff800`02ebe9a1 : cf200000`00000000 fffff680`00036a38 00000000`00000200 000fffff`00000001 : nt! ?? ::FNODOBFM::`string'+0x3273a
fffff880`0a6a6320 fffff800`02eb6162 : fffffa80`117eabc0 00000000`00000000 fffffa80`0d1d8b30 fffffa80`0d1d8ec8 : nt!MiDecommitPages+0x1a1
fffff880`0a6a6bb0 fffff800`02ec8e93 : ffffffff`ffffffff 00000000`000b90d0 00000000`000b90c8 fffffa80`00004000 : nt!NtFreeVirtualMemory+0x382
fffff880`0a6a6cb0 00000000`775a14fa : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`000b9098 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x775a14fa


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nt!MiBadShareCount+4c
fffff800`02f58a0c cc              int     3

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt!MiBadShareCount+4c

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

DEBUG_FLR_IMAGE_TIMESTAMP:  5147d9c6

IMAGE_NAME:  memory_corruption

FAILURE_BUCKET_ID:  X64_0x4E_99_nt!MiBadShareCount+4c

BUCKET_ID:  X64_0x4E_99_nt!MiBadShareCount+4c

Followup: MachineOwner
---------
My System SpecsSystem Spec
12 Apr 2013   #3
jroot

Windows 7 Ultimate x64
 
 

Hi Arc

Thank you very much for looking into this for me!
I'll follow your well described instructions ASAP.

I was aware of the old BIOS version, but my lazy opinion was not to change a running / working system.
Better use the BSOD as excuse to get things right!


As for the overclocking - I was not aware, my CPU has been overclocked. Could that just have been my CPU running in "turbo-mode"? Intel core i7 2600K - max Thurbo Frequency


Nevertheless, thanks again for the good tipps! I'll keep you posted.

Kind regards,
jroot
My System SpecsSystem Spec
.

12 Apr 2013   #4
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

As a test, you may disable turbo made. For a crashing system, it is better to use the hardware at default clock settings.

I suggested the BIOS update, as it is needed to run the SSDs properly. A properly running SSD needs the combination or recent firmware, BIOS and storage controller. But if you are reluctant (I can understand your point) you may keep it on pending
My System SpecsSystem Spec
24 Apr 2013   #5
jroot

Windows 7 Ultimate x64
 
 
Problem seems to have been resolved

After following your instructions Arc, I have now been running my system for 1 Week now, without any BSODs appearing.
Seems you have solved the problem.

Thanks again for your awesome help!
My System SpecsSystem Spec
24 Apr 2013   #6
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

You are welcome mate
For any further issue, let us know
My System SpecsSystem Spec
Reply

 Random BSOD on fresh installed Desktop: (ntoskrnl.exe)




Thread Tools




Similar help and support threads
Thread Forum
BSOD ntoskrnl.exe fresh windows 7 install
Hey guys, I have been having a problem with blue screens on this computer for a few weeks now. I finally got frustrated with it yesterday and reinstalled windows 7. The issues would happen any time I ran windows update. To fix it, I would have to restore to the oldest possible point, run the...
BSOD Help and Support
BSOD after fresh install, ntoskrnl.exe
I really need help here guys, im out of ideas. About a week ago my computer started getting BSOD randomly while gaming or browsing the web. I thought it was a failing HDD so I re installed windows onto a new one after running stress tests on it to make sure it was good. I have run stress tests...
BSOD Help and Support
BSOD on fresh installed system.
Hello there fellow debuggers. I just got a BSOD on a fresh installed Windows 7 professional x64 system. Therefore my GPU drivers and Soundcard drivers are up to date! :) It happened when I was on YouTube and I opened a new video to play, at the time the video was supposed to Play/Load I got...
BSOD Help and Support
BSOD - NTOSKRNL.EXE (KMODE_EXCEPION_NOT_HANDLED) on Fresh OS Install
I got BSOD while I was watching a movie on Netflix and playing World of Warcraft. I was setting up my settings for Media Monkey and got this blue screen of death. I recently did a fresh install on my computer no more than a week ago. I am running Windows 7 Enterprise 64 Bit with Service Pack 1. I...
BSOD Help and Support
Random BSOD - Fresh install, fresh system
Hi. I have installed a whole new windows 7 pro x64. My new mobo an ASus p5e3 pro along with new ram pc12800 gskill 2x2 ddr3 (running in 1066mhz due to my q6600) Everythingi s running perfectly...except some random BSOD. 4 total this week. I have posted a pack of dump file in here, the last 4...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:39.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App