Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Random BSOD after installing windows 7 ultimate x64 and drivers...

17 Apr 2013   #1

Windows 7 Ultimate x64
Random BSOD after installing windows 7 ultimate x64 and drivers...


I installed multiple windows 7 ultimate X64 but the BSOD is still remaining ... After I install a windows 7 ultimate x64 and the drivers BSOD randomly retunrs ... after 10 min, after 25, but continuosly ...

I attached the diagnostic tools report...
Thans for helping in advance

PS. I checked with multiple tools memmory, and drive, and others, but is oke.
my new laptop details: Lenovo B590 (20206)
Intel Pentium B980 2.4 Ghz

My System SpecsSystem Spec
17 Apr 2013   #2
x BlueRobot


Use these Blue Screen of Death (BSOD) Posting Instructions again, your dump file and some other files seem to either blank or corrupted.
My System SpecsSystem Spec
17 Apr 2013   #3

Windows 7 Ultimate x64

Ok, now again the attachment

its ok now?
My System SpecsSystem Spec

17 Apr 2013   #4
x BlueRobot


BugCheck 3B, {c0000005, fffff80002cb84e8, fffff88002bcf100, 0}

Probably caused by : memory_corruption
Usual causes:  System service, Device driver, graphics driver, memory
1: kd> !error c0000005
Error code: (NTSTATUS) 0xc0000005 (3221225477) - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
The memory address is either corrupted or invalid, or a poorly written driver is referencing invalid memory addresses.


Start Menu\Programs\Driver Genius
These third-party driver installation programs tend to install incorrect and unstable drivers.

Install and perform full scans with:
information   Information
Remember to install the free version of Malwarebytes not the free trail; untick the free trial box during installation. MSE is the most lightweight and compatible with the Windows 7 operating system

Note   Note
Update all programs before scanning

You can also view this thread for a complete free and lightweight security protection combination:
1: kd> lmvm igdkmd64
start             end                 module name
fffff880`05ae2000 fffff880`05ffe1c0   igdkmd64 T (no symbols)           
    Loaded symbol image file: igdkmd64.sys
    Image path: igdkmd64.sys
    Image name: igdkmd64.sys
    Timestamp:        Sat Mar 09 02:10:00 2013 (513A99F8)
    CheckSum:         0052A265
    ImageSize:        0051C1C0
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Your onboard Intel Graphics seem to be causing some issues, check for any updates, or perform a clean install of the driver.
  1. Download Driver
  2. Start Type: Device Manager
  3. Expand Display Adapters
  4. Right-Click Driver Name, Uninstall
  5. Reboot
  6. Run Driver Sweeper
  7. Reboot
  8. Install Downloaded Driver
Driver Sweeper will scan for any left over files from the old driver, old driver files can cause conflicts with new driver installations. Create a System Restore point beforehand, in case any problems or issues arise.

Driver Sweeper:
My System SpecsSystem Spec
17 Apr 2013   #5

Windows 7 Ultimate x64

Thank you very much
It will be okey if I install windows 7 ultimate x64 again to everything will be clear. After this I will install only the intel graphics and nvidia driver ... if BSod returns I will attach ok?
My System SpecsSystem Spec
17 Apr 2013   #6

Windows 7 Ultimate x64

I tried to install a fresh windows 7 ultimate x64, and home premium x64 but, BSOD returned when I install... so i cant install anything now ...

this was an error: "page fault by a non-paged area"

I tried to use Ubuntu live Cd, to format partitions with Gparted, but now as well ubuntu come whit some error, and craches ... an still freezes.
The CPU can be bad ? I saw nice error messages in ubuntu withh CPU1 00000x02 an so and so
My System SpecsSystem Spec
17 Apr 2013   #7
x BlueRobot


The BSOD is more likely to be caused by the hard-drive or RAM, PAGE_FAULT_IN_NONPAGED_AREA, basically means the memory address which was referenced was not valid or didn't exist, therefore the data stored in virtual memory couldn't be paged into physical memory.

Now let's get to the troubleshooting process:Run Memtest86+ for least 7-8 passes, and preferably overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

Quote   Quote: Originally Posted by Arc View Post
It is a RAM, a bad RAM.

But if you have got a result like that:
It is a motherboard issue. The particular slot is bad.
Run some hard-drive diagnostics and follow these steps:Find your hard-drive manufacturer and run their tests.

Additional Tests:Post a screenshot of Crystal Disk Info summary:
Quote   Quote: Originally Posted by writhziden
If you have an SSD, make sure the following are up to date:
  • SSD firmware
  • BIOS Version
  • Chipset Drivers
  • Hard disk controller drivers/SATA drivers
  • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.
Check for any file system errors and bad sectors using Option #2 of:Use this command with Disk Check:

chkdsk C: /f /r
My System SpecsSystem Spec
17 Apr 2013   #8

Windows 7 Ultimate x64

Ok, memtest is running now, yesterday a cheched with this but only 1 pass I waited. And how to share a screenshot when I cant install any system to this laptop ? I runned drive chesks from Lenovo site, and UEFI tests but it seems everything is ok....
My System SpecsSystem Spec
17 Apr 2013   #9
x BlueRobot


A screenshot for what? Run MemTest86+ overnight, and then check the results in the morning.
My System SpecsSystem Spec
18 Apr 2013   #10

Windows 7 Ultimate x64

Soooo I checked, I waited very long time ... and I got 112 errors until now ... And then is sure to send back to the service centre? The laptop is new, and I have 12 moths guarantee...
My System SpecsSystem Spec

 Random BSOD after installing windows 7 ultimate x64 and drivers...

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
BSOD 'BAD_POOL_HEADER' After Installing Windows 7 Ultimate 64x
Hey guys, I installed Windows 7 Ultimate x64 yesterday and since then I've been getting frequent/random BAD_POOL_HEADER Blue Screens, see attached Log. Tell me if you require anymore info, thanks!
BSOD Help and Support
BSOD installing Windows 7 Ultimate X64, error 0x0000007e
Hello guys. i don't usually ask forums or join forums, because i like sorting out my own problems and not bothering other people with my problems, but i need someone that has really good knowledge of windows with this problems, i have been trying to instal windows 7 Ultimate x64 on my custom pc...
BSOD Help and Support
BSOD installing windows 7 Ultimate 32bit. error (don't know where)
This is what i have got after upgrading ram and HDD on my TOSHIBA L30-149. A problem has been detected and windows has been shut down to prevent damage to your computer. win32k.sys PAGE_FAULT_INNONPAGED_AREA If this is the first time you've seen this stop error screen, restart your...
BSOD Help and Support
BSOD when installing Windows 7 Ultimate (32-bit) checked build
Hi guys, I am trying to install the checked build version of Windows 7 Ultimate (32-bit) but I am receiving a BSOD with, "STOP: 0x0000007E (0xC0000420, 0x8A115A15, 0x89B86628, 0x89B86150)" even before the installation GUI is shown. The technical information message also shows, "ACPI.sys...
Installation & Setup
Installing drivers on new win7 64bit ultimate os
I have never installed a new os from start. Do i need to download drivers for my mobo ready for a fresh windows7 install? Or does it find them automatically on the windows disc? Or online later? I have drivers on disc for all other hardware, but not mobo. Just confused before I start.
General Discussion
Idiot installing Windows 7 Ultimate BSOD/nvidia drivers
Hi, I hope someone can help me, I'm not overly techy so I've give you as much info as I can. Trying to do a clean install of Windows 7 Ultimate on brand new pc with this spec: Intel® Core 2 Quad Q8300 Motherboard: Asus P5P43TD (Intel P43 chipset, 4x DDR3, PCI-E 2.0) Memory: 4GB DDR3...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 03:20.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App