Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD 0x00000124

22 Apr 2013   #11
MAGNEZ

Windows 7 Pro x64
 
 

It really was ALL fine before the format, also I have stress tested my CPU for about 90 minutes in Prime95 and also did some gaming for about 2-3 hours straight. There was NO crashes. Maybe I could format again? Also, I did something with mi hard drives yesterday. It was suppost to speed things up, dont know if it worked but this is what i did.




My System SpecsSystem Spec
.
22 Apr 2013   #12
Dsprague

Microsoft Community Contributor Award Recipient

Windows 7 enterprise 64 bit, Windows 7 Pro 64 bit ,Windows 8 64bit
 
 

Reinstall again if you like but chances are there is damage to your hardware, or your overclocking is causing the system to be come unstable all the re-installs in the world wont fix that.
My System SpecsSystem Spec
22 Apr 2013   #13
MAGNEZ

Windows 7 Pro x64
 
 

Quote   Quote: Originally Posted by Dsprague View Post
Reinstall again if you like but chances are there is damage to your hardware, or your overclocking is causing the system to be come unstable all the re-installs in the world wont fix that.
You know, Im just really suprised that it happened right after the last format
My System SpecsSystem Spec
.

22 Apr 2013   #14
carwiz

Windows 7 Pro-x64
 
 

The dump indicates a catastrophic failure but it is so bad that memory was too corrupt to complete the data collection for the dump. This could be caused by a CPU failure, chipset failure or corrupt memory modules.

I agree with Dsprague that you should revert to standard timings until your system is stable. There's a possibility that your disk drive could have corrupt files also due to the nature of corrupt memory. To run tests on your hardware, you'll need a stable system.

The following is for information only.

Code:
 
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa8008804028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000be200000, High order 32-bits of the MCi_STATUS value.
Arg4: 000000000005110a, Low order 32-bits of the MCi_STATUS value.
Debugging Details:
------------------
***** Debugger could not find nt in module list, module list might be corrupt, error 0x80070057.

BUGCHECK_STR:  0x124_GenuineIntel
CUSTOMER_CRASH_COUNT:  1
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
CURRENT_IRQL:  0
STACK_TEXT:  
fffff800`00ba8a98 fffff800`033fca3b : 00000000`00000124 00000000`00000000 fffffa80`08804028 00000000`be200000 : 0xfffff800`02e79c00
fffff800`00ba8aa0 00000000`00000124 : 00000000`00000000 fffffa80`08804028 00000000`be200000 00000000`0005110a : 0xfffff800`033fca3b
fffff800`00ba8aa8 00000000`00000000 : fffffa80`08804028 00000000`be200000 00000000`0005110a fffffa80`088eebd0 : 0x124

STACK_COMMAND:  kb
FOLLOWUP_NAME:  MachineOwner
MODULE_NAME: Unknown_Module
IMAGE_NAME:  Unknown_Image
DEBUG_FLR_IMAGE_TIMESTAMP:  0
BUCKET_ID:  CORRUPT_MODULELIST
Followup: MachineOwner
---------
0: kd> !errrec fffffa8008804028
===============================================================================
Common Platform Error Record @ fffffa8008804028
-------------------------------------------------------------------------------
Signature     : *** INVALID ***
Revision      : 0.0
Record Id     : 0000000000000000
Severity      : Recoverable (0)
Length        : 0
Creator       : {00000100-000f-0000-3600-000000000000}
Notify Type   : {00000100-000f-0000-3600-000000000000}
Flags         : 0x00000000
0: kd> lmnt
start             end                 module name
00000000`067b8040 00000000`0cf700c8   Unknown_Module_00000000_067b8040 Unknown_Module_00000000`067b8040 unavailable (00000000)
Missing image name, possible paged-out or corrupt data.
Missing image name, possible paged-out or corrupt data.
Unloaded modules:
000007fe`ea739e88 000007ff`00000000   Unknown_Module_000007fe`ea739e88
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  158C6178
Missing image name, possible paged-out or corrupt data.
Missing image name, possible paged-out or corrupt data.
Missing image name, possible paged-out or corrupt data.
000007fe`ea739e88 000007ff`00000000   Unknown_Module_000007fe`ea739e88
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  158C6178
Missing image name, possible paged-out or corrupt data.
Missing image name, possible paged-out or corrupt data.
Missing image name, possible paged-out or corrupt data.
000007fe`ea739e88 000007ff`00000000   Unknown_Module_000007fe`ea739e88
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  158C6178
Missing image name, possible paged-out or corrupt data.
My System SpecsSystem Spec
22 Apr 2013   #15
MAGNEZ

Windows 7 Pro x64
 
 

Quote   Quote: Originally Posted by carwiz View Post
The dump indicates a catastrophic failure but it is so bad that memory was too corrupt to complete the data collection for the dump. This could be caused by a CPU failure, chipset failure or corrupt memory modules.

I agree with Dsprague that you should revert to standard timings until your system is stable. There's a possibility that your disk drive could have corrupt files also due to the nature of corrupt memory. To run tests on your hardware, you'll need a stable system.

The following is for information only.

Code:
 
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa8008804028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000be200000, High order 32-bits of the MCi_STATUS value.
Arg4: 000000000005110a, Low order 32-bits of the MCi_STATUS value.
Debugging Details:
------------------
***** Debugger could not find nt in module list, module list might be corrupt, error 0x80070057.

BUGCHECK_STR:  0x124_GenuineIntel
CUSTOMER_CRASH_COUNT:  1
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
CURRENT_IRQL:  0
STACK_TEXT:  
fffff800`00ba8a98 fffff800`033fca3b : 00000000`00000124 00000000`00000000 fffffa80`08804028 00000000`be200000 : 0xfffff800`02e79c00
fffff800`00ba8aa0 00000000`00000124 : 00000000`00000000 fffffa80`08804028 00000000`be200000 00000000`0005110a : 0xfffff800`033fca3b
fffff800`00ba8aa8 00000000`00000000 : fffffa80`08804028 00000000`be200000 00000000`0005110a fffffa80`088eebd0 : 0x124

STACK_COMMAND:  kb
FOLLOWUP_NAME:  MachineOwner
MODULE_NAME: Unknown_Module
IMAGE_NAME:  Unknown_Image
DEBUG_FLR_IMAGE_TIMESTAMP:  0
BUCKET_ID:  CORRUPT_MODULELIST
Followup: MachineOwner
---------
0: kd> !errrec fffffa8008804028
===============================================================================
Common Platform Error Record @ fffffa8008804028
-------------------------------------------------------------------------------
Signature     : *** INVALID ***
Revision      : 0.0
Record Id     : 0000000000000000
Severity      : Recoverable (0)
Length        : 0
Creator       : {00000100-000f-0000-3600-000000000000}
Notify Type   : {00000100-000f-0000-3600-000000000000}
Flags         : 0x00000000
0: kd> lmnt
start             end                 module name
00000000`067b8040 00000000`0cf700c8   Unknown_Module_00000000_067b8040 Unknown_Module_00000000`067b8040 unavailable (00000000)
Missing image name, possible paged-out or corrupt data.
Missing image name, possible paged-out or corrupt data.
Unloaded modules:
000007fe`ea739e88 000007ff`00000000   Unknown_Module_000007fe`ea739e88
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  158C6178
Missing image name, possible paged-out or corrupt data.
Missing image name, possible paged-out or corrupt data.
Missing image name, possible paged-out or corrupt data.
000007fe`ea739e88 000007ff`00000000   Unknown_Module_000007fe`ea739e88
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  158C6178
Missing image name, possible paged-out or corrupt data.
Missing image name, possible paged-out or corrupt data.
Missing image name, possible paged-out or corrupt data.
000007fe`ea739e88 000007ff`00000000   Unknown_Module_000007fe`ea739e88
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  158C6178
Missing image name, possible paged-out or corrupt data.
Thanks, I'll try it now. Also, something weird happened to my GPU right now, it seemed that It crashed however in game only. I was playing Battlefield and all the colours got "funky" If oyu know what i mean. Bright green, red, blue, white all kinds of colours. The textures were there and I could play with stable 60-80fps however the colours were quiet badly messed up.

@Edit

Ok, turned everything right down In BIOS. The only thing turned on is "Performance Mode". CPU is jumping between 3.5GHz to 3.7GHz on desktop.
My System SpecsSystem Spec
22 Apr 2013   #16
carwiz

Windows 7 Pro-x64
 
 

First run SFC /scannow from an elevated command prompt so we know all the system files and Registry are intact. If you get any errors noted on the console, run it up to two more times then report back any messages.

Run Memtest86+ and follow the recommend procedure (Part 3) for individual modules if you get any errors.

If you pass those test, run a Check Disk on all disk drives to verify file structures.
My System SpecsSystem Spec
22 Apr 2013   #17
MAGNEZ

Windows 7 Pro x64
 
 

Quote   Quote: Originally Posted by carwiz View Post
First run SFC /scannow from an elevated command prompt so we know all the system files and Registry are intact. If you get any errors noted on the console, run it up to two more times then report back any messages.

Run Memtest86+ and follow the recommend procedure (Part 3) for individual modules if you get any errors.

If you pass those test, run a Check Disk on all disk drives to verify file structures.
Ok, No errors for /scannow and the disk check. I tried memtest which didnt workout as it should, although USB was set to boot first. Anyway, Im pretty sure its not a RAM problem. It seems that CPU overlocking might have coursed that, and Afterburner just added on to it. I could find a tutorial on a stable 4.5 GHz overclock, as my 4.6 was more or less from memory, Vcore might have been a bit unstable - As I said however, got no errors from Prime95.

Anyway, I would like to run the memtest sometime. Just dont know how to, I installed it on a memory stick and set the Boot menu in Bios to read from the USB first. Tried that three times with different settings and it didnt really work out.

Im not gonna overclock anything for the next few days and see what happens. If its a GPU fault, Im planning to buy a new one after summer holidays anyway.
My System SpecsSystem Spec
23 Apr 2013   #18
MAGNEZ

Windows 7 Pro x64
 
 

@BUMP

Also installed some drivers for motherboard.
My System SpecsSystem Spec
23 Apr 2013   #19
carwiz

Windows 7 Pro-x64
 
 

How did the Memtest go? Are you still getting a BSOD?
My System SpecsSystem Spec
23 Apr 2013   #20
MAGNEZ

Windows 7 Pro x64
 
 

Quote   Quote: Originally Posted by carwiz View Post
How did the Memtest go? Are you still getting a BSOD?
Dont even know how to run it tbh. It extracted and installed onto my Mem Stick, USB is set to first on BIOS and still no sign of anything. All the other test came out just fine.

Just Did an intel burn test "20 times", on 4.7 GHz and im 100% sure that it is not a CPU problem. Temperature did not go over 75 degrees.
My System SpecsSystem Spec
Reply

 Random BSOD 0x00000124




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD's 0x00000124
Hey all, I've been experiencing random BSOD's this past week. Seems to only happen either when I'm watching video or gaming. The computer will be useable for quite some time, anywhere from 1-4 hours, but then without warning, will crash. I have a Core i5-2500k that I have overclocked to 4.5...
BSOD Help and Support
Random BSOD 0x00000124
Hi, I've been getting BSOD on and off for the past 5 weeks. I'd get one playing a game, sometimes on Itunes, or just browsing the internet. I recently moved all my HDDs and SSD over to a new build. However, I decided not to format the OS drive and everything seemed to work smoothly. My first...
BSOD Help and Support
BSOD happens random, 0x00000124
Hi all! I have seen this forum for quite a while, very usefull tips and help! But now I have a problem I can't fix myself... My PC specs: Processor: AMD Phenom II x6 @3.2Ghz with stock cooler Motherboard: Gigabyte GA-990XA-UD3 rev 1.0 Memory: Corsair Vengeance 4x4Gb @ 1333Mhz Power:...
BSOD Help and Support
Random BSOD 0x00000124
Hey Guys I am getting BSOD a lot, at random times especially, sometimes when I am playing a game or watching a video. I have tried all most everything I have attached both the files into a ZIP file, which can be viewed below! Any help will be great! :) -Blair
BSOD Help and Support
Random BSOD, error 0x00000124
BSOD while doing remote connect to two office computers, browsing internet and watching King Crimson video. I have done the same thing many times without a problem. It didn't seem like it was overheating - or working hard. I am running Windows 7 Pro 64 bit, which I reinstalled fresh a few months...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:23.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App