Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD when start windows, error 0x0000006b,caused by driver ntoskrnl.ex

17 Apr 2013   #1
rafky

Windows 7 Home Premium x64 SP1
 
 
BSOD when start windows, error 0x0000006b,caused by driver ntoskrnl.ex

Hi,
I need your help, got startup problem like in title. Computer works, but when I tried to reboot, the BSOD comes out and I must start system using my backup file. Please help or comments. I don't know how to change that driver file or disable it. I think it may works..
Thx for everything


My System SpecsSystem Spec
.

17 Apr 2013   #2
x BlueRobot

 

My System SpecsSystem Spec
17 Apr 2013   #3
carwiz

Windows 7 Pro-x64
 
 

Yeah, follow the BSOD instructions at the top of the page and run the utility if you can. The "dump.txt" wasn't of much help in pinpointing the problem but here's where to start looking if you can't boot the machine.

0x6B - PROCESS1_INITIALIZATION_FAILED = This bug check indicates that the initialization of the Microsoft Windows operating system failed.

Any part of the disk subsystem can cause the PROCESS1_INITIALIZATION_FAILED bug check, including bad disks, bad or incorrect cables, mixing different ATA-type devices on the same chain, or drives that are not available becuase of hardware regeneration.

This bug check can also be caused by a missing file from the boot partition or by a driver file that a user accidentally disabled in the Drivers tab.
My System SpecsSystem Spec
.


17 Apr 2013   #4
rafky

Windows 7 Home Premium x64 SP1
 
 

ok, I've got something.
My System SpecsSystem Spec
18 Apr 2013   #5
carwiz

Windows 7 Pro-x64
 
 

The dump is inconclusive but it verifies that Windows boot never made it out of Session 0 start up. This is past boot manager so the disk MBR is probably ok. The user Session 1 didn't start which is controlled by SMSS (Session Manager). This would lead me to believe that some of the user kernel drivers are missing or corrupt.

You didn't happen to run a MalwareBytes Antimalware update on the 15th and scan did you? There was a known problem that day that caused the scan to delete Windows system files.

Since the system can't boot without the necessary drivers, I suggest you might try a Repair Install of Windows.
My System SpecsSystem Spec
18 Apr 2013   #6
rafky

Windows 7 Home Premium x64 SP1
 
 

i don't have a CD with WIN 7 so i can't do that. Scan of Malvarebytes AntiMalvare found several objects that i delete. This won't help. Now i'm thinking of recover my laptop to factory defalut...
My System SpecsSystem Spec
19 Apr 2013   #7
x BlueRobot

 

Follow the first few steps of this tutorial to create a installation DVD, which you can then boot into the System Recovery Options and then perform a Repair Install.
My System SpecsSystem Spec
Reply

 BSOD when start windows, error 0x0000006b,caused by driver ntoskrnl.ex




Thread Tools





Similar help and support threads
Thread Forum
BSOD error 0x000000f4 caused by driver ntoskrnl.exe
Hello all, I recently built a new PC within the last two weeks. The code I get, everytime, is 0x000000f4, and according to BlueScreenView this is caused by ntoskrnl.exe. For the first couple days, it was running fine with no problems. The past week and a half, though, I've been getting BSOD at...
BSOD Help and Support
BSOD caused by driver ntoskrnl.exe
Hello, I'm writing this post in order to ask your help regarding a BSOD thas has been happening in my computer in the last week. I've seen the information with the program Bluescreenview and I can post the information: LAST ONE ==================================================...
BSOD Help and Support
BSOD caused by driver ntoskrnl.exe
I've tried using Bluescreenview to try and solve this issue on my own but haven't been able to. I've had a BSOD from this driver about 6 times in the past month. Sometimes while playing games or just browsing the internet. I hope I have provided all the information, if not please let me know....
BSOD Help and Support
BSOD randomly on start up error 0x0000006b
My computer gets the BSOD on startup then reboots endlessly. If I click on Repair the computer it says Windows was unable to fix the Computer. So I restored it to an earlier Restore Point just so it can boot up. I havent installed any new hardware lately so I dont think it is a hardware problem?...
BSOD Help and Support
BSOD caused by driver NTOSKRNL.exe
Hi, I have an HP Pavilion DV5-2074dx. It is about a year old. I bought the computer and took it with me to IRaq. I came home and had the computer serviced for a cracked screen. At the repair facility I had them upgrade the memory for me. I double the available memory tp 6. These are my computer...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:35.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App