recurring BSOD, errors: 0x00000024 and 0x00000003B

Appdata\Local\Temp is a protected operating system file under C: Users\Username ... hidden by default. So the OP is to first go to folder options,then unhide protected OS files (which is against system recommendations, may be heavy for noobs) and then delete it?

What I wanted to know is how you identified it as a problem?

There shouldn't be any ?? in front of C:\ if there is a ? in front then there is an issue there.

But if he wants he could leave it there. Is dmp files point to

Code:

*******************************************************************************
*                                                                                                                                           *
*                        Bugcheck Analysis                                                                                           *
*                                                                                                                                           *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000040, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
	bit 0 : value 0 = read operation, 1 = write operation
	bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002ade0d8, address which referenced memory

Debugging Details:
------------------

TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2

WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002d07100
GetUlongFromAddress: unable to read from fffff80002d071c0
 0000000000000040 Nonpaged pool

CURRENT_IRQL:  2

FAULTING_IP: 
nt!KiTryUnwaitThread+28
fffff800`02ade0d8 f0480fba6b4000  lock bts qword ptr [rbx+40h],0

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

BUGCHECK_STR:  0xA

PROCESS_NAME:  svchost.exe

Code:

FOLLOWUP_IP: 
NETIO!NsiGetAllParametersEx+258
fffff880`019a2c08 8bf8            mov     edi,eax

SYMBOL_STACK_INDEX:  b

SYMBOL_NAME:  NETIO!NsiGetAllParametersEx+258

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: NETIO

IMAGE_NAME:  NETIO.SYS

DEBUG_FLR_IMAGE_TIMESTAMP:  5034f6a0

FAILURE_BUCKET_ID:  X64_0xA_NETIO!NsiGetAllParametersEx+258

BUCKET_ID:  X64_0xA_NETIO!NsiGetAllParametersEx+258

Followup: MachineOwner

Code:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80002dd7074, Address of the instruction which caused the bugcheck
Arg3: fffff88007b4bdc0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------

TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".

FAULTING_IP: 
nt!ObpIncrementHandleCountEx+34
fffff800`02dd7074 0000            add     byte ptr [rax],al

CONTEXT:  fffff88007b4bdc0 -- (.cxr 0xfffff88007b4bdc0)
rax=0000000000000005 rbx=fffff88007b4c9c0 rcx=0000000000000001
rdx=fffff88007b4c8b0 rsi=0000000000000000 rdi=fffff8a00147d650
rip=fffff80002dd7074 rsp=fffff88007b4c7a0 rbp=0000000000000000
 r8=0000000000000000  r9=fffff8a00147d680 r10=0000000000000000
r11=0000000000000001 r12=0000000000000000 r13=0000000000000000
r14=0000000000000001 r15=fffffa800acd3060
iopl=0         nv up ei ng nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010286
nt!ObpIncrementHandleCountEx+0x34:
fffff800`02dd7074 0000            add     byte ptr [rax],al ds:002b:00000000`00000005=??
Resetting default scope

Code:

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

BUGCHECK_STR:  0x3B

PROCESS_NAME:  spoolsv.exe

CURRENT_IRQL:  0

MISALIGNED_IP: 
nt!ObpIncrementHandleCountEx+34
fffff800`02dd7074 0000            add     byte ptr [rax],al

LAST_CONTROL_TRANSFER:  from fffff80002dd6abc to fffff80002dd7074

STACK_TEXT:  
fffff880`07b4c7a0 fffff800`02dd6abc : fffffa80`00000001 fffff880`07b4c8b0 fffffa80`0acd3060 fffff8a0`0147d680 : nt!ObpIncrementHandleCountEx+0x34
fffff880`07b4c860 fffff800`02dc87a9 : 00000000`00000001 fffff8a0`0147d680 00000000`00000000 fffff800`02deb800 : nt!ObpCreateHandle+0x19c
fffff880`07b4c970 fffff800`02db79d4 : fffff880`07b4cca0 00000000`00020002 fffff8a0`0147d680 00000000`00020002 : nt!ObOpenObjectByPointerWithTag+0x109
fffff880`07b4cb90 fffff800`02adae93 : fffffa80`0c297060 fffffa80`00020002 00000000`00000000 00000000`02ece7a8 : nt!NtOpenProcessTokenEx+0x114
fffff880`07b4cc20 00000000`772022da : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`02ece478 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x772022da


FOLLOWUP_IP: 
nt!ObpIncrementHandleCountEx+34
fffff800`02dd7074 0000            add     byte ptr [rax],al

SYMBOL_STACK_INDEX:  0

SYMBOL_NAME:  nt!ObpIncrementHandleCountEx+34

FOLLOWUP_NAME:  MachineOwner

IMAGE_NAME:  hardware

DEBUG_FLR_IMAGE_TIMESTAMP:  0

STACK_COMMAND:  .cxr 0xfffff88007b4bdc0 ; kb

MODULE_NAME: hardware

FAILURE_BUCKET_ID:  X64_IP_MISALIGNED

BUCKET_ID:  X64_IP_MISALIGNED

Followup: MachineOwner

Please read it.

Note File I/O functions in the Windows API convert "/" to "\" as part of converting the name to an NT-style name, except when using the "\\?\" prefix as detailed in the following sections.
The Windows API has many functions that also have Unicode versions to permit an extended-length path for a maximum total path length of 32,767 characters. This type of path is composed of components separated by backslashes, each up to the value returned in the lpMaximumComponentLength parameter of the GetVolumeInformation function (this value is commonly 255 characters). To specify an extended-length path, use the "\\?\" prefix. For example, "\\?\D:\very long path".
Note The maximum path of 32,767 characters is approximate, because the "\\?\" prefix may be expanded to a longer string by the system at run time, and this expansion applies to the total length.
The "\\?\" prefix can also be used with paths constructed according to the universal naming convention (UNC). To specify such a path using UNC, use the "\\?\UNC\" prefix. For example, "\\?\UNC\server\share", where "server" is the name of the computer and "share" is the name of the shared folder. These prefixes are not used as part of the path itself. They indicate that the path should be passed to the system with minimal modification, which means that you cannot use forward slashes to represent path separators, or a period to represent the current directory, or double dots to represent the parent directory. Because you cannot use the "\\?\" prefix with a relative path, relative paths are always limited to a total of MAX_PATH characters.
There is no need to perform any Unicode normalization on path and file name strings for use by the Windows file I/O API functions because the file system treats path and file names as an opaque sequence of WCHARs. Any normalization that your application requires should be performed with this in mind, external of any calls to related Windows file I/O API functions.
When using an API to create a directory, the specified path cannot be so long that you cannot append an 8.3 file name (that is, the directory name cannot exceed MAX_PATH minus 12).
The shell and the file system have different requirements. It is possible to create a path with the Windows API that the shell user interface is not able to interpret properly.
Namespaces

There are two main categories of namespace conventions used in the Windows APIs, commonly referred to as NT namespaces and the Win32 namespaces. The NT namespace was designed to be the lowest level namespace on which other subsystems and namespaces could exist, including the Win32 subsystem and, by extension, the Win32 namespaces. POSIX is another example of a subsystem in Windows that is built on top of the NT namespace. Early versions of Windows also defined several predefined, or reserved, names for certain special devices such as communications (serial and parallel) ports and the default display console as part of what is now called the NT device namespace, and are still supported in current versions of Windows for backward compatibility.
Win32 File Namespaces

The Win32 namespace prefixing and conventions are summarized in this section and the following section, with descriptions of how they are used. Note that these examples are intended for use with the Windows API functions and do not all necessarily work with Windows shell applications such as Windows Explorer. For this reason there is a wider range of possible paths than is usually available from Windows shell applications, and Windows applications that take advantage of this can be developed using these namespace conventions.
For file I/O, the "\\?\" prefix to a path string tells the Windows APIs to disable all string parsing and to send the string that follows it straight to the file system. For example, if the file system supports large paths and file names, you can exceed the MAX_PATH limits that are otherwise enforced by the Windows APIs. For more information about the normal maximum path limitation, see the previous section Maximum Path Length Limitation.
Because it turns off automatic expansion of the path string, the "\\?\" prefix also allows the use of ".." and "." in the path names, which can be useful if you are attempting to perform operations on a file with these otherwise reserved relative path specifiers as part of the fully qualified path.
Many but not all file I/O APIs support "\\?\"; you should look at the reference topic for each API to be sure.

Source: Naming Files, Paths, and Namespaces
It appears to be not an issue, but a long path.