Code:
BugCheck 9F, {3, fffffa8004d97060, fffff80000b9c3d8, fffffa8009e4ac60}
*** WARNING: Unable to verify timestamp for athrx.sys
*** ERROR: Module load completed but symbols could not be loaded for athrx.sys
Probably caused by : athrx.sys
Code:
0: kd> !irp fffffa8009e4ac60
Irp is active with 5 stacks 3 is current (= 0xfffffa8009e4adc0)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 0 fffffa800805d050 00000000 00000000-00000000
\Driver\athr
Args: 00014400 00000000 00000004 00000002
[ 16, 2] 0 e1 fffffa8007bcfe10 00000000 fffff800032c9200-fffffa8004ab52e0 Success Error Cancel pending
\Driver\vwifibus nt!PopSystemIrpCompletion
Args: 00014400 00000000 00000004 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa8004ab52e0
Code:
0: kd> lmvm nvlddmkm
start end module name
fffff880`060c8000 fffff880`06b73000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Fri Mar 15 01:37:00 2013 (51427B3C)
CheckSum: 00A8D47C
ImageSize: 00AAB000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
The same two drivers seem to causing issues, I would suggest checking if there is any physically wrong with the graphics card by using:
Graphics Card:
Warning
Read all the steps within the hardware test tutorials very carefully, as stress tests is designed run components to their maximum capacity, in order to point out failing or faulty hardware components.
Use the following program to monitor your hardware temperatures during the stress test:
What is the driver version and timestamp of the Atheros driver on the Acer support page for your model?