4+ BSOD/day playing TERA/FFXI [ntoskrnl.exe, rdpbus.sys, Wdf01000.sys]

BSOD everyday · Apr 27, 2013

I've been getting a lot of BSOD's ever since I built my PC in 2010, but lately its frequency has rapidly increased.

It mostly happen when I alt-tab, or scroll up/down, or zone into a new area in-game. Sometimes a simple click would do it too.

BlueScreenView shows this: (It stopped recording new BSOD dumps for some reason)

This might not be related, but I've also been having driver issues ever since I built the PC: Whenever I shutdown/restart/BSOD my PC, several USB connected devices get a yellow "flag" in the Device Manager, and I have to uninstall them one by one then restart my PC one more time to get my USB devices working again, such as headset, PS3 controller (USB connected using offline motioninjoy drivers). While those devices are down, my wireless keyboard and mouse still work though, despite being connected via a USB bluetooth dongle, so not all devices stop working. This problem is particularly annoying because I have to through this tedious process every time I BSOD, and it usually happens in in 2-3 successions, meaning I'll BSOD while playing -> reboot -> uninstall drivers so I can get my devices to work again -> reboot -> BSOD within 1 minute -> rinse and repeat til stable (at least until the next BSOD, which normally occurs within 5-12 hours)

What should I do?

koolkat77 · Apr 27, 2013

Your BSOD's are dated 13-Apr-2013 which were probably caused by: MotioninJoy simulate Xbox 360 controller (virtual Xinput device)

I would suggest to check for an update on this devices software, if not temporarily uninstall and see if that stops the BSOD's.

Revo Uninstaller

Download and install Revo Uninstaller free from here: Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Opt for "Advanced Mode" and uninstall the software (also delete the leftover registry entries). If required, reinstall the latest version available from the mfg website or a good source like filehippo.com

Virus check

Scan your system with the following

Kaspersky TDSSKiller How to remove malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon)

ESET online scanner One-time virus scanner free with ESET online scanner

Daemon Tools/Alcohol %

Uninstall DAEMON Tools and/or Alcohol % software. It uses a driver called sptd.sys which is known to cause BSODs in Windows 7. Uninstall the software using Add/Remove Programs. Reboot the system. Once the program is uninstalled, run sptd.sys uninstaller to remove the driver from your system.

Code:

Start Menu\Programs\DAEMON Tools Lite	Public:Start Menu\Programs\DAEMON Tools Lite	Public

As an alternative, many people recommend the use of Total Mounter or Magic ISO

Overclocking

If you are overclocking any hardware, STOP. Reset any changed values back to default.

Code:
This is overclocking software and can lead to system instability and BSOD's. Please reset all components to their stock speeds and then remove the software.

Code:

Start Menu\Programs\MSI Afterburner Anmar-PC\Anmar:Start Menu\Programs\MSI Afterburner Anmar-PC\Anmar Start Menu\Programs\MSI Afterburner\SDK Anmar-PC\Anmar:Start Menu\Programs\MSI Afterburner\SDK Anmar-PC\Anmar

Follow this:

writhziden said:
If you have an SSD, make sure the following are up to date:

SSD firmware

BIOS Version

Chipset Drivers

Hard disk controller drivers/SATA drivers

If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

Please run these tests and report back the results

1. SFC /scannow to check windows for corruption - http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html
2. Disk check for errors on the hard drive - http://www.sevenforums.com/tutorials/433-disk-check.html
3. Troubleshoot applications by a clean boot - http://www.sevenforums.com/tutorial...ation-conflicts-performing-clean-startup.html
4. Memtest86+ paying close attention to part 3 - http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html
5. Hard drive test from HDD mfg website - Hard Drive Diagnostic Procedure

Analysis

The below is for information purposes only. Contains relevant information from the blue screen analysis:

Code:

[FONT="Lucida Console"]Debug session time: Sun Apr 14 11:34:42.682 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\041313-15709-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:59:58.619
*** WARNING: Unable to verify timestamp for MijXfilt.sys
*** ERROR: Module load completed but symbols could not be loaded for MijXfilt.sys
Probably caused by : MijXfilt.sys ( MijXfilt+363a )
BugCheck 10D, {5, 0, 1202, fffffa8007f39240}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x0000010D]WDF_VIOLATION (10d)[/url]
Bugcheck code 0000010D
Arguments: 
Arg1: 0000000000000005, A framework object handle of the incorrect type was passed to
	a framework object method.
Arg2: 0000000000000000, The handle value passed in.
Arg3: 0000000000001202, Reserved.
Arg4: fffffa8007f39240, Reserved.
BUGCHECK_STR:  0x10D_5
PROCESS_NAME:  DS3_Tool.exe
FAILURE_BUCKET_ID:  X64_0x10D_5_MijXfilt+363a
MaxSpeed:     3070
CurrentSpeed: 3051
BiosVersion = 6.00 PG
BiosReleaseDate = 08/25/2011
SystemManufacturer = OEM
SystemProductName = OEM
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sun Apr 14 10:30:51.614 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\041313-59171-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 7:14:13.535
*** WARNING: Unable to verify timestamp for MijXfilt.sys
*** ERROR: Module load completed but symbols could not be loaded for MijXfilt.sys
Probably caused by : MijXfilt.sys ( MijXfilt+363a )
BugCheck 10D, {5, 0, 1202, fffffa8007fe8c10}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x0000010D]WDF_VIOLATION (10d)[/url]
Bugcheck code 0000010D
Arguments: 
Arg1: 0000000000000005, A framework object handle of the incorrect type was passed to
	a framework object method.
Arg2: 0000000000000000, The handle value passed in.
Arg3: 0000000000001202, Reserved.
Arg4: fffffa8007fe8c10, Reserved.
BUGCHECK_STR:  0x10D_5
PROCESS_NAME:  DS3_Tool.exe
FAILURE_BUCKET_ID:  X64_0x10D_5_MijXfilt+363a
MaxSpeed:     3070
CurrentSpeed: 3051
BiosVersion = 6.00 PG
BiosReleaseDate = 08/25/2011
SystemManufacturer = OEM
SystemProductName = OEM
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨`[/FONT]`

4+ BSOD/day playing TERA/FFXI [ntoskrnl.exe, rdpbus.sys, Wdf01000.sys]

BSOD everyday

New member

My Computer

At a glance

koolkat77

New member

My Computer

At a glance

Similar threads

4+ BSOD/day playing TERA/FFXI [ntoskrnl.exe, rdpbus.sys, Wdf01000.sys]

BSOD everyday

New member

My Computer My Computer

At a glance

koolkat77

New member

My Computer My Computer

At a glance

Similar threads

My Computer

My Computer