Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD at i5 2nd cores' 2nd thread 100% usage

29 Apr 2013   #11
x BlueRobot

 

Okay, leave the thread open for a few days.

With Windows Blue, I think they're completely removing the Start menu (or what is left of it) all together with the desktop.


My System SpecsSystem Spec
.
30 Apr 2013   #12
dairix1

Windows 7 Ultimate x64
 
 

Sooooo.... I had total 2 BSOD's!

At 1st BSOD I left DrWeb Cure It, on complete - custom scan, on full protection mode (it had never completed!!! nor now nor before on my new laptop)
At 2nd time I left uTorrent running - this is also ALWAYS happening when I am leaving downloading and uploading for some time (most of the time when I am not at home)
Well, on the positive side, at least it is rarely crashing when I am working on my laptop. (rarely, but not all of the time)
P.s I uploaded an image of BSOD viewer as attachment - for some reason imageshack is not working right now.

Now I'll be going to the rural area - so maybe will have some network connection problems!

Is it possible that this is a problem in hardware not in software? Warranty repair/check will be ongoing for some month or two, but I am still considering to do this after doing all of my reports! But the problem is that I will need to delete my Windows and format HDD - because of some confidential documents (can't risk them to be exposed), so they wont be able to check laptop with my system configuration (IF they are doing that, idk)!

Btw THANK YOU guys for helping me!!!
My System SpecsSystem Spec
30 Apr 2013   #13
x BlueRobot

 

My System SpecsSystem Spec
.

30 Apr 2013   #14
dairix1

Windows 7 Ultimate x64
 
 

Here are all of BSOD's including the 2 new ones!
My System SpecsSystem Spec
30 Apr 2013   #15
x BlueRobot

 

Code:
BugCheck 9F, {3, fffffa80069f4a10, fffff800044c33d8, fffffa80083df430}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : pci.sys
Code:
0: kd> lmvm nvlddmkm
start             end                 module name
fffff880`0f06f000 fffff880`0fd6f000   nvlddmkm T (no symbols)           
    Loaded symbol image file: nvlddmkm.sys
    Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp:        Fri Oct 12 06:22:51 2012 (5077A92B)
    CheckSum:         00CE30F1
    ImageSize:        00D00000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
It appears that you haven't updated your graphics card driver suggested in my first post, you will want to update to the latest WHQL driver, using the nVIDIA download page - NVIDIA Driver Downloads - Advanced Search

I've managed to find the correct driver for the graphics card specified within your system specifications, see the attachment for the values you will need to enter into the search fields:

Attachment 266141
My System SpecsSystem Spec
30 Apr 2013   #16
dairix1

Windows 7 Ultimate x64
 
 

"For the graphics driver - I have the Intel 4000HD and Nvidia GT 730M, so the newest drivers form nvidia website shows that I don't have compatible graphics hardware. I'll try to download the newest drivers for Windows 7 x64 from ACER support page "Version 9.18.13.0717" Acer | Download for V3-571G."

Maybe some tutorial how to install newest driver from Nvidia website and still be able to keep Intel HD for low power consumption? Because I can't install those official Nvidia drivers.

P.s I tried to disable Intel HD, but this is set as default VGA - so I was disabling my display.
My System SpecsSystem Spec
01 May 2013   #17
dairix1

Windows 7 Ultimate x64
 
 

Just now I uninstalled Daemon Tools (SPTDinst is showing that it is uninstalled) AND replaced AVG (removed by AVG removal tool) with the Microsoft security essentials!

I'll try to leave my laptop running by night - with enabled full virus scan of the DrWeb CureIt!
My System SpecsSystem Spec
01 May 2013   #18
x BlueRobot

 

Okay, even though I suggested removing those two programs in my first post, please post a screenshot of your Device Manager with Display section expanded:
My System SpecsSystem Spec
02 May 2013   #19
dairix1

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by x BlueRobot View Post
Okay, even though I suggested removing those two programs in my first post, please post a screenshot of your Device Manager with Display section expanded:

I was using these two programs for years and had no problems using them on my or my friends PC's, so that's obviously I did not wanted to remove them.

You meant display adapters?
My System SpecsSystem Spec
02 May 2013   #20
x BlueRobot

 

I don't see the issue of incompatible hardware when installing driver, since Windows is recognizing the device as being installed and working correctly

I would say uninstall the driver for the device completely, and then attempt a clean install of the driver, however, since the driver program is not recognizing the driver then I will ask for others to suggest a alternative or better option.
My System SpecsSystem Spec
Reply

 BSOD at i5 2nd cores' 2nd thread 100% usage




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD when 6 cores are working
Hello everyone I have a problem i bought the bulldozer fx 6 with 4gb RAM as a bundle and my problem is that when my 6 cores are activated i either get BSOD or just complete freeze im running Radeon HD 6770 as GPU. I have attached mini dump as instructed any help would be appreciated. System...
BSOD Help and Support
BSOD's when i5 2400 running on all 4 cores.
Hello Seven forums, I have been experiencing BSOD's (Mostly Driver_IRQL,Memory_Management) on my PC.This is the 3rd thread that i have started for this error with no avail and my hope is faltering.Pls look into this issue i do not want to buy another 300$ processor .In our country $300 is more...
BSOD Help and Support
hal.dll BSOD on AMD Phenom II (6 cores) 64
I built a new computer 1 year ago on an Asus M4A89TD PRO/USB3 motherboard with a Phenom II AMD64 6 cores CPU running at 3.2 GHz. The OS is : Windows 7 Service Pack 1, 6.1, build: 7601 full retail. I recently and repeatedly encountered a crash on my system when using photoshop cs4/bridge...
BSOD Help and Support
BSOD with cores 3 or 4
Hi, I need some advice. Built new PC using ASUS M479XTD AVO and Phenom 944 X4, only 1 Gb of DDR3 and a Radeon HD 4670, PSU is Artic 500. After some initial problems trying to install XP, I gave up and bought Windows 7 Pro 32 bit. This was a clean install which was completed without any...
BSOD Help and Support
bsod on more then 2 cores
Well I have run the computer in the verify mode and the following dumpfile is the result. It would not even get to the splash screen. It crashed twice but only produced one dump file. I was able to finaly get windows booted up by turning core 3 and 4 off. Hopefully the dump file will reveal a...
BSOD Help and Support
bsod on more then 2 cores
I have several dumps below that accured in about a hours time. I only have the bsod if I run 3 or more cores.Win7 ultimate 32 bit would not even install with anymore then 2 cores running. The board is a BFG680i with latest bios, 4 gig corsair memory ( has been memtest several times).q9550 quad core...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:57.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App