Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD After every startup. Works fine until the next day.

07 May 2013   #11
thatsmywhitemam

California
 
 

Well, I thought I was all done with this but they are back again. For the past couple of days I've had BSODS the same way after a fresh start up( Approx 5 minutes after fully starting up). I've tried rolling back to the earliest recovery I had and still get the issue. I uploaded a .zip for the new files taken by the "SF Diagnostics Tool" Thank you for your time.


My System SpecsSystem Spec
.
07 May 2013   #12
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

The BSOD you uploaded on Post 11 is pointing to your video card driver
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff3000b965158, 1, fffff8800737a6ff, 7}

*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys

Could not read faulting driver name
Probably caused by : atikmdag.sys ( atikmdag+15e6ff )

Followup: MachineOwner
BSOD date is 4/29/13

There isn't any more recent BSODs?
My System SpecsSystem Spec
07 May 2013   #13
thatsmywhitemam

California
 
 

Strange... I had a Bluescreen today and a .dmp file wasn't created. I had this problem before I did a complete re install of windows. I have everything set up right as far as I know here' a picture of my "System Failure" settings. I'll make sure to write it down next time or take a picture of it with my camera. I'm 90% sure I saw this error at the top though "IRQL_NOT_LESS_OR_EQUAL_TO"
My System SpecsSystem Spec
.

07 May 2013   #14
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

I believe it has to be



With auto restart unchecked.
My System SpecsSystem Spec
07 May 2013   #15
thatsmywhitemam

California
 
 

Ok, done. I will be back with results tomorrow.
My System SpecsSystem Spec
07 May 2013   #16
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

Could the OP having this installed cause a problem.
Gridinsoft located in System Specs. under Anti Virus.
My System SpecsSystem Spec
07 May 2013   #17
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

I'd remove that software Layback Bear
My System SpecsSystem Spec
08 May 2013   #18
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

My System SpecsSystem Spec
08 May 2013   #19
thatsmywhitemam

California
 
 

Quote   Quote: Originally Posted by koolkat77 View Post
  • {SOFTWARE} Although at the moment I have lots of games loaded in and software, I had this exact BSOD problem after a format and fresh install of Windows 7.
  • {WHAT ACTIONS CAUSE THE PROBLEM}
  • {GENERAL SYSTEM PERFORMANCE} I just downloaded "gimps" and i'll run it tonight.
  • {OVERHEATING} I have never had a problem with overheating
  • {VIDEO DRIVERSI'll} try doing the video drivers again since I do not remember deleting the file after uninstalling.
  • {VIDEO DRIVERS}Devise manager had no yellow "!" icons ( Including showing hidden devises)
  • {Devise Manager} No (yellow ! icons) Even under hidden devises.
  • {Poor Connections}- It looks clean and but I'll take it out and clean it later tonight just to be safe.
  • {CHECK YOUR MOTHERBOARD VOLTAGES} Never done that before but i'll try it out.
  • {MEMORY} I've already ran memtest 86 overnight 6 or 7 days back.
  • {OVERCLOCKING} I am not overclocking right now
  • {Underclocking} So keep the clocks ending in "50" and "00" ?
  • {Bios} I've always feared updating bios because of the stories of people bricking their boards.
  • {Windows Power Mangement} Set to High Performance
  • {PowerSupply} My buddy has a multi-meter, so i'll test that next time I see him.
  • {VideoCard} My dad loaned me his gtx 520 card and I had the same problems I did with my 7850. He never had this problem with his card.

Are there any Motherboard test that are reliable? I thought I'd ask here first.
My System SpecsSystem Spec
08 May 2013   #20
thatsmywhitemam

California
 
 

And here's the new .dmp file from today.
My System SpecsSystem Spec
Reply

 BSOD After every startup. Works fine until the next day.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD GTX 260, works fine in safe mode.
Hi!! I have a BFG GTX 260 video card, when I turn it on in normal mode it displays BSOD but when I turn it on in safe mode it works fine, my motherboard (MSI K9N2 Diamond) has 3 PCI-Ex slots I tried all of them but it still crashes. I also uninstalled and installed the video drivers but no luck,...
BSOD Help and Support
BSOD on startup - but can run in safe mode fine
Hi all, About a week ago I started getting this BSOD on startup, happening at about the time consistently every time I boot Windows normally when the Windows login screen appears (if I login immediately, the BSOD happens right afterwards - sometimes the desktop can display in time; if I wait at...
BSOD Help and Support
BSOD on formatting 3TB HD connected with e-Sata / USB works fine
Got a new 3TB HD today which I use as external drive. When I connect it with USB it seems to work fine. Windows sees it and I can format it. When I conntect it with e-Sata, Windows says the Drive needs to be reformatted. As soon as I start a Quick format, Windows gives me an BSOD That's a...
BSOD Help and Support
BSOD upon logging into Windows 7, Safe Mode works fine.
I got a BSOD, and now upon logging into Win 7 I get a BSOD each time unless I go into Safe Mode which is working fine, I uploaded the dump file that I got from the program from this site. I did run Malwarebytes in QuickScan and no malware was found. Should I scan for a virus? My PC is... ...
BSOD Help and Support
BSOD Stop 50 (once 51) after logging in; Safe mode works fine
Hello. First of all, sorry about just registering and asking a question - I don't like it much, but I've been unable to solve this on my own, and I've run out of places to look for answers. Specs (Fujitsu Amilo Pi 3660): 2 years old OS: Windows 7 Home Premium x64 (last reinstalled about 6...
BSOD Help and Support
BSOD 4gb ram - Works fine with 2gb
4gb ram bsod on startup or a few minutes later. I tried every combination slots and sticks have no problems. (2 slots, 2x 2gb sticks) ---Additionally, in the little time i had on 4gb ram boot i saw that only 2,94 gb memory is usable. Is Windows 7 . . . - x86 (32-bit) or x64 ?
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 00:59.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App