Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD After every startup. Works fine until the next day.

08 May 2013   #21
cipley

Windows 7
 
 

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {ffffffffc000001d, fffff88000d0e6d6, 0, 0}

Probably caused by : memory_corruption

Followup: memory_corruption
---------

1: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
...I'll leave it to the others, as this is too general for me to determine the cause

@all
anythoughts?


My System SpecsSystem Spec
.
08 May 2013   #22
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Stress Test

Hardware - Stress Test With Prime95: Hardware - Stress Test With Prime95

CPU - Stress Test Using IntelBurnTest: CPU - Stress Test Using IntelBurnTest

Video Card - Stress Test with Furmark: Video Card - Stress Test with Furmark

Monitor temperature of the system during the tests: Speccy - System Information - Free Download
My System SpecsSystem Spec
09 May 2013   #23
thatsmywhitemam

California
 
 

No BSOD today, strangely. But here's the intelburntest and furmark. I have not ran the prime95 test yet.
My System SpecsSystem Spec
.

09 May 2013   #24
thatsmywhitemam

California
 
 

Quote   Quote: Originally Posted by jefflevay0 View Post
I turned off the public folder sharing.[img]http://gawab.*******.com/6.jpg[/img]
[img]http://gawab.*******.com/7.jpg[/img]
[img]http://gawab.*******.com/8.jpg[/img]
[img]http://gawab.*******.com/9.jpg[/img]
What?
My System SpecsSystem Spec
15 May 2013   #25
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

So have you got any new bsod?
My System SpecsSystem Spec
18 May 2013   #26
thatsmywhitemam

California
 
 

Yes actually I have a few new ones Ill .zip up. I'm starting to really consider it being my power supply causing the issue. For the first time during this string of bsods I had one while my windows was still starting up( where the windows loading happens)
My System SpecsSystem Spec
18 May 2013   #27
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

I have requested for more help on your thread.

Please wait for a reply.
My System SpecsSystem Spec
20 May 2013   #28
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Do some Disc checks.
  1. Reseat the sata and power.
  2. Run chkdsk /f/r, following the option two of the tutorial Disk Check
  3. Seatool for dos: SeaTools | Seagate download
    Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests", then select "Long Test" and let it run.
  4. Post screenshots of both your HDDs using CrystalDiskInfo - Software - Crystal Dew World
For a safety reason, Scan the system for possible virus infection with the following programs.
If BSODs continue to occur, post it following the Blue Screen of Death (BSOD) Posting Instructions. Only crash dumps are not enough for your situation.
My System SpecsSystem Spec
20 May 2013   #29
Vir Gnarus

Microsoft Community Contributor Award Recipient

Windows 7 64-bit
 
 

Don't forget to run Prime95 as well for a few hours.

Most of your crashdumps show bit flips in the CPU registers, as well as data corruption for some images in memory. If the disk checks don't show up anything, then I fear this is a Trio of Trouble issue, aka CPU/Mobo/PSU. There is no proper testing procedure outside of swapping hardware or using multimeter to test the PSU to reliably determine which of these three is the culprit. It's just a matter of crossing fingers and swapping one of them out and hoping it fixes things.
My System SpecsSystem Spec
20 May 2013   #30
thatsmywhitemam

California
 
 

I'll get back to guys once I've ran the tests. Thank you for your help guys.
My System SpecsSystem Spec
Reply

 BSOD After every startup. Works fine until the next day.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD GTX 260, works fine in safe mode.
Hi!! I have a BFG GTX 260 video card, when I turn it on in normal mode it displays BSOD but when I turn it on in safe mode it works fine, my motherboard (MSI K9N2 Diamond) has 3 PCI-Ex slots I tried all of them but it still crashes. I also uninstalled and installed the video drivers but no luck,...
BSOD Help and Support
BSOD on startup - but can run in safe mode fine
Hi all, About a week ago I started getting this BSOD on startup, happening at about the time consistently every time I boot Windows normally when the Windows login screen appears (if I login immediately, the BSOD happens right afterwards - sometimes the desktop can display in time; if I wait at...
BSOD Help and Support
BSOD on formatting 3TB HD connected with e-Sata / USB works fine
Got a new 3TB HD today which I use as external drive. When I connect it with USB it seems to work fine. Windows sees it and I can format it. When I conntect it with e-Sata, Windows says the Drive needs to be reformatted. As soon as I start a Quick format, Windows gives me an BSOD That's a...
BSOD Help and Support
BSOD upon logging into Windows 7, Safe Mode works fine.
I got a BSOD, and now upon logging into Win 7 I get a BSOD each time unless I go into Safe Mode which is working fine, I uploaded the dump file that I got from the program from this site. I did run Malwarebytes in QuickScan and no malware was found. Should I scan for a virus? My PC is... ...
BSOD Help and Support
BSOD Stop 50 (once 51) after logging in; Safe mode works fine
Hello. First of all, sorry about just registering and asking a question - I don't like it much, but I've been unable to solve this on my own, and I've run out of places to look for answers. Specs (Fujitsu Amilo Pi 3660): 2 years old OS: Windows 7 Home Premium x64 (last reinstalled about 6...
BSOD Help and Support
BSOD 4gb ram - Works fine with 2gb
4gb ram bsod on startup or a few minutes later. I tried every combination slots and sticks have no problems. (2 slots, 2x 2gb sticks) ---Additionally, in the little time i had on 4gb ram boot i saw that only 2,94 gb memory is usable. Is Windows 7 . . . - x86 (32-bit) or x64 ?
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:32.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App