Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD while classpnp.sys classpnp.old (Safe Mode)


30 Apr 2013   #11

Windows 7 Home
 
 

Reply Golden : My laptop is broken so I disassembled and sold some of the parts besides the hard drive thus I use my one and only desktop computer. All I want to do is recover all the data that is stored in the windows 7 partition of the hard drive. After that I would just reformat the hard drive using the ubuntu which I have to learn. However I will try MBR - Restore Windows 7 Master Boot Record and let you know the result.

My System SpecsSystem Spec
.

30 Apr 2013   #12

Windows 7 Home
 
 

I have succesfully done the "MBR - Restore Windows 7 Master Boot Record" method however the bsod still appears while booting windows 7
My System SpecsSystem Spec
01 May 2013   #13

Microsoft Community Contributor Award Recipient

Windows 7 Ult. x64 Windows 8.1 x64 Ubuntu 12.04 LTS Tri-Boot
 
 

It sounds to me like the disk got damaged when the laptop died???

Use a Live Ubuntu USB to copy the files you want off to another USB drive, and then install Windows 7 fresh - in the long run that is the least troublesome route.
My System SpecsSystem Spec
.


01 May 2013   #14
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Can you take a camera snap of the BSOD and upload it here?
My System SpecsSystem Spec
01 May 2013   #15

Windows 7 Home
 
 

Reply : Golden Ubuntu is already installed on the hard drive along with windows 7 and I could use it any time I want with out any problems. Also if ubuntu works perfectly then the hard drive isn't broken, am I right or wrong ? The problem is that the drive containing windows 7 along with my personal files doesn't show up on "my files" when I'm running ubuntu.

Also here is a picture of the bsod & disk and I apologize for the poor quality;
My System SpecsSystem Spec
02 May 2013   #16

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium x86 Service Pack 1 - Linux Mint Mate 14 x64
 
 

The screenshot looks like STOP 0x0000007B: INACCESSIBLE_BOOT_DEVICE, and I had a strong feeling it would be this exact BSOD too.

Code:
Usual causes:  Hard drive, File system, Boot sequence errors, Device driver, Virus infection (in particular check the MBR)
It seems GRUB has really damaged the Windows 7 boot files, have you tried using Startup Repair - Run 3 Separate Times, and then using Partition Wizard : Use the Bootable CD instead of the Disk Management since Windows 7 is currently not available?
My System SpecsSystem Spec
02 May 2013   #17
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Do you have access to another computer right now? If so, download Partition wizard Bootable CD (the last one in the link). Burn it in a blank CD or in a USB flash stick.

Boot into Partition Wizards GUI following this instructions. When you are on the last screen, take a camera snap of the screen and upload the snap here.
Screenshots and Files - Upload and Post in Seven Forums

We need to see the partitions and parameters.
My System SpecsSystem Spec
02 May 2013   #18

Windows 7 Home
 
 

How do you burn and what program do you use to burn the Partition wizard Bootable CD into a usb flash drive ?

x BlueRobot: No I haven't tried it.
My System SpecsSystem Spec
03 May 2013   #19

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium x86 Service Pack 1 - Linux Mint Mate 14 x64
 
 

You can use ImgBurn to burn the program to a CD, or use Windows 7 USB/DVD Download Tool[2]=General%20Tips to write the program to a bootable USB stick/drive, although I'm not sure if it will work with a USB stick.
My System SpecsSystem Spec
03 May 2013   #20
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Quote   Quote: Originally Posted by Acro View Post
How do you burn and what program do you use to burn the Partition wizard Bootable CD into a usb flash drive ?
If you want to make a bootable USB flash, use Universal USB Installer. Download the Partition Wizard ISO first. Then run UUI and follow it ....



For making a DVD, Use Imgburm as xBlueRobot suggested. You really dont know how to burn a disc?
My System SpecsSystem Spec
Reply

 BSOD while classpnp.sys classpnp.old (Safe Mode)




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:05 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33