Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: [BSOD] Clock interrupt

28 Apr 2013   #11
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Ok . When you cleaned INSTALLED it . Did you use the ISO file off the link that Gregrocker gave you ?

Here is a standalone SP1

Description Type Download
Service Pack 1 Stand Alonedownload



My System SpecsSystem Spec
.
29 Apr 2013   #12
Maesen

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by VistaKing View Post
Ok . When you cleaned INSTALLED it . Did you use the ISO file off the link that Gregrocker gave you ?

Here is a standalone SP1

Description Type Download
Service Pack 1 Stand Alonedownload
I did not use the ISO because the tutorial didnt say anything about it.

I will try installing this standalone SP1 when I get home later.

Thanks.
My System SpecsSystem Spec
29 Apr 2013   #13
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

Maesen it may help you if you read through this again.

Clean Reinstall - Factory OEM Windows 7

Trying to fix computers that don't have SP's installed can be very difficult.
My System SpecsSystem Spec
.

30 Apr 2013   #14
Maesen

Windows 7 Ultimate x64
 
 

Nope, still hangs at "Preparing to configure Windows". It's been 15 mins now.
My System SpecsSystem Spec
01 May 2013   #15
Maesen

Windows 7 Ultimate x64
 
 

So I looked ar the computer real fast this morning and it was still at the "Preparing to configure Windows" screen. I let it run over night, since last post.

That means it failed again and is stuck. Now i'll have to roll it back again to it's working state. What do I do now in order to install SP1? Without reinstalling Windows, if possible.

Thanks,
Maesen
My System SpecsSystem Spec
01 May 2013   #16
Maesen

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by Maesen View Post
So I looked ar the computer real fast this morning and it was still at the "Preparing to configure Windows" screen. I let it run over night, since last post.

That means it failed again and is stuck. Now i'll have to roll it back again to it's working state. What do I do now in order to install SP1? Without reinstalling Windows, if possible.

Thanks,
Maesen
Back from work. Still didnt get past it. Rebooted, went in safe mode to revert it. Back on desktop and first Blue Screen since manual update of a driver suggested. So Blue Screen issue isnt fixed, nor is my impossible to install SP1 trouble.
My System SpecsSystem Spec
01 May 2013   #17
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Run a Diagnostic on the hard drive . If the drive is good then I suggest doing a clean reinstall of windows . Meaning back up your data then format the hard drive and reinstall Windows . Use the tutorial that Gregrocker created and gave you the link to .
My System SpecsSystem Spec
Reply

 [BSOD] Clock interrupt




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD, a clock interrupt was not received
on a secondary interrupt. I had this problem before, but was solved with changing power settings. But since the last update of tuesday from Windows, the problem reoccurs. I tried to change the power settings, but the problem persists. Can anyone help. Thanks in advance
BSOD Help and Support
BSOD, a clock interrupt was not received
Getting random BSOD on my pc, I think its my processor but I am not 100% sure. Sometimes it happens when im gaming, but I have also had it happen when I just boot up and open 1 window in chrome. Also sometimes programs randomly just close and instead of getting a BSOD the computer will just shut...
BSOD Help and Support
BSOD : Clock Interrupt Not received/Driver_IRQL_Not_Less_or_Equal
Hello People. First off, I'm sorry if this is a potential duplicate post of someone else's thread. I looked through but got relatively confused. So i figured i would create an account and upload my data via the SF Diagnostic Tool. To state my problem: I built my computer about two years...
BSOD Help and Support
BSOD Under Stress - A Clock Interrupt was not recieved
Full BSOD: A clock interrupt was not received by a secondary processor within the allocated time interval. Hi, I just built a computer for the first time and it seems to be working fine except for this single BSOD I keep getting. At first I thought it happened just at random times until I...
BSOD Help and Support
Win 7 A Clock Interrupt... BSOD (101 Error)
I've been plagued by BSOD 101 errors (A clock interrupt was not received... blah blah) the last few days. Specs are attached in the report.zip and updated on my profile here. Also attaching the last few dump files. I've analyzed them myself but can't decipher exactly what the problem is. I have a...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:49.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App