BSOD ntoskrnl.exe 0x0000001e

Page 1 of 3 123 LastLast

  1. Posts : 14
    Windows 7 Professional 64bit
       #1

    BSOD ntoskrnl.exe 0x0000001e


    Hey,

    I need help with this, any help will help.


    Thanks,
      My Computer

  2.    #2

    Code:
    BugCheck 1E, {ffffffffc0000005, fffff800032b0e45, 0, ffffffffffffffff}
    
    Probably caused by : ntkrnlmp.exe ( nt!KeStackAttachProcess+115 )
    Code:
    Usual causes:  Device driver, hardware, System service, compatibility, Remote control programs, memory, BIOS
    The kernel has detected an illegal processor instruction, which couldn't be handled by the exception handler since no routines for the error exist.

    Code:
    0: kd> !error ffffffffc0000005
    Error code: (NTSTATUS) 0xc0000005 (3221225477) - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
    There seems to be some memory access violations, this is usually due to poorly written drivers referencing invalid addresses.

    >>Upload MSINFO32<<
    1. Start
    2. Type: msinfo32
    3. File, Save
    4. Place file in a zipped folder
    5. Upload in next post using - Screenshots and Files - Upload and Post in Seven Forums

    This file will show which programs you have installed, to see what drivers may be potentially causing issues.
      My Computer


  3. Posts : 14
    Windows 7 Professional 64bit
    Thread Starter
       #3

    System Info:

    Intel Core i3 CPU @2.27GHz
    RAM: 4GB
    64 - bit OS
      My Computer

  4.    #4

    I've posted, just in case you missed it.
      My Computer


  5. Posts : 14
    Windows 7 Professional 64bit
    Thread Starter
       #5

    Here you go.
      My Computer

  6.    #6

    Remove:

    Code:
    Start Menu\Programs\Driver Performer
    Windows 7 doesn't require these driver monitoring and automatic updating programs, which often install instable drivers which cause more problems, as well as, the malware which is often also bundled in. The best method to update drivers using the device's installation wizard (from manufacturer's website) or through Device Manager.

    Remove:

    Code:
    Start Menu\Programs\McAfee
    McAfee is known to cause BSODs in Windows 7, it's best to remove this program using the McAfee Removal Tool, and then install and run full scans with these proven alternatives which work with Windows 7.

    Install and perform full scans with:

       Information
    Remember to install the free version of Malwarebytes not the free trail; untick the free trial box during installation. MSE is the most lightweight and compatible with the Windows 7 operating system

    You can also view this thread for a complete free and lightweight security protection combination:
      My Computer


  7. Posts : 14
    Windows 7 Professional 64bit
    Thread Starter
       #7

    Did that and just got a BSOD. Here it is.
      My Computer

  8.    #8

    Code:
    BugCheck 1E, {ffffffffc0000005, fffffa8004fb4690, 0, 7fffffa8000}
    
    Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+487ed )
    What were the results of the requested scans?

    Run some hard-drive diagnostics and follow these steps:

    Find your hard-drive manufacturer and run their tests.

    Additional Tests:

    Post a screenshot of Crystal Disk Info summary:

    writhziden said:
    If you have an SSD, make sure the following are up to date:
    • SSD firmware
    • BIOS Version
    • Chipset Drivers
    • Hard disk controller drivers/SATA drivers
    • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.
    Check for any file system errors and bad sectors using Option #2 of:

    Use this command with Disk Check:

    Code:
    chkdsk C: /f /r
      My Computer


  9. Posts : 14
    Windows 7 Professional 64bit
    Thread Starter
       #9

    I think this is what you wanted??? I hope. And here is the BSOD Dump.


    thanks
      My Computer

  10.    #10

    For Crystal Disk Info, click on the Caution, and then move all the sliders to the left, then press Apply and then Exit.

    It's the same Stop 0x1E.

    What were the results of MSE and Malwarebytes?

    Have you completed any of the hard-drive scans?
      My Computer


 
Page 1 of 3 123 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 18:01.
Find Us