Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Various (seemingly unrelated) BSOD on new build. 0x0000003B

03 May 2013   #1

Windows 7 x64
 
 
Various (seemingly unrelated) BSOD on new build. 0x0000003B

Alright, I just built a new computer (not my first by any means) and this is the first time I've had any kind of trouble. On the first day of starting the machine up I was getting blue screens of all different errors (one of the most common was 3B) and they were all seemingly unrelated. Some errors said not enough disk space, which is impossible, I have plenty. Several involved the kernel, one even involved ntfs.sys. They all suggested a bios update though, so I flashed the bios and the problem went away for 2 days. Then this morning when I went to boot, I couldn't get the system to get much past the welcome screen before blue screening. Every time the error was different, except for 3 3Bs. I formatted the drive, reinstalled Windows 7 (lost the old dump files), and it is happening again.

So It would seem that it is time to RMA some parts, but I cannot pinpoint any truly suspect part.

What I have done so far:
Run a memory diagnostic tool, no errors.
Run chkdsk, no errors.
Updated all drivers to the latest, removed all software except windows and drivers.
Updated windows to the latest updates.
Used BlueScreenView to try and debunk some issues.
used SF Diagnostic Tool to provide the following file.

I am out of ideas on this, especially since I can be running a very intense game, and leave the computer running for days, and then have a random blue screen kill it. It seems that the blue screen is caused by windows update though, as that is the only problem that runs/installs anything new right around the time of the blue screens.

Any help would be greatly appreciated!

My System SpecsSystem Spec
.

03 May 2013   #2

Microsoft Community Contributor Award Recipient

Windows 7 enterprise 64 bit, Windows 7 Pro 64 bit ,Windows 8 64bit
 
 

It looks like your video card driver is causing problems:

Code:
fffff880`08796178  fffff880`111274f1Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
 nvlddmkm+0xbd4f1
Driver Reference Table - nvlddmkm.sys

looking at the time stamp on the driver we can see it is old:
Code:
kd> lmvm nvlddmkm
start             end                 module name
fffff880`1106a000 fffff880`11d52000   nvlddmkm T (no symbols)           
    Loaded symbol image file: nvlddmkm.sys
    Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp:        Thu Aug 30 11:50:16 2012 (503F8BB8)
    CheckSum:         00CCA304
    ImageSize:        00CE8000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please update it form here:Drivers - Download NVIDIA Drivers
My System SpecsSystem Spec
03 May 2013   #3

Windows 7 x64
 
 

The driver's I have are specific to the card, as it is designed to work with the Asus software, I have the latest driver from the Asus website, but I suppose at this point it can't hurt to try it.
My System SpecsSystem Spec
.


10 May 2013   #4

Windows 7 x64
 
 

Alright everything was fine for several days, and then all of a sudden this happened. I got a 1e error labeling tcpip.sys as the culprit. Here is the SFDT report.
My System SpecsSystem Spec
10 May 2013   #5

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

sharf224

Try updating the LAN driver for your Asus .

Have you tried running SFC /scannow ?
My System SpecsSystem Spec
10 May 2013   #6

Windows 7 x64
 
 

Updating the driver now - could have sworn that was up to date. SFC reported nothing wrong. I'll post back if anything goes wrong again. Thanks.

Edit: the driver listed on the website says it's from 10/31/12 but when I install it, device manager shows it as being 6/7/12...not sure what's up, but that's the same date I had before.
My System SpecsSystem Spec
10 May 2013   #7

Microsoft Community Contributor Award Recipient

Windows 7 enterprise 64 bit, Windows 7 Pro 64 bit ,Windows 8 64bit
 
 

You may need to update the driver for your USB mouse it was being blamed for the problem in your last dump file:

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

*** WARNING: Unable to verify timestamp for DB3G.sys
*** ERROR: Module load completed but symbols could not be loaded for DB3G.sys

Probably caused by : DB3G.sys ( DB3G+1ba3 )

Followup: MachineOwner
---------
Driver Reference Table - DB3G.sys

Please update the driver from here: Razer Diamondback Driver v6.02
My System SpecsSystem Spec
10 May 2013   #8

Windows 7 x64
 
 

Ok thanks, that's done. I would have thought when Windows update offered the drivers for it, they would be the latest. While I was at it I also tried updating my keyboard drivers (Saitek Cyborg V7) from their website, but it doesn't seem to change anything.

And about those lan drivers, I had to download the latest version from the realtek site, but now they're the newest.
My System SpecsSystem Spec
10 May 2013   #9

Microsoft Community Contributor Award Recipient

Windows 7 enterprise 64 bit, Windows 7 Pro 64 bit ,Windows 8 64bit
 
 

Never had to deal with a Saitek driver before, so I cant really speak to how well they provide support and update for their drivers, but let us know if you have further problems with your computer and we would be glad to help.
My System SpecsSystem Spec
10 May 2013   #10

Windows 7 x64
 
 

Well, this was it's longest streak without blue screening, and on the previous set up, I didn't install any drivers for the mouse I don't think. So I guess I'll just keep running it, and if I get another one, just try and fix them one at a time. Thanks!
My System SpecsSystem Spec
Reply

 Various (seemingly unrelated) BSOD on new build. 0x0000003B




Thread Tools



Similar help and support threads for2: Various (seemingly unrelated) BSOD on new build. 0x0000003B
Thread Forum
Solved BSOD at seemingly random intervals error 0x0000003B BSOD Help and Support
Constant BSOD on new custom build - Various Minidump Errors 0x0000003b BSOD Help and Support
what is unrelated connection if i launch utorrent Network & Sharing
BSOD seemingly unrelated to anything BSOD Help and Support
Solved BSOD 0x0000003B ntoskrnl.exe on NEW BUILD..please advise :) BSOD Help and Support
BSOD at random (unrelated) times BSOD Help and Support
Frequent Seemingly Unrelated BSODs BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:24 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33