Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD - often after the system has been running for 30-60 mins...

07 May 2013   #1
rgriffiths6

windows 7 64 bit
 
 
BSOD - often after the system has been running for 30-60 mins...

... Or after running media for a while. The system often starts to deteriorate, where the mouse will show jumps or stutters, or will start to drag slowly across the screen. This happens especially if a game or video is running, and when switching between browser windows or closing a window (any window, and regarding browsers there doesn't have to be any media in them). If I do not reboot when I notice this, the computer gets worse then blue screens.

I recently thought I solved the issue by reverting my GPU drivers to their current version and by updating the audio and wireless card drivers (I noticed when running DPC latency checker that each of these were causing drop outs) But then suddenly it blue screened again just now after a few days of running fine.

I can't shake the feeling that the GPU is the issue. It's a GTX 295 which I guess is a bit old now, and I am concerned that perhaps something in the drivers is just not interacting well with it. Problem is, running newer games on old drivers, even though the card is good, may also cause problems.


My System SpecsSystem Spec
.
07 May 2013   #2
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Update your jraid.sys

JMicron RAID Driver

Uninstall software
Code:
Start Menu\Programs\Defraggler
Start Menu\Programs\EnhanceMySe7en
My System SpecsSystem Spec
07 May 2013   #3
rgriffiths6

windows 7 64 bit
 
 

Thank you I removed those two programs. How do I know which JMicron driver to update to? I don't know what chip I have
My System SpecsSystem Spec
.

07 May 2013   #4
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Can I have the specs of your PC
My System SpecsSystem Spec
07 May 2013   #5
rgriffiths6

windows 7 64 bit
 
 

Sure:

Operating System
Microsoft Windows 7 Home Premium 64-bit SP1
CPU
Intel Core i7 920 @ 2.67GHz 57 C
Bloomfield 45nm Technology
RAM
6.00 GB Triple-Channel DDR3 @ 534MHz (8-8-8-20)
Motherboard
ASUSTeK Computer INC. P6T SE (LGA1366) 51 C
Graphics
W2486 (1920x1080@59Hz)
896MB GeForce GTX 295 (nVidia) 63 C
896MB GeForce GTX 295 (nVidia) 65 C
ForceWare version 311.06
SLI Enabled
Hard Drives
466GB Western Digital WDC WD5000AAKS-00V1A0 ATA Device (SATA) 49 C
1397GB Western Digital WDC WD1502FAEX-007BA0 ATA Device (SATA) 57 C
Optical Drives
Optiarc DVD RW AD-7240S ATA Device
Audio
High Definition Audio Device (Inbuilt on motherboard)
My System SpecsSystem Spec
07 May 2013   #6
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Here is the driver JMicron JMB36X

download

Added :

LAN Driver

download
My System SpecsSystem Spec
12 May 2013   #7
rgriffiths6

windows 7 64 bit
 
 

Hello,

Unfortunately it crashed again. I updated the jmicron driver. I cannot follow the link for that lan driver as it asks for login details?

I have attached the new crash logs

I noticed this morning when playing videos online that it kept stuttering and making a "grinding" sound. It's quite a harsh sound and the image was freezing when it happened/ It became more and more frequent but I switched it off before it blue screened.

After turning the computer on again and running a game (guild wars 2) it started playing up really badly. The sound and images were deteriorating. It happened faster than ever this time and eventually it completely crashed. While loading between areas the sound was particularly bad - like a grindy, distorted, crackling mess. The image started to slow and the mouse was dragging slowly across the screen. I ran dpc latency checker and all bars were red, but the computer then blue screened so I was unable to do anything else.
My System SpecsSystem Spec
Reply

 BSOD - often after the system has been running for 30-60 mins...




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
boot up fast, 1 mins, but take 30 mins before can use start do anythin
hello master2 of seven forums, here i have a problem, which is my pc can get very fast on boot to windows, around 60 sec or less, but the main problem is, i must wait around 30 minutes before i can do anything, like browsing, start winamp, etc. because when i clicked, the PC will be frozen. i...
General Discussion
Turn off display after 10 mins; lock desktop after 30 mins?
Is it possible to turn the displays off after 10 minutes of inactivity, but for the display to lock only after 30 minutes of inactivity? The numbers are examples, but probably close to what I'd set. I'm keen to save power, but having a short inactivity period, but I don't want to be entering my...
General Discussion
BSOD running system backup.
Getting a BSOD when trying to run a system backup. Seem to happen any time I try and access my secondary hard drive. I think the problem might be related to the secondary SATA, but obviously I can't solve it. I tried a different drive and got a BSOD coping files as well, so it doesn't seem...
BSOD Help and Support
10 mins running, then it turns off
Hello and thanks for your time. I'm from argentina so I hope you don't get mad because of my english and because of my ignorance in computers, I'll give my best try. So, like two months ago my computer started having crashes, first not so often but in the end I couldn't have it running for more...
BSOD Help and Support
system boots only after 10 mins even after formatting
i dont know man what has happened to my computer.it was ok but when i changed my os from vista to 7 the start up took 10 mins even if there are no programs installed.ive taken it to many pros but no one has the solution.it takes 10 mins to start up.gets stuck on the windows sign blinking and after...
Performance & Maintenance
loosing internet connection 3-5 mins after starting system.
Hi, About 3 to 5 minutes after starting my system I loose internet connection. I click on the wireless signal bar in the task tray and disconnect and reconnect to the internet and from then on it works fine! I'm using the linksys wusb600n wireless adapter and have the latest 64 bit drivers for...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:25.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App