crashes and freezes

Since 3 days I am having crashes and freezes in my WIN7 setup. The pc has been running problem free for about, 2 months. I did a fresh reinstall back than just to clean everything up, because my ssd was filling up.

When it crashes or freezes and I reset the pc, it first does not recognize my SSD anymore. Than I have to power it down, and start it again. After this procedure it reboots as it should.

The crashes don't seem to be related to anything specifically. This morning I have updated my graphics card already. Though I do suspect something with the internet drivers. However I have a dumpfile from DV so I have added it.

Hope to find a sollution soon, since my pc is practically useless in its current state.

Code:

BugCheck C9, {23e, fffff88004001308, fffff98005f16ee0, 0}

Unable to load image \SystemRoot\system32\DRIVERS\dtsoftbus01.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for dtsoftbus01.sys
*** ERROR: Module load completed but symbols could not be loaded for dtsoftbus01.sys
Probably caused by : dtsoftbus01.sys ( dtsoftbus01+1308 )

Driver Verifier has detected a I/O Verification error from a driver (see above), more specifically the first parameter highlighted in the blue text, indicates that the driver has marked a IRP packet pending, but didn't send a STATUS_PENDING response back to the call from the IoCallDriver routine.

Code:

1: kd> lmvm dtsoftbus01
start             end                 module name
fffff880`04000000 fffff880`04043000   dtsoftbus01 T (no symbols)           
    Loaded symbol image file: dtsoftbus01.sys
    Image path: \SystemRoot\system32\DRIVERS\dtsoftbus01.sys
    Image name: dtsoftbus01.sys
    Timestamp:        Thu Jan 13 08:15:01 2011 (4D2EB485)
    CheckSum:         00047BDA
    ImageSize:        00043000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

dtsoftbus01.sys is part of the Daemon Tools program, which in turn is a very well known cause for BSODs for Windows 7, please uninstall the program and driver completely using these steps:

Arc said:

Download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :

• Double click to open it.
• Click this button only:
• 
• If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.

x BlueRobot said:

Code:

BugCheck C9, {23e, fffff88004001308, fffff98005f16ee0, 0}

Unable to load image \SystemRoot\system32\DRIVERS\dtsoftbus01.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for dtsoftbus01.sys
*** ERROR: Module load completed but symbols could not be loaded for dtsoftbus01.sys
Probably caused by : dtsoftbus01.sys ( dtsoftbus01+1308 )

Driver Verifier has detected a I/O Verification error from a driver (see above), more specifically the first parameter highlighted in the blue text, indicates that the driver has marked a IRP packet pending, but didn't send a STATUS_PENDING response back to the call from the IoCallDriver routine.

Code:

1: kd> lmvm dtsoftbus01
start             end                 module name
fffff880`04000000 fffff880`04043000   dtsoftbus01 T (no symbols)           
    Loaded symbol image file: dtsoftbus01.sys
    Image path: \SystemRoot\system32\DRIVERS\dtsoftbus01.sys
    Image name: dtsoftbus01.sys
    Timestamp:        Thu Jan 13 08:15:01 2011 (4D2EB485)
    CheckSum:         00047BDA
    ImageSize:        00043000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

dtsoftbus01.sys is part of the Daemon Tools program, which in turn is a very well known cause for BSODs for Windows 7, please uninstall the program and driver completely using these steps:

Arc said:

Download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :

• Double click to open it.
• Click this button only:
• 
• If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.

Is this a reaction to my dumpfile or is this a reaction on someone else's problem?

I am very sorry. I must have misread. I actually read it was against the rules to create a whole new thread for a simmilar problem. I am very sorry for that.

I have uninstalled Daemon tools. Sadly enough the SPTD option was not installed at all, still I have removed DT totally, so let's see how things are going from here.

Have you disabled Driver Verifier?

Run this command in a Elevated Command Prompt to make sure:

Code:

verifier /query

If Driver Verifier has been successfully disabled, then it should say that no settings are being verified or something along those lines.

Yeah I have de-activated it correctly. I'm affraid I'm just going to reinstall my pc tomorrow and hope I'll never have this again.