BSOD in Win 7 ultimate x64 SP1


  1. Posts : 8
    Windows 7 Ultimate x64
       #1

    BSOD in Win 7 ultimate x64 SP1


    I have a big problem with BSOD, It happens any time and my laptop restarts again and again.
    I bought a new IBM/Lenovo G580 laptop, but I can't enjoy my new laptop.

    I attached the reports.

    Please help me.
      My Computer


  2. Posts : 6,830
    Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
       #2

    Update your Graphic Card. ( Intel )
      My Computer


  3. Posts : 181
    Windows 7
       #3

    STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
    Usual causes: Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS

    - First off, it is advised to remove these software as they are doing more bad than good at you laptop:
    Start Menu\Programs\Norton Utilities 16 Public:Start Menu\Programs\Norton Utilities 16 Public
    Start Menu\Programs\TuneUp Utilities 2013 Public:Start Menu\Programs\TuneUp Utilities 2013 Public
    Start Menu\Programs\TuneUp Utilities 2013\All functions Public:Start Menu\Programs\TuneUp Utilities 2013\All functions Public
    Use the AV Removal tools and Revo Uninstaller so that they won't leave any leftover

    Antivirus Removal Tools
    Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

    - Update these drivers as it is faulty:

    Code:
        Loaded symbol image file: igdkmd64.sys
        Image path: \SystemRoot\system32\DRIVERS\igdkmd64.sys
        Image name: igdkmd64.sys
        Timestamp:        Sat Feb 18 00:28:48 2012 (4F3E8E50)
    Intel Graphics driver -> Intel Driver Download Page

    - Run memtest86+, recommended to do at least 8 passes. Follow the instructions here:
    RAM - Test with Memtest86+

    - One of the windows components is causing error: netbt.sys
    To check the integrity of the system files:
    • Open elevated command prompt: Start > Run or press Windows + R key on keyboard
    • Type "cmd" (w/o quotes) then OK/Enter
    • type SFC /scannow then enter, post the results here


    - Also, do a chkdsk /f /r to check errors on the storage

    BSOD ANALYSIS
    Code:
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    Use !analyze -v to get detailed debugging information.
    
    BugCheck 50, {fffffa804b800528, 0, fffff8800f747180, 5}
    
    Unable to load image \SystemRoot\system32\DRIVERS\igdkmd64.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for igdkmd64.sys
    *** ERROR: Module load completed but symbols could not be loaded for igdkmd64.sys
    
    Could not read faulting driver name
    Probably caused by : igdkmd64.sys ( igdkmd64+12c180 )
    
    Followup: MachineOwner
    ---------
    
    2: kd> !analyze -v
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    PAGE_FAULT_IN_NONPAGED_AREA (50)
    Invalid system memory was referenced.  This cannot be protected by try-except,
    it must be protected by a Probe.  Typically the address is just plain bad or it
    is pointing at freed memory.
    Code:
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    Use !analyze -v to get detailed debugging information.
    
    BugCheck 50, {ffffba800edc1a9c, 0, fffff880030c48b3, 7}
    
    
    Could not read faulting driver name
    Probably caused by : netbt.sys ( netbt!NbtIPv4StringToAddress+47 )
    
    Followup: MachineOwner
    ---------
    
    2: kd> !analyze -v
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    PAGE_FAULT_IN_NONPAGED_AREA (50)
    Invalid system memory was referenced.  This cannot be protected by try-except,
    it must be protected by a Probe.  Typically the address is just plain bad or it
    is pointing at freed memory.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 02:10.
Find Us