Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Frequent BSOD, without pattern, 0x50, 0xa, 0x1a and many more


13 May 2013   #1
Minimalis91

Windows 7 Ultimate SP1 x64
 
 
Frequent BSOD, without pattern, 0x50, 0xa, 0x1a and many more

Hello,

Link to my previous thread: BSoD during gaming, 0xd1

I do not really know what to do. I am getting bluescreens every 2-3 hours now. I had a problem 2 weeks ago which was fixed by a driver reinstall. (I do not think this one is connected to that)
I want to do a clean Windows install, but I do not have anything to save my files to, so I'd rather see if this can be fixed without formating my hard drive.

I will run memtest, prime95, heaven and chkdsk starting now. Will post results.
Malwarebytes have not found any malware.

Error codes: 0x50, 0xa, 0x1000007e, 0x1a, 0x4e, 0x9c, 0x3b, 0x124
Caused by: Ntfs.sys, ntoskrnl.exe, usbaudio.sys, dump_dumpfve.sys, HWiNFO64A.sys, hal.dll, nvlddmkm.sys
Happening during: internet browsing, PC shutdown
Additional notes: Internet browsers are crashing frequently (Chrome and Firefox). Sometimes only shockwave is crashing on Chrome.

After my last BSOD (0x50, ntfs.sys) I seem to have lost some user settings:
Programs like Skype, ObjectDock reverted to default 'factory' settings.

Thanks for the help in advance. Any help is appreciated.


My System SpecsSystem Spec
13 May 2013   #2
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Hi minimalis91

Lets start with this to see what is going on with your PC .

Click here DDS

Click on Download Now button

Right-click the DDS icon choose Run as administrator to run the tool.

Place a check next to attact.txt and click Start . When done, DDS will open two logs
DDS.txt
Attach.txt

Save two logs onto your desktop and upload them with your reply
My System SpecsSystem Spec
13 May 2013   #3
Minimalis91

Windows 7 Ultimate SP1 x64
 
 

Thank you for the fast reply.
My System SpecsSystem Spec
13 May 2013   #4
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Have you scanned your PC for viruses ?

I see you have Daemon Tools Lite . Uninstall this program . Known to have issues on Windows 7

Once you're done removing the DTL software . Run the program below to remove the driver that is a BSOD causer . If you're not able to click on the Uninstall button go ahead and close the program by clicking the X on the upper right hand side. That comes with Daemon Tools Lite and Alcohol 120%

NAMEOSDOWNLOAD
SPTDWindows XP/2003/Vista/Windows 7 (64 bit)download
My System SpecsSystem Spec
14 May 2013   #5
Minimalis91

Windows 7 Ultimate SP1 x64
 
 

Quote:
Malwarebytes have not found any malware.
I've not had SPTD installed, someone told me not no install it as it causes BSODs. Anyways, I uninstalled DTL.

EDIT:
CHKSDK:
- yielded no errors

Prime95:
- SUMOUT error right after start on blender.
- Sometimes runs without errors
- yields error even on stock VCore and frequencies

Memtest:
- Lots of errors on first run in Dual Channel mode
- Module1(Single Channel): yields thousands of errors on first run
- Module2(Single Channel): I am currently testing. 1st run, 70% no errors yet.

So it is probably a faulty memory module. At least I hope it is only the memory and the CPU is not involved.
My System SpecsSystem Spec
14 May 2013   #6
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

If you have a Dual Channel memory kit and one RAM stick is bad replace both ram sticks even if the other one is good. Purchase a new DC kit. If the memory sticks are still under warranty call the manufacture of the memory sticks and open up an RMA .
My System SpecsSystem Spec
14 May 2013   #7
Minimalis91

Windows 7 Ultimate SP1 x64
 
 

I've already replaced them at the local retail shop. Memtest did not yield any errors when testing them in single and dual channel. I am currently testing if I get any bluescreen errors. Will post if I do or mark it as solved if I do not.

Back on the DTL topic: Is it okay to install DTL without SPTD (I've been using it that way for quite some time now) or should I use another software? If I should use another one, what would be your recommendation? What about PowerISO?

Thanks for your help. I appreciate it.
My System SpecsSystem Spec
14 May 2013   #8
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

You may use PowerISO it doesn't need the STPD driver .
My System SpecsSystem Spec
Reply

 Frequent BSOD, without pattern, 0x50, 0xa, 0x1a and many more




Thread Tools



Similar help and support threads for2: Frequent BSOD, without pattern, 0x50, 0xa, 0x1a and many more
Thread Forum
BSOD getting more frequent... no apparent pattern to when it happens. BSOD Help and Support
Getting random BSODs @ 0x1A, 0x50 BSOD Help and Support
Ongoing frequent BSOD, error 0x0000001E (no pattern as to when) BSOD Help and Support
Frequent BSOD "Driver Power State Failure," No pattern that I see BSOD Help and Support
0x0a & 0x1a BSODs. Frequent and Frustrating to Fix BSOD Help and Support
BSOD at "random": 0x1a, 0x50, 0x3b ntoskrnl.exe+7cc80 BSOD Help and Support
Solved Frequent BSOD's, can't find a clear pattern. dump attached BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:26 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App