Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD Winxp 64bit, Win7 Pro 64bit many error codes

14 May 2013   #1

Windows 7 Pro 64bit
BSOD Winxp 64bit, Win7 Pro 64bit many error codes

Hi every one,

i have this machine which is causing too much headache for me,

this machine was having Windows XP 64 Bit,
and it had a lot of BSOD crashes, then i just decided that it's the time to make the move to Windows 7 for this high performance machine, since i was not able to upgrade to Windows 7 because of some applications just working on Windows XP 64 Bit, but now there is a copy of it,

Any way i'm still having those BSOD crashes,
I have replaced the SSD 500GB hard drive with another regular hard drive with no results,
tried to remove and install nVidia Driver,
tried to install a different version of that driver with no results,
tried to remove McAfee AV and installed Kaspersky Internet security 2013 also no result,

now i have grabbed all the data using SF Tool, and i really hope that u can help me with that issue.

thank you

My System SpecsSystem Spec
14 May 2013   #2

Windows 7

- you have Bugcheck 116: VIDEO_TDR_ERROR
you may want to read this first STOP 0x116: VIDEO_TDR_ERROR troubleshooting

BugCheck 116, {fffffa800acaf010, fffff8800592c134, ffffffffc000009a, 4}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+8e4134 )
You can either try updating your NVIDIA drivers, or roll back to the most stable release (preferably WHQL'd)

- Uninstall your KIS 2013 as it's causing BSOD
BugCheck 3B, {c0000005, fffff88003594fa9, fffff88004409740, 0}

Probably caused by : klif.sys ( klif+95fa9 )

Followup: MachineOwner
klif.sys - Driver Reference Table
you can use the tools here Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase

fffff880`038cba08  fffff880`04546802Unable to load image \SystemRoot\system32\DRIVERS\klim6.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for klim6.sys
*** ERROR: Module load completed but symbols could not be loaded for klim6.sys
This is part of KIS 2013, and apparently messing with your TCP/IP connections, which is in conjuction to:
fffff880`038cb9d8  fffff880`05b4784fUnable to load image \SystemRoot\system32\DRIVERS\yk62x64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for yk62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for yk62x64.sys
Marvell Yukon networking
after uninstalling KIS, update that driver Marvell - Support

- I see your MSINFO file is empty. can you reattach it again?

- If you overclock, return to your original settings
Overclock can cause many case of hardware problem from overheating and such
CPUID:        "Intel(R) Core(TM) i7 CPU         975  @ 3.33GHz"
MaxSpeed:     3330
CurrentSpeed: 3450
My System SpecsSystem Spec
16 May 2013   #3

Windows 7 Pro 64bit

Dear cipley,

Please notice that most of the issues dated on 14/may caused by driver verifier which i turned on for testing
and regarding kaspersky this AV i installed instead of stupid Mcafee one week ago, and it doesn't seems making any troubles but the BSOD i'v got because of it i think it's because of the Verifier that was turned on,
Any way i'v did the rest of steps you advised, i'v checked my NVIDIA drived it's the latest WHQL driver,
And bios overclocking settings to be auto instead of 1800 MHZ and i did a memory check on memory test x86

but still getting BSOD but now for another reasons as in "Who Crashed" Report, The new report is attached.

I'm really confused about that, Replaced (windows, hard drive, AV, Display adapter driver) what do i have to replace also to make this PC work, i'm really confused about this situation and my manager is mad of this matter

i'll be really thankful if you figured out the issue, this is a high performance machine and should not go through this issues because it's the most important machine in the office.

and thank you again for your time
My System SpecsSystem Spec

17 May 2013   #4

Windows 7 Pro 64bit

any one?
My System SpecsSystem Spec

 BSOD Winxp 64bit, Win7 Pro 64bit many error codes

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
how transfer data from win7 64bit to win xp 64bit?
how transfer data from win7 64bit to win xp 64bit? I searched on google but not found anything, no software. I also tried WET 7xp-64bit but not working.
Network & Sharing
Frequent BSOD Kernel Input Data Error 0x07a on Win7 64bit ptBR
I'm getting this system error when my computer does multiple things or runs specific aplications. I used to have Win7 for years straight flawless since these errors started to happen about 3 weeks ago. Differently from others users from this forum experiencing same error as mine I don't get this...
BSOD Help and Support
Software migration from WinXP 32bit to Win7 64bit
I've made my decision, I'm going to stick with Windows 7 Professional. The problem is that I have lots of 32bit programs that I need to migrate( along with their settings) to their 64bit version. Is it possible to use settings/profiles from the 32bit version to the 64bit version? Where do...
General Discussion
printer sharing win7 home 64bit to winxp pro laptop
I cannot get my desktop which is running win 7 home 64bit to connect to my laptop which is running win xp pro sp3. i set the workgroup to home on both machines and still nothing. My laptop will not see the desktop over the network. Any ideas on what i should do?
Network & Sharing
Win7 (32bit) to Win7 (64bit) upgrade install error
Hello I have purchased and downloaded both 32 bit and 64 bit Windows7 Professional (no CDs or media here only download version) I sucessfully upgraded from Vista 32 to Win7 32 Then I upgraded my hard disk (140Gb 500GB) and RAM (3GB to to 4GB) Now I would like to go from Win7 32bit...
Installation & Setup
64bit Install? Dual boot with winxp?
Existing: Dual Boot Windows 7 RC Beta partition 1 Windows XP 32 partition 2 Can have Windows 7 64 bit on partition 1 and WinXP 32 bit on partition 2 for dual boot? Is it worth the trouble/issues etc to run windows 7 64 bit?
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:54.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App