Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Unexpected Shutdown DRIVER_POWER_STATE_FAILURE 0x0000009f


20 May 2013   #1

Windows 7 Home Premium 64bit
 
 
Unexpected Shutdown DRIVER_POWER_STATE_FAILURE 0x0000009f

New system Windows 7 x64. swapped out the Asus Z77 motherboard with an Intel DH77EB board BIOS 0100, reinstalled windows clean, all current Intel drivers RST 12.5.0.1066. Intel 335 SSD. Same thing, shuts down when in sleep mode.

051513-6193-01.dmp 5/15/2013 11:26:00 PM DRIVER_POWER_STATE_FAILURE 0x0000009f 00000000`00000003 fffffa80`070c2a10 fffff800`04bef3d8 fffffa80`06c05010 ntoskrnl.exe ntoskrnl.exe+75c00 x64 ntoskrnl.exe+75c00

I just tried the RST 12.6.0.1033 and the computer will not sleep at all. I had to uninstall the SSD Toolbox because it doesn't seem compatible with the 12.6 RST drivers.

At this point, no Intel RST installed and PC is sleeping, will wait for Unexpected Shutdown?, ran the SF Diagnostic tool with no RST installed.


My System SpecsSystem Spec
.

20 May 2013   #2
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

The issue is sleep/hibernate related. As yours a desktop PC, hibernation is not any must there. Disable it following Hibernate - Enable or Disable

The BSOD is caused by intel RST drivers.
Code:
Irp is active with 4 stacks 3 is current (= 0xfffffa8006c05170)
 No Mdl: No System Buffer: Thread 00000000:  Irp stack trace.  
     cmd  flg cl Device   File     Completion-Context
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

            Args: 00000000 00000000 00000000 00000000
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

            Args: 00000000 00000000 00000000 00000000
>[ 16, 2]   0 e1 fffffa80070dc060 00000000 00000000-00000000    pending
          *** WARNING: Unable to verify timestamp for iaStorA.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys
 \Driver\iaStorA
            Args: 00015400 00000001 00000004 00000003
Lately the RST drivers are facing stability issue. I would suggest you to uninstall RST. Get rid of intel rapid storage. First uninstall it from Control Panel > Programs and Features. Then Uninstall the driver from device manager.
  1. Right click on "my computer" icon and click "manage" on the context menu.
  2. It will open the "computer management" window.
  3. Select "Device Manager" in the left pane, It will list all the existing devices up.
  4. Expand "IDE ATA/ATAPI controllers" by clicking on the triangle in front of it.
  5. Select one Intel device item under it, right click, uninstall.
  6. Continue the process for all Intel items under "IDE ATA/ATAPI controllers"
  7. Now restart the computer. At restart, windows will auto configure the appropriate native system driver.
If you are using RAID in BIOS, disable it.

For an extra caution, scan the system for possible virus infection with the following programs.
Also make it sure that your intel INTEL SSDSC2CT180A4 is running with the latest firmware.
Intel® High Performance Solid-State Drive — Update your Intel® SSD Firmware using the Intel® Solid-State Drive Toolbox

Let us know the results.
______________________________________________________________________________
BSOD ANALYSIS:
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa80070c4060, fffff80004bdc3d8, fffffa800c3e9240}

Probably caused by : pci.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa80070c4060, Physical Device Object of the stack
Arg3: fffff80004bdc3d8, nt!TRIAGE_9F_POWER on Windows 7, otherwise the Functional Device Object of the stack
Arg4: fffffa800c3e9240, The blocked IRP

Debugging Details:
------------------


DRVPOWERSTATE_SUBCODE:  3

IMAGE_NAME:  pci.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4ce7928f

MODULE_NAME: pci

FAULTING_MODULE: fffff88001189000 pci

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

BUGCHECK_STR:  0x9F

PROCESS_NAME:  System

CURRENT_IRQL:  2

TAG_NOT_DEFINED_c000000f:  FFFFF80004BE2FB0

STACK_TEXT:  
fffff800`04bdc388 fffff800`035338c2 : 00000000`0000009f 00000000`00000003 fffffa80`070c4060 fffff800`04bdc3d8 : nt!KeBugCheckEx
fffff800`04bdc390 fffff800`034ce84c : fffff800`04bdc4c0 fffff800`04bdc4c0 00000000`00000000 00000000`00000001 : nt! ?? ::FNODOBFM::`string'+0x33af0
fffff800`04bdc430 fffff800`034ce6e6 : fffff800`03673f20 00000000`001fa9f2 00000000`00000000 00000000`00000000 : nt!KiProcessTimerDpcTable+0x6c
fffff800`04bdc4a0 fffff800`034ce5ce : 0000004b`5f484d9b fffff800`04bdcb18 00000000`001fa9f2 fffff800`036430c8 : nt!KiProcessExpiredTimerList+0xc6
fffff800`04bdcaf0 fffff800`034ce3b7 : 00000019`06befac1 00000019`001fa9f2 00000019`06befa10 00000000`000000f2 : nt!KiTimerExpiration+0x1be
fffff800`04bdcb90 fffff800`034bb90a : fffff800`0363ee80 fffff800`0364ccc0 00000000`00000001 fffff800`00000000 : nt!KiRetireDpcList+0x277
fffff800`04bdcc40 00000000`00000000 : fffff800`04bdd000 fffff800`04bd7000 fffff800`04bdcc00 00000000`00000000 : nt!KiIdleLoop+0x5a


STACK_COMMAND:  kb

FOLLOWUP_NAME:  MachineOwner

FAILURE_BUCKET_ID:  X64_0x9F_3_iaStorA_IMAGE_pci.sys

BUCKET_ID:  X64_0x9F_3_iaStorA_IMAGE_pci.sys

Followup: MachineOwner
---------
My System SpecsSystem Spec
20 May 2013   #3

Windows 7 Home Premium 64bit
 
 

Last night I uninstalled the RST drivers, rebooted and left the PC in Sleep mode all night, no shutdown, no problem.

Under IDE ATA/ATAPI Controllers I have:
ATA Channel 1-5 - Driver: 6.1.7601.17514 02/25/2006
Intel Series 7/C216Chipset Family SATA AHCI Contorller 1E02 - Driver: 9.3.0.1027 2/25/2013

This was from the Intel Chipset Drivers?

With the 12.6.0.1066 RST PC will not sleep.

With 12.5.0.1066 I get the Unexpected Shutdown BSOD, It does take time for the error, overnight is a good test.

I have not disabled Hibernation yet, I may try that with both the 12.5 and 12.6 RST drivers. I really just wanted to confirm it is something with the RST drivers first.

Thanks again!
My System SpecsSystem Spec
.


20 May 2013   #4
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

If you want to experiment, you are most welcome. It will give you a better insight to the drivers you use.

But what we have experienced that other than the version released on 6th July 2012, all the latest RST drivers are suffering from stability issue. Dont know why, but lately intel revoked that aforesaid driver from their site. So we are suggesting to uninstall RST, as per our debugging experience. If you can add any new knowledge, it will be highly appreciated.

TBH, as per the data you uploaded the last time, though RST was the failing module, but the AHCI driver in use was the system native msahci.sys, not iastor.sys.
Code:
Name    Intel(R) 7 Series/C216 Chipset Family SATA AHCI Controller - 1E02
Driver    c:\windows\system32\drivers\msahci.sys (6.1.7601.17514, 30.38 KB (31,104 bytes), 11/20/2010 7:23 PM)
In that situation, the good thing that might be tested is to disable RAID, IMO.

Let us know your findings.
My System SpecsSystem Spec
20 May 2013   #5

Windows 7 Home Premium 64bit
 
 

RST was not installed when I ran the SF Diagnostic tool originally. Should I install them and run the SF Diagnostic Utility again?

Do you know the exact version of the RST drivers released on 6th July 2012? I may have those to try.

Thanks again
My System SpecsSystem Spec
20 May 2013   #6
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

It is 11.2.0.1006, but it is no longer there in intel's download page.

If you use the generic msahci.sys, you will not loss anything but will gain stability only. Any version of RST may fail, but msahci.sys never fails.
My System SpecsSystem Spec
20 May 2013   #7

Windows 7 Home Premium 64bit
 
 

Update: Disabled Hibernation, installed RST 12.5.0.1066 just to test.

Strange how my other PC never had the Hibernate option. What enables this on install?
My System SpecsSystem Spec
20 May 2013   #8
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Quote   Quote: Originally Posted by mrboonmee View Post
Update: Disabled Hibernation, installed RST 12.5.0.1066 just to test.
Best of luck.
Let us know how it runs.
My System SpecsSystem Spec
22 May 2013   #9

Windows 7 Home Premium 64bit
 
 

I haven't had any issues since I disabled hibernation. I will wait a couple more days before I close this, but looks solved.

Why does this enable on some systems and not on others?

Thanks again
My System SpecsSystem Spec
23 May 2013   #10
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Probably that is enabled by default. We disable it manually, when we need to disable it.
My System SpecsSystem Spec
Reply

 Unexpected Shutdown DRIVER_POWER_STATE_FAILURE 0x0000009f




Thread Tools



Similar help and support threads for2: Unexpected Shutdown DRIVER_POWER_STATE_FAILURE 0x0000009f
Thread Forum
BSOD Driver_Power_State_Failure 0x0000009F BSOD Help and Support
BSOD 0x0000009f, ntoskrnl.exe, DRIVER_POWER_STATE_FAILURE BSOD Help and Support
BSOD error 0x0000009f Driver_Power_State_Failure Graphic Cards
Often occurring 0x0000009f DRIVER_POWER_STATE_FAILURE BSOD Help and Support
Pc left for while resuting 0x0000009f DRIVER_POWER_STATE_FAILURE BSOD Help and Support
DRIVER_POWER_STATE_FAILURE 0x0000009f (While Playing GTA-IV) BSOD Help and Support
DRIVER_POWER_STATE_FAILURE 0x0000009f BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 05:57 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33