Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD randomly - Continues after Reformatting

24 May 2013   #1

Windows 7 64 Bit
 
 
BSOD randomly - Continues after Reformatting

Hey, I dont really know much about bluescreens but this has been annoying me. I reformatted my computer and everything, still happening. Please help I included the bsod error thing as a attachment. Thanks!


My System SpecsSystem Spec
.

24 May 2013   #2

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Hi SketchsHome.

This is the output of your dump:
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 7A, {20, ffffffffc000009d, fffffa800838f078, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4c830 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in.  Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: 0000000000000020, lock type that was held (value 1,2,3, or PTE address)
Arg2: ffffffffc000009d, error status (normally i/o status code)
Arg3: fffffa800838f078, current process (virtual address for lock type 3, or PTE)
Arg4: 0000000000000000, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)

Debugging Details:
------------------


ERROR_CODE: (NTSTATUS) 0xc000009d - STATUS_DEVICE_NOT_CONNECTED

DISK_HARDWARE_ERROR: There was error with disk hardware

BUGCHECK_STR:  0x7a_c000009d

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

PROCESS_NAME:  System

CURRENT_IRQL:  1

LAST_CONTROL_TRANSFER:  from fffff80002af9bec to fffff80002ac1f00

STACK_TEXT:  
fffff880`03308828 fffff800`02af9bec : 00000000`0000007a 00000000`00000020 ffffffff`c000009d fffffa80`0838f078 : nt!KeBugCheckEx
fffff880`03308830 fffff800`02aabe67 : fffffa80`0838f010 00000000`c000009d 00000000`00000000 fffffa80`0838f0a8 : nt! ?? ::FNODOBFM::`string'+0x4c830
fffff880`033088f0 fffff800`02a9e92f : fffffa80`06cf4040 fffffa80`06cf4090 00000000`00000000 00000000`00000000 : nt!IopCompletePageWrite+0x57
fffff880`03308920 fffff800`02ac925d : fffffa80`06cf4040 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDeliverApc+0x1d7
fffff880`033089a0 fffff800`02ac554b : 00000103`08371001 00000000`00000000 00000000`00000000 fffff880`03308a50 : nt!KiCommitThreadWait+0x3dd
fffff880`03308a30 fffff800`02a5aa8f : fffffa80`00000002 fffff880`03308d20 00000000`00000001 fffffa80`00000013 : nt!KeWaitForMultipleObjects+0x271
fffff880`03308ce0 fffff800`02d65166 : fffffa80`06cf4040 ffe477e8`ffffe814 00000000`00000080 00000000`00000001 : nt!MiModifiedPageWriter+0xcf
fffff880`03308d40 fffff800`02aa0486 : fffff880`02f64180 fffffa80`06cf4040 fffff880`02f6efc0 873ee8cd`8b48087e : nt!PspSystemThreadStartup+0x5a
fffff880`03308d80 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nt! ?? ::FNODOBFM::`string'+4c830
fffff800`02af9bec cc              int     3

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt! ?? ::FNODOBFM::`string'+4c830

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  4a5bc600

FAILURE_BUCKET_ID:  X64_0x7a_c000009d_nt!_??_::FNODOBFM::_string_+4c830

BUCKET_ID:  X64_0x7a_c000009d_nt!_??_::FNODOBFM::_string_+4c830

Followup: MachineOwner
---------
Code:
DISK_HARDWARE_ERROR: There was error with disk hardware
STOP 0x0000007A: KERNEL_DATA_INPAGE_ERROR
Usual causes: Memory, Paging file corruption, File system, Hard drive, Cabling, Virus infection, Improperly seated cards, BIOS, Bad motherboard, Missing Service Pack.

Virus check
Scan your system with the following:

Kaspersky TDSSKiller - How to remove malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon)

ESET online scanner - One-time virus scanner free with ESET online scanner

As well as Windows Defender Offline: How to Use Windows Defender Offline

Hard Drive/Storage

Post a screen shot using Crystal Disk Info: CrystalDiskInfo Standard Edition

How to Upload and Post a Screenshot and File in Seven Forums

Make a hard drive test from the hard drive manufacturers website: Hard Drive Diagnostic Procedure

Basic checks:
Please run these tests and report back the results

1. SFC /scannow to check windows for corruption - SFC /SCANNOW Command - System File Checker
2. Disk check for errors on the hard drive - How to Run Disk Check in Windows 7
3. Troubleshoot applications by a clean boot - Troubleshoot Application Conflicts by Performing a Clean Startup
4. Memtest86+ paying close attention to part 3 - RAM - Test with Memtest86+
5. Hard drive test from HDD mfg website - Hard Drive Diagnostic Procedure
My System SpecsSystem Spec
25 May 2013   #3

Windows 7 64 Bit
 
 

Thank you, it was a problem with my ram! Thanks
My System SpecsSystem Spec
.


25 May 2013   #4

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Tip   Tip

If your problem is solved please use the Mark this thread as solved link at the top of your thread or down on the left corner


Post back if they reoccur
My System SpecsSystem Spec
Reply

 BSOD randomly - Continues after Reformatting




Thread Tools



Similar help and support threads for2: BSOD randomly - Continues after Reformatting
Thread Forum
BSOD even after reformatting computer. BSOD Help and Support
Solved BSOD after reformatting my PC BSOD Help and Support
BSOD Before And After Reformatting Computer BSOD Help and Support
BSOD 0x00000000A Error. Continues Occuring BSOD Help and Support
BSOD After reformatting . BSOD Help and Support
BSOD continues after Reinstalls. BSOD Help and Support
BSOD after reformatting BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:37 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33