Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD BAD_POOL_HEADER and other errors

29 May 2013   #11
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by thefatshizms View Post
I played far cry 3 for around 40 minutes, no BSOD and still none. When going on photoshop cs6 (trial version) it freezes but I'm sure that's due to a faulty photoshop. Do you have any ideas of what I can do to use the computer at maximum load?
Computers have their limitation. Photoshop CS6 is a big and resource program (much heavier than CS5). If you open it while running another heavy program, the computer may not respond properly. Use a bigger HDD, replace the antivirus with MSE, those may increase the tolerance ability of the PC. And dont keep any startup entry other than the antivirus.


My System SpecsSystem Spec
.
29 May 2013   #12
thefatshizms

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by Arc View Post
Quote   Quote: Originally Posted by thefatshizms View Post
I played far cry 3 for around 40 minutes, no BSOD and still none. When going on photoshop cs6 (trial version) it freezes but I'm sure that's due to a faulty photoshop. Do you have any ideas of what I can do to use the computer at maximum load?
Computers have their limitation. Photoshop CS6 is a big and resource program (much heavier than CS5). If you open it while running another heavy program, the computer may not respond properly. Use a bigger HDD, replace the antivirus with MSE, those may increase the tolerance ability of the PC. And dont keep any startup entry other than the antivirus.
I've done that I re enabled DV checking every driver on the list apart from unkown and microsoft and I crash before loading windows.. Again.
My System SpecsSystem Spec
29 May 2013   #13
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

How many startup entries are there?
My System SpecsSystem Spec
.

29 May 2013   #14
thefatshizms

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by Arc View Post
How many startup entries are there?
Only the antivirus
My System SpecsSystem Spec
29 May 2013   #15
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Disable DV and Re-enable it following the instructions again?
My System SpecsSystem Spec
29 May 2013   #16
thefatshizms

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by Arc View Post
Disable DV and Re-enable it following the instructions again?
Just did that, I then did load to desktop but within a few mins I would ethier freeze or bluescreen.. Now running the windows 7 forum diagnostics tool and the upload it when its done
My System SpecsSystem Spec
29 May 2013   #17
thefatshizms

Windows 7 Ultimate x64
 
 

I've uploaded the the folder in the attachment
My System SpecsSystem Spec
29 May 2013   #18
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Better late than never

Well, it is caused by WinCDEmu Virtual Bus by SysProgs.org.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C9, {215, fffff88003e9d7cb, fffff98009a90e10, 0}

*** WARNING: Unable to verify timestamp for BazisVirtualCDBus.sys
*** ERROR: Module load completed but symbols could not be loaded for BazisVirtualCDBus.sys
Probably caused by : BazisVirtualCDBus.sys ( BazisVirtualCDBus+137cb )

Followup: MachineOwner
---------
A single of such programs those put SCSI to the system are troublesome, whereas you have two of them installed. WinCDEmu Virtual Bus and MagicISO SCSI Host Controller.

I would suggest you to uninstall the both. WinCDEmu and Magic Disc.

After removing those, the system will be a bit of stable, and easier for further troubleshooting, if needed.

Disable DV, Uninstall them, and let us know the situation.
My System SpecsSystem Spec
29 May 2013   #19
thefatshizms

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by Arc View Post
Better late than never

Well, it is caused by WinCDEmu Virtual Bus by SysProgs.org.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C9, {215, fffff88003e9d7cb, fffff98009a90e10, 0}

*** WARNING: Unable to verify timestamp for BazisVirtualCDBus.sys
*** ERROR: Module load completed but symbols could not be loaded for BazisVirtualCDBus.sys
Probably caused by : BazisVirtualCDBus.sys ( BazisVirtualCDBus+137cb )

Followup: MachineOwner
---------
A single of such programs those put SCSI to the system are troublesome, whereas you have two of them installed. WinCDEmu Virtual Bus and MagicISO SCSI Host Controller.

I would suggest you to uninstall the both. WinCDEmu and Magic Disc.

After removing those, the system will be a bit of stable, and easier for further troubleshooting, if needed.

Disable DV, Uninstall them, and let us know the situation.
Okay thanks. I originally installed them (well, a friend did) because I was having this issue and was trying to mount a backup point or something? Anyway, uninstalling them now.
My System SpecsSystem Spec
29 May 2013   #20
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Those programs are not any good to use.

It is hardware virtualization, created by software. OS boots in hardware environment and then creates the software environment. Can you guess where the logic breaks? How the OS can virtualize hardware successfully before it boots? So the hardware environment breaks.
My System SpecsSystem Spec
Reply

 BSOD BAD_POOL_HEADER and other errors




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Bad_pool_header
I just got a Bad Pool Header BSOD. I was able to restart fine. Unfortunately, i had a lot of programs running so i imagine it could be any number of things. I've upploaded the log from your software as well as logs from bluescreenviewer. Bluescreenviewer had two files highlighted - ntoskrnl.exe...
BSOD Help and Support
Bsod bad_pool_header
Computer type PC/Desktop Computer Manufacturer/Model Number HP Pavilon p7-1110 OS windows 7 home premium 64bit CPU intel i3 2120 Motherboard PEGATRON corporation 2AC2
BSOD Help and Support
BSOD Bad_Pool_Header
Im using Windows 7 Home premium 64bit OEM original installed OS Purchased it all from Cyberpower Inc. about 2 months ago Thanks
BSOD Help and Support
BSOD: BAD_POOL_HEADER
Long story short, I left computer on and went for a nap; came back and saw BSOD with BAD_POOL_HEADER error?! Can someone please kindly help me ID what was causing it? Attached complete logs below and thanks in advance for the help. CPU: P4 3.06 Video: ATI HD3850 agp 2GB memory OS: Windows...
BSOD Help and Support
BSoD - BAD_POOL_HEADER
I'm using Lenovo Thinkpad X201i (Core i3-350, 2.26GHz) with DDR3/4GB, HDD 320/7200RPM. The hardware is about 6 months old. Firstly I installed Win7/32-bit and found BSoD stated BAD_POOL_HEADER and Windows cannot be launched but restart itself for many times. Then I've changed to Win7/64bit...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:06.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App