Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD with error code 0x00000001E

05 Jun 2013   #1
xironet

7 Ultimate
 
 
BSOD with error code 0x00000001E

I have a system made it by myself with motherboard GA-945GCM-S2L with BIOS ver. F7.
Recently upgraded to a legal version of Windows 7. I do get intermittent BSOD crash with error code 1E.
Before, I was running XP Pro, and had 2G RAM running @ 667 MHz. When I decided to upgrade my OS, I changed my RAM to 4G which run @ 800MHz. To make sure that the system benefits from a higher frequency for the RAM, I changed the multiplier in the BIOS and hence my CPU clock speed changed from 2.2GHz to 3GHz.

I understand that 1E error refers to a clash between drivers and memory and personally I don't think it has anything to do with over clocking as the system has been designed for over clocking. I need to find out which driver is causing the problem. By the way, I have got SP1 installed as well and have updated Windows fully.
I have attached SF file as well as all the dump files and I am hoping that someone can analyse this files and tell me what to do. Also my IE8 keeps crashing and recovering, and a system like this which should be very fast is indeed extremely slow. I have check the Windows performance and have noticed that CPU and RAM running at full. Any advice will be very much appreciated. (exlorer does not open in order to attach my files. I try to do that from a different system later on)

Thanks

Regards,

Hamid


My System SpecsSystem Spec
.
05 Jun 2013   #2
x BlueRobot

 

My System SpecsSystem Spec
05 Jun 2013   #3
xironet

7 Ultimate
 
 
Error Code 1E - systems files uploaded

Hi ,

I managed to upload my dump files and the SF files. Please take a look and comment.

Thanks
My System SpecsSystem Spec
.

06 Jun 2013   #4
x BlueRobot

 

Code:
BugCheck 3B, {c0000420, fffff80002abc264, fffff8800435eb40, 0}

*** WARNING: Unable to verify timestamp for eamonm.sys
*** ERROR: Module load completed but symbols could not be loaded for eamonm.sys
Probably caused by : eamonm.sys ( eamonm+9172 )
Code:
Usual causes:  System service, Device driver, graphics driver, memory
Code:
0: kd> lmvm eamonm
start             end                 module name
fffff880`084ce000 fffff880`085b0000   eamonm   T (no symbols)           
    Loaded symbol image file: eamonm.sys
    Image path: \SystemRoot\system32\DRIVERS\eamonm.sys
    Image name: eamonm.sys
    Timestamp:        Tue Aug 02 10:33:29 2011 (4E37C469)
    CheckSum:         0003DB0B
    ImageSize:        000E2000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
The driver which is being blamed as a possible cause belongs to your ESET program, please remove ESET using the ESET Removal Tool, and then install and run full scans with these free alternatives which work the best with Windows 7 due to their lightweight nature on system resources and compatibility with the Windows operating system.

Install and perform full scans with:
information   Information
Remember to install the free version of Malwarebytes not the free trail; untick the free trial box during installation. MSE is the most lightweight and compatible with the Windows 7 operating system

You can also view this thread for a complete free and lightweight security protection combination:Remove:

Code:
Start Menu\Programs\ESET\ESET Smart Security
Start Menu\Programs\ESET
Code:
0: kd> !error c0000420
Error code: (NTSTATUS) 0xc0000420 (3221226528) - An assertion failure has occurred.
From what I have found, assertions are used in programs written in C++, to enable the program to close with a more obvious cause for the crash. It's basically used by programmers to make debugging much easier.
My System SpecsSystem Spec
Reply

 BSOD with error code 0x00000001E




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD - error 0x00000001e - need help
hey everyone, i think i have tried everything i could think. Still nothing, so i am coming to yall for help. i have included the dump files as well. windows 7 64 thanks for the help!!!!
BSOD Help and Support
BSOD PLaying League of Legends error code 0x0000001e a common code
Hello and good morning, I having problems with bsod mostly while playing league of legends but can occur randomly at other times. I have done memtest86, scanned the hard drive, and even took it to pcdirect where there installed a new motherboard but the problem has persisted. Thank you very much...
BSOD Help and Support
Multiple BSOD last 2 weeks - last was 0x00000001e
Hi everyone, Lately I've been getting multiple BSOD ranging form few minutes after I start my computer to 1 or 2 hours after, even just using my browser. Reaq in a post that it might be avg, since one of the errors mentioned avgtdia.sis, uninstalled it but it didnt work - BSOD keep...
BSOD Help and Support
BSOD error 0x0000001a, 0x00000001e, 0x0000007e etc
My comp is only a few months old. Has been crashing almost as long. Will crash when playing videos, movies or even crashed 3 times while trying to post this while nothing else was running. Windows 7 x86 original OS. retail. please help
BSOD Help and Support
Windows 7 64-bit BSOD, Stop error 0x00000001E, 3B and 50
Hi Everyone, My OS is getting numerous Blue screen errors since last week. When i turn on my computer it oftenly results a BSOD in a Stop Code: 0x00000001E or 0x00000003B error and sometimes a 0x000000050 error. However, it works fine if it can start normally. for example:...
BSOD Help and Support
Win7 Firewall won't turn on error code 0x6D9 and error code 0x80070424
Ok - I'm trying to fix my friends' computer - Toshiba Satellite L455-S5975 running Windows 7 32-bit Windows firewall is off and I need to "Update Firewall Settings". When I click use recommended settings, I get a message that says it "can't change some of your settings. Error code 0x80070424" I...
System Security


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:37.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App