Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Constant Crashes/BSOD with different error messages.

10 Jun 2013   #11
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

As per the zip you uploaded, the latest BSOD is of 08.06; which is a stop 0xA, and already checked earlier.

If you get a stop 0x1, I would suggest you to enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

information   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

warning   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

Tip   Tip

Let us know the results, with the subsequent crash dumps, if any. Post it following the Blue Screen of Death (BSOD) Posting Instructions.


My System SpecsSystem Spec
.
10 Jun 2013   #12
RugerBaby

Windows 7 Home Premium 64bit
 
 

ok, will do. Man this stuff is frustrating! Thanks again.
My System SpecsSystem Spec
10 Jun 2013   #13
RugerBaby

Windows 7 Home Premium 64bit
 
 

Enabled verifier.exe and restarted but now its says my computer was unable to start, startup repair.
My System SpecsSystem Spec
.

10 Jun 2013   #14
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Boot into Safe mode. Disable DV. Boot into normal mode again .... (it will do) and enable DV again. Make it sure that you are not selecting any driver supplied by "microsoft" or "unknown" and run the computer with DV on ... hopefully it will go to desktop before crashing again.
My System SpecsSystem Spec
10 Jun 2013   #15
RugerBaby

Windows 7 Home Premium 64bit
 
 

Ok, will make sure the unknown drivers arent checked, I might have checked them. Its crashed a couple times since then.
My System SpecsSystem Spec
10 Jun 2013   #16
RugerBaby

Windows 7 Home Premium 64bit
 
 

Heres the zip. Attachment 272054
My System SpecsSystem Spec
10 Jun 2013   #17
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

The bsod is caused by PxHlpa64.sys.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C9, {228, fffff880011eef74, fffff980016eed80, 0}

*** WARNING: Unable to verify timestamp for PxHlpa64.sys
*** ERROR: Module load completed but symbols could not be loaded for PxHlpa64.sys
Probably caused by : PxHlpa64.sys ( PxHlpa64+2f74 )

Followup: MachineOwner
---------
You need to uninstall it. A list of programs that includes the driver is here: pxHelp20.sys programs .. I will add quicktime with that list.

Uninstall any program contains that driver.

Do to C:\Windows\System32\drivers and C:\Windows\Syswow64\drivers, and delete PxHlpa64.sys manually.

BTW, MagicISO and MagicDisc, with their fake SCSI controller is present there, still.
My System SpecsSystem Spec
10 Jun 2013   #18
RugerBaby

Windows 7 Home Premium 64bit
 
 

ok, uninstalled pxhlpa64.sys and also deleted magiciso from the registry. I also deleted the mcdbus.sys. Hopefully everything is under control now.
My System SpecsSystem Spec
10 Jun 2013   #19
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Let us wait and see
My System SpecsSystem Spec
11 Jun 2013   #20
RugerBaby

Windows 7 Home Premium 64bit
 
 

son of a.. Woke up today and it has crashed a few times. No bsod this time, just freezes and locks up. My monitor starts flickering and then it freezes. Ive attached a zip but I dont believe any dmp files were created. Once again, thanks Arc.
My System SpecsSystem Spec
Reply

 Constant Crashes/BSOD with different error messages.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD increasingly frequent crashes; varying error messages.
Hi. In the last months, I've been experiencing an increasing number of BSOD crashes, which now happen on a daily bases. In addition to that, my system (Windows 7 pro 64 bit) for some reason stopped saving minidump files, as of last september. I am therefore enclosing my Event Viewer...
BSOD Help and Support
Crashes Sometimes/BSOD with different error messages.
Hello, I've been trying to figure out what is wrong with my diyed PC. I've started getting random BSOD's on my computer and I'm trying to work out what's triggering them. I've used memtest and no errors were found. They normally happen after a few hours. I'm using download software like...
BSOD Help and Support
Constant random BSOD errors, Multiple error messages on screen
Hi everyone, I've been constantly experiencing random blue screen errors with different error messages such as: INTERUPT_EXCEPTION_NOT_HANDLED KMODE_EXCEPTION_NOT_HANDLED PAGE_FAULT_IN_NONPAGED_AREA IRQL_NOT_LESS_OR_EQUAL My system at the moment is Windows 7 Ultimate x64 AMD Athlon II X3...
BSOD Help and Support
Constant BSODs, different error messages, win32.sys problem?
DUMP INFO IS ATTACHED. I DO *NO* OVERCLOCKING. Since this afternoon my computer has been constantly BSODing and it gives different error messages... a lot of the time my system just freezes up or reboots without even going to the BSOD. ANY help would be appreciated. I put the RAM in the...
BSOD Help and Support
Constant BSOD, crashes with Vista
Hey everyone, I'm having some serious issues on Vista and after trying several solutions, I'm at a complete loss. Not only am I getting consistant yet random BSOD's, but sometimes the computer refuses to boot and instead beeps several times. The most common BSOD notice seems to be...
BSOD Help and Support
Constant crashes - no error messages - please help
Ran memtest and seatools. No errors. System about 2 years old Windows OEM Home prem 64 bit Intel i7 920 6GB 1333MHz DDR3
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:24.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App