Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD USBPORT.SYS Please Help

09 Jun 2013   #1
bbeagle

Windows 7 Premium Home 64 bit
 
 
BSOD USBPORT.SYS Please Help

Hello:

I've been getting some BSODs before and after a clean (OEM) install of Windows 7 Home Pre3mium 64 Bit. I've run memtest (1 pass) on my RAM and it was fine. I'm working with an ASUS p5Q Pro board with an EN8400GS graphics card. I just added that card this week and had a crash after I installed (but I had them before as well). When the BSOD happened I was running 8MB of RAM, but I pulled it back to 4MB to see if that would avert another crash. I had hoped that installing the new version of Windows would help this, but it didn't. I've had crashes before and after the install.

I've attached my most recent crash dump files (1-4 with 1 being the most recent). Some crashes point to the USBPORT.SYS but others note a memory corruption.

I have the following using a USB port: a seagate goflex external drive; a wireless microsoft mouse and keyboard; a Cisco AE2500 wireless adaptor.

I don't recall doing anything specific for any of the BSOD crashes that trigger this.

Is this enough information? I'm sorry if I didn't include enough or have posted this in the wrong spot.

Any help would be appreciated.

Thanks.


My System SpecsSystem Spec
.
09 Jun 2013   #2
x BlueRobot

 

My System SpecsSystem Spec
09 Jun 2013   #3
bbeagle

Windows 7 Premium Home 64 bit
 
 

Ahhh... sorry. I've attached the required zip file with the crash dump files.
My System SpecsSystem Spec
.

09 Jun 2013   #4
x BlueRobot

 

Code:
BugCheck D1, {ffdca2a1, 2, 0, fffff88003f7185f}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption
Code:
Usual causes:  Device driver
This bugcheck indicates that a kernel-mode driver has attempted to access a invalid memory address, and interrupt the current process, whilst the IRQL level was too high.

Code:
CHKIMG_EXTENSION: !chkimg -lo 50 -d !USBPORT
    fffff88003f71860 - USBPORT!USBPORT_Core_FlushCompletedAborts+3c
	[ 4a:48 ]
1 error : !USBPORT (fffff88003f71860)
There seems to either be a corrupted RAM module or the driver itself has become corrupted.Run Memtest86+ for least 9-10 passes, and preferably overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

Quote   Quote: Originally Posted by Arc View Post
testSlot1Slot2
RAM1ErrorError
RAM2GoodGood
It is a RAM, a bad RAM.

But if you have got a result like that:
testSlot1Slot2
RAM1ErrorGood
RAM2ErrorGood
It is a motherboard issue. The particular slot is bad.
There's seems to be a issue with some of the USB drivers, follow these steps:
  1. Start
  2. Type: Device Manager
  3. Expand USB Controllers
  4. Uninstall driver (for every listed device)
  5. Reboot
The drivers should now be automatically reconfigured by Windows upon reboot.

If you are using any USB devices, then remove these from the USB ports (leave keyboard and mouse), and then update all the devices with the latest drivers, including the mouse and keyboard if applicable.

Turn off USB Suspension:
My System SpecsSystem Spec
09 Jun 2013   #5
bbeagle

Windows 7 Premium Home 64 bit
 
 

Thank you for the quick response. I'll give this a try and let you know if this solved the problem.
My System SpecsSystem Spec
Reply

 BSOD USBPORT.SYS Please Help




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
USBPORT.SYS Causing BSOD Please help.
About 2 weeks ago my new computer had its first blue screen crash. It happened when playing Kerbal Space Program. The first thing I did was update my video drivers, but that didn't help. Then I used windows debug and it told me "likely caused by USBPORT.SYS" after that I uninstalled all the usb...
BSOD Help and Support
BSOD playing LOL,USBPORT.SYS
Hi to all,while i play LOL it randomly crashes and then usually a BSOD comes up,or suddenly a BSOD comes w/o lol crash.It's been 2 years or so since i got the last BSOD,i think it is a heat problem,and i need to clean the specs.But i need you to confirm it.
BSOD Help and Support
BSOD - May be cause by usbport.sys
win 7 Home premium 64bit, original window, New laptop < 1 month, never reinstall. my computer have crashed a few time starting from the 1st day i get it. When i use whocrashed to check, it state that is usbport.sys make it. The thing normally happen when the computer is idel, but something...
BSOD Help and Support
New BSOD - usbport.sys
================================================== Dump File : 060910-25942-01.dmp Crash Time : 09/06/2010 22:04:44 Bug Check String : DRIVER_IRQL_NOT_LESS_OR_EQUAL Bug Check Code : 0x000000d1 Parameter 1 : fffff500`0af13840 Parameter 2 : 00000000`00000002...
BSOD Help and Support
USBPORT.SYS causing BSOD
I just upgraded to Windows 7 (64 bit) last weekend by doing a clean install from a win741.com purchase. I am currently using a HP Pavilion a6500f computer with a 500GB hard drive. I have been getting BSOD errors over the last several days and it is driving me crazy. I am considering going back to...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:45.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App