BSOD Memory_Management and random crash without BSOD

Please follow - Blue Screen of Death (BSOD) Posting Instructions

can anyone help me?

Read Post #2 please, you haven't uploaded all the necessary files to help you with.

x BlueRobot said:

Read Post #2 please, you haven't uploaded all the necessary files to help you with.

ive attached the zip file already. sorry about that.

You appear to have only 121 updates installed, I currently have 205 updates on my system, please check and install all Important and Optional Windows Updates:

1. Start
2. Type: Windows Update
3. Check for Updates/Install all Updates
4. Reboot (if prompted)

Remove:

Code:

0: kd> lmvm iaStor
start             end                 module name
fffff880`01015000 fffff880`013b9000   iaStor   T (no symbols)           
    Loaded symbol image file: iaStor.sys
    Image path: \SystemRoot\system32\DRIVERS\iaStor.sys
    Image name: iaStor.sys
    Timestamp:        Thu Feb 02 00:15:24 2012 (4F29D59C)
    CheckSum:         0008B2F8
    ImageSize:        003A4000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Please remove the Intel Rapid Storage driver, is a very well known cause for BSODs for Windows 7 and Windows 8, follow these steps to allow Windows to install it's own driver:

1. Start
2. Type: Device Manager
3. Expand: Disk Drives
4. Remove Intel Rapid Storage
5. Reboot

Install and perform full scans with:

• Malwarebytes : Free anti-malware download
• Microsoft Security Essentials | Protect against viruses, spyware, and other malware

   Information

Remember to install the free version of Malwarebytes not the free trail; untick the free trial box during installation. MSE is the most lightweight and compatible with the Windows 7 operating system

You can also view this thread for a complete free and lightweight security protection combination:

• Good and Free system security combination.

Code:

BugCheck 50, {fffff87fc4a4b120, 1, fffff80002ea2f8d, 5}


Could not read faulting driver name
Probably caused by : hardware ( nt!NtYieldExecution+1d )

Code:

Usual causes:  Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus,  Device driver, NTFS corruption, BIOS

Most of the BSODs seem to all point towards a illegal page fault, which is usually caused by drivers, please follow these steps:

Update:

Code:

1: kd> lmvm atikmdag
start             end                 module name
fffff880`05a13000 fffff880`06586000   atikmdag T (no symbols)           
    Loaded symbol image file: atikmdag.sys
    Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
    Image name: atikmdag.sys
    Timestamp:        Fri Mar 29 02:27:04 2013 (5154FBF8)
    CheckSum:         00B25604
    ImageSize:        00B73000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

WHQL
Release Date: April 24th 2013
Version: 13.4
In Device Manager: 12.104

• Latest AMD Catalyst Video Driver for Windows 7

However, the BSOD seems to point to a unknown possible hardware error, and since the graphics card drivers are blamed, although most likely the latest version, then I would also suggest running a test on the graphics card:

• Video Card - Stress Test with Furmark

   Warning

Read all the steps within the hardware test tutorials very carefully, as stress tests is designed run components to their maximum capacity, in order to point out failing or faulty hardware components

Use the following program to monitor your hardware temperatures during the stress test:

• CPUID HWMonitor

Code:

BugCheck 3B, {c0000005, fffff80002e7df9a, fffff8800884c2b0, 0}

Probably caused by : hardware ( win32k!DEVLOCKBLTOBJ::bLock+6b3 )

Code:

Usual causes:  System service, Device driver, graphics driver, memory

How long did you manage to run the test for? win32k.sys is commonly used for graphics-related function calls and communication with graphics drivers, therefore I feel there may still a graphics related cause.

What are temperatures of your graphics card under load (playing games) and idle (doing nothing)?

Post the temperature of your GPU in the two different situations using - Screenshots and Files - Upload and Post in Seven Forums

• RAM - Test with Memtest86+

Run Memtest86+ for least 9-10 passes, and preferably overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

Arc said:

No code has to be inserted here. It is a RAM, a bad RAM.

But if you have got a result like that:
No code has to be inserted here. It is a motherboard issue. The particular slot is bad.