Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD: Unexpected Kernel Mode Trap - 0X1000007f

12 Jun 2013   #1
navjot001

Microsoft Windows 7 Ultimate 32-bit 7600 Multiprocessor Free
 
 
BSOD: Unexpected Kernel Mode Trap - 0X1000007f

Hey Guys,

I am new to the forum & this is my first post here... I need help!

Yesterday for the first time I got a BSOD & I was not able to read anything it just restarted, then everything looked alright.

Today again I got the same BSOD, after the restart i looked a bit into it and was able to read the dump file... but didn't understood anything

The minidump file is attached in the post.

I hope you guys will help me solve this problem!

Thanks


My System SpecsSystem Spec
.
12 Jun 2013   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

My System SpecsSystem Spec
12 Jun 2013   #3
navjot001

Microsoft Windows 7 Ultimate 32-bit 7600 Multiprocessor Free
 
 

@ARC I think i followed that post. Downloaded the SF Diagnostic tool, clicked grab all & uploaded the zip file (with the minidump of bsod).
My System SpecsSystem Spec
.

12 Jun 2013   #4
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Did it generate a single .dmp file only? Not any other text files and one .nfo file?
My System SpecsSystem Spec
12 Jun 2013   #5
navjot001

Microsoft Windows 7 Ultimate 32-bit 7600 Multiprocessor Free
 
 

@ARC

Sorry, My bad. Ran it again and attached the .zip file.

Thanks Attachment 272325
My System SpecsSystem Spec
13 Jun 2013   #6
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

According to Carrona.org, STOP 0x0000007F: UNEXPECTED_KERNEL_MODE_TRAP

Usual causes:
Memory corruption, Hardware (memory in particular), Overclocking failure, Installing a faulty or mismatched hardware (especially memory) or a failure after installing it, 3rd party firewall, Device drivers, SCSI/network/BIOS updates needed, Improperly seated cards, Incompatible storage devices, Overclocking, Virus scanner, Backup tool, Bad motherboard, Missing Service Pack

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.
Code:
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack Center - Microsoft Windows

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Stress test the CPU.
Hardware - Stress Test With Prime95

Seatool for dos: SeaTools | Seagate download. Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests", then select "Long Test" and let it run.

Are you overclocking? As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings. Also set the BIOS to default, too.
How To Clear CMOS (Reset BIOS)

You use NVIDIA nForce Serial ATA Controller (SCSI) which is very old.
Code:
88b92000 88bb7000   nvstor     (deferred)             
    Image path: \SystemRoot\system32\DRIVERS\nvstor.sys
    Image name: nvstor.sys
    Timestamp:        Wed May 20 12:14:09 2009 (4A13A6B9)
    CheckSum:         00023198
    ImageSize:        00025000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
But no updates are available at ASUSTeK Computer Inc. -Support- Drivers and Download M2N68-AM SE2 . You may try it in nvidia. Go to Drivers - Download NVIDIA Drivers, search for nForce, as per your motherboard's chipset specifications.


At the same time, if it is possible, plan to update the BIOS. Your BIOS is old, too.
Code:
BIOS Version/Date    American Megatrends Inc. 0212, 1/16/2009
There are possible updates in ASUSTeK Computer Inc. -Support- Drivers and Download M2N68-AM SE2, the most recent one is Version 1801, dated 2012/08/15.

Understand that the BIOS update is risky. If you are not savvy with it, take help of somebody who can do it.

Let us know the results.
_______________________________________________________________________________________
BSOD ANALYSIS:
Code:
: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

UNEXPECTED_KERNEL_MODE_TRAP_M (1000007f)
This means a trap occurred in kernel mode, and it's a trap of a kind
that the kernel isn't allowed to have/catch (bound trap) or that
is always instant death (double fault).  The first number in the
bugcheck params is the number of the trap (8 = double fault, etc)
Consult an Intel x86 family manual to learn more about what these
traps are. Here is a *portion* of those codes:
If kv shows a taskGate
        use .tss on the part before the colon, then kv.
Else if kv shows a trapframe
        use .trap on that value
Else
        .trap on the appropriate frame will show where the trap was taken
        (on x86, this will be the ebp that goes with the procedure KiTrap)
Endif
kb will then show the corrected stack.
Arguments:
Arg1: 00000008, EXCEPTION_DOUBLE_FAULT
Arg2: 801e0000
Arg3: 00000000
Arg4: 00000000

Debugging Details:
------------------

ADDITIONAL_DEBUG_TEXT:  

FAULTING_MODULE: 83215000 nt

DEBUG_FLR_IMAGE_TIMESTAMP:  0

BUGCHECK_STR:  0x7f_8

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

CURRENT_IRQL:  0

MISALIGNED_IP: 
nt!TmEnlistmentObjectType+6774
8335b820 009202000000    add     byte ptr [edx+2],dl

LAST_CONTROL_TRANSFER:  from 00000000 to 8335b820

STACK_TEXT:  
89d1d008 00000000 8335b820 00000008 00210086 nt!TmEnlistmentObjectType+0x6774


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nt!TmEnlistmentObjectType+6774
8335b820 009202000000    add     byte ptr [edx+2],dl

SYMBOL_STACK_INDEX:  0

SYMBOL_NAME:  nt!TmEnlistmentObjectType+6774

FOLLOWUP_NAME:  MachineOwner

IMAGE_NAME:  hardware

MODULE_NAME: hardware

FAILURE_BUCKET_ID:  IP_MISALIGNED

BUCKET_ID:  IP_MISALIGNED

Followup: MachineOwner
---------
My System SpecsSystem Spec
Reply

 BSOD: Unexpected Kernel Mode Trap - 0X1000007f




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD "Unexpected Kernel Mode Trap" without errorNo (W8.1)
Hi, I'm on Windows 8.1 (I don't think there's eightdotoneforums.com) and I had this BSOD a lot of times for a few days. I have removed any hardware I added (just a bluetooth dongle) and it still happens. If I do a restoration to a previous state, it works again only if I go in safe mode first. So...
BSOD Help and Support
BSOD 0x7f unexpected kernel mode trap caused by ntoskrnl.exe
Hello, I'm getting this bsod almost every day, it happens randomly: when playing, surfing internet, idle. I have tested ram with memtest, no errors. Updated graphic card drivers, updated bios. ATM I have taken off one ram model to test if other one is faulty. Here is bugcheck analysis:...
BSOD Help and Support
BSOD "Unexpected Kernel Mode Trap" occurring randomly
My computer is just a few months old, started getting BSOD's randomly, usually when on desktop or just running Chrome browser. System details: Windows 7 Pro 64 Gigabyte Z77-HD3 Intel i5 3.4MHz AMD Radeon 7700HD 8GB DDR3
BSOD Help and Support
Unexpected Kernel Mode trap
Just recently I've been getting blue screen crashes at apparently random intervals, all due to the same cause, according to NirSoft's BlueScreenView, which reports Unexpected_Kernel_Mode_Trap caused by address ntoskrnl.exe+70740. How do I troubleshoot this, because I have absolutely no idea. I...
BSOD Help and Support
BSOD 2-3 times a day, error: Unexpected Kernel Mode Trap-ntoskrnl.exe
Is Windows 7... -x64 Professional Edition -Custom Build -Re-installed Windows 3 months ago Built in September of 2010. Getting the BSOD almost everyday now and have no idea how to fix it. Thanks for any and all help!!!
BSOD Help and Support
BSOD - Unexpected kernel mode trap
Hi, I'm using an Asus A52JE notebook, which is about 2 months old. I'm using the Windows 7 Home Premium 64bit Version that came with the system on the recovery partition. I didn't install any new hardware. Since I got the new notebook, I'm getting BSODs after the system has been running for a...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:40.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App