Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Bsod: 7e

14 Jun 2013   #1
rydan

Windows 7 Ultimate x64
 
 
Bsod: 7e

Hey guys, first post writing from iphone so bear with me.

It started yesterday while launcing a twitch video, had just turned of my own xsplit broadcast but not closed it down yet and I got a BSOD with this message: 0x0000007E (0xFFFFFFFFC0000005, 0xFFFFF800033AB35A, 0xFFFFF880033A13E8, 0xFFFFF880033A0C40)

Did some searching and apparently many seem to think 7E is video card related. I have tried to launch safe mode, with or without command prompt it stops at loading driver classpnp.sys followed by a flash of Bluescreen and reboot. I have launched with windows disc to use the auto repair too and it restarts into BSOD. also last safe config also goes into BSOD.

Now I wonder if u guys have any idea where to proceed next? As you may understand I am not getting inside the computer at all, cannot access crash dumps or install the SF tool..

Hope this is enough in order to proceed in a good direction. Thanks in advance.


Specs: Custom build Desktop PC
OS: Windows 7 Ultimate x64
CPU: Intel core i5
Motherboard: Gigabyte GA-P55
Memory: 2+2gb ocz, 4+4gb kingston
Graphics Card(s): XFX Radeon 4890 1Gb
Monitor(s) Displays: 40" FullHD LCD Tv
Screen Resolution: 1080p
Hard Drives: Intel SSD 80Gb with OS on
PSU: Corsair 600W
Case: Fractal Design R3


My System SpecsSystem Spec
.
14 Jun 2013   #2
x BlueRobot

 

My System SpecsSystem Spec
14 Jun 2013   #3
rydan

Windows 7 Ultimate x64
 
 

I take it you did not read my post..? I have not been able to access my computer since yesterday evening and have no way of installing the application suggested in that link, unless you have an alternate way?

I can update my initial post with a Windows memory check that detected problems, but can't find the log that says what, followed by a scan disk that found no issues. I'm sorry if I seem rude but I really am at loss of what to do. Any tip on how to access safe mode would be appreciate, or is it a lost cause? Am I better off just reinstalling windows from scratch?

Maybe there is a way to access the computer "blind" or LQ graphics, assuming that 0x000000007E is a video problem that is.. I really feel that I'm grasping for straws now, but I really need some kind of breakthrough to work with.. Still writing from my phone ^^

Thanks in advance
My System SpecsSystem Spec
.

14 Jun 2013   #4
x BlueRobot

 

You seem to have RAM issues or even a bad motherboard DIMM slot, which is a very common reason for a unbootable system. I would suggest removing all the sticks apart from one, and then see if the system boots, if it doesn't, then with the same stick move it to a different slot and attempt to boot again.
My System SpecsSystem Spec
14 Jun 2013   #5
rydan

Windows 7 Ultimate x64
 
 

Aaaaah.... Finally online again... Removed all except one, nothing happend not even bios, moved it to next slot and im all good... So, poor DIMM slot then i guess? I guess that means time for new motherboard...

Thank you sir, you are a genious!
My System SpecsSystem Spec
15 Jun 2013   #6
rydan

Windows 7 Ultimate x64
 
 

One more thing, I would like to make sure wether it actually is the mobo or ram pieces that are faulty, could you advice on a good diagnostic tool to use for that purpose? Or is that better off left to a manufacturer/service provider?
My System SpecsSystem Spec
15 Jun 2013   #7
x BlueRobot

 

Here is my common template for testing RAM issues -
Run Memtest86+ for least 9-10 passes, and preferably overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

Quote   Quote: Originally Posted by Arc View Post
testSlot1Slot2
RAM1ErrorError
RAM2GoodGood
It is a RAM, a bad RAM.

But if you have got a result like that:
testSlot1Slot2
RAM1ErrorGood
RAM2ErrorGood
It is a motherboard issue. The particular slot is bad.
My System SpecsSystem Spec
Reply

 Bsod: 7e




Thread Tools Search this Thread
Search this Thread:

Advanced Search



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:32.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App