Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: System BSOD - Clock

28 Jun 2013   #11
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Technical Preview 64-bit
 
 

Quote   Quote: Originally Posted by x BlueRobot View Post
Can I just ask why do you want your computer to BSOD? What test are you running? Driver Verifier?
My post to him ... a week ago.
Quote:
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.
Is he still running it?


My System SpecsSystem Spec
.

28 Jun 2013   #12
ZMan

windows 7 professional x32
 
 

Haven't have the time to fully set and watch the test, don't want it to run it by itself and it blow up if that the case. GPU and CPU test will happen this evening. Memory test tomorrow morning.
My System SpecsSystem Spec
28 Jun 2013   #13
x BlueRobot

 

Driver Verifier will be safe to leave running, it's designed to monitor the drivers installed on your system, and create a BSOD if the drivers' behavior meets a certain variable set when configuring Driver Verifier.
My System SpecsSystem Spec
.


01 Jul 2013   #14
ZMan

windows 7 professional x32
 
 

All test show that there nothing wrong but it still doing it....mmmmm Any ideas?
My System SpecsSystem Spec
01 Jul 2013   #15
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Technical Preview 64-bit
 
 

Quote   Quote: Originally Posted by ZMan View Post
All test show that there nothing wrong but it still doing it....mmmmm Any ideas?
Which it is still doing what it?
My System SpecsSystem Spec
02 Jul 2013   #16
ZMan

windows 7 professional x32
 
 

The original BSOD from the first post
An expected clock interrupt was not received on a secondary processor in anMP system within the allocated interval.
My System SpecsSystem Spec
02 Jul 2013   #17
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Technical Preview 64-bit
 
 

Quote   Quote: Originally Posted by ZMan View Post
The original BSOD from the first post
An expected clock interrupt was not received on a secondary processor in anMP system within the allocated interval.
Post it following the Blue Screen of Death (BSOD) Posting Instructions.
My System SpecsSystem Spec
02 Jul 2013   #18
x BlueRobot

 

Ensure you have configured a Kernel Memory dump instead, if a Stop 0x101 is still occurring, a Minidump will not contain enough information - Dump Files - Configure Windows to Create on BSOD

You will need to place the file into a zipped folder, and then upload to a file sharing site such as Dropbox or Skydrive. Make sure the folder is placed in the Public folder if using Skydrive. Post the link to the file afterwards.

Is Driver Verifier still running? Stop 0x101's with Driver Verifier running, indicate more of a hardware related issue.
My System SpecsSystem Spec
02 Jul 2013   #19
ZMan

windows 7 professional x32
 
 

Quote   Quote: Originally Posted by Arc View Post
Quote   Quote: Originally Posted by ZMan View Post
The original BSOD from the first post
An expected clock interrupt was not received on a secondary processor in anMP system within the allocated interval.
Post it following the Blue Screen of Death (BSOD) Posting Instructions.
Here is the BSOD. What going on now is that sometimes the system starts to respond slowly. An example is that the mouse arrow disappear and takes a moment to get caught up with where I'm moving the mouse. Control+Alt+Delete responds slow as well. Only a few moments and then it back to working fully. I check out the processing but couldn't see anything out of the norm. When this is happening I shut down the system and than it all speeds down like it turn off no fans running or CPU spinning away but it still on. I then have to cold boot it to make it turn off. It makes no sense. A full system scan with MSE and other virus and trojan scanners show nothing. :/
My System SpecsSystem Spec
02 Jul 2013   #20
ZMan

windows 7 professional x32
 
 

Quote   Quote: Originally Posted by x BlueRobot View Post
Ensure you have configured a Kernel Memory dump instead, if a Stop 0x101 is still occurring, a Minidump will not contain enough information - Dump Files - Configure Windows to Create on BSOD

You will need to place the file into a zipped folder, and then upload to a file sharing site such as Dropbox or Skydrive. Make sure the folder is placed in the Public folder if using Skydrive. Post the link to the file afterwards.

Is Driver Verifier still running? Stop 0x101's with Driver Verifier running, indicate more of a hardware related issue.
Driver Verfier is still running and Kernal Memory dump has been setup up for months before this even started to happen. There is not file tho in the location on the C Root.
My System SpecsSystem Spec
Reply

 System BSOD - Clock




Thread Tools





Similar help and support threads
Thread Forum
System clock going slow
Hi Sir, My system clock is not being able to match up with the proper time when i boot up my machine... it is lagging behind by approximately something around 7 or 8 hours,whenever i boot my pc for the first time the clock is not displaying the proper time,but after rectifying it if i restart or...
Performance & Maintenance
Over Clock a System Questions
I have over clocked my systems by a few hundred megahertz at the most in the past. How do I over clock by over a gigahertz ? I have the cooling, I know that raising the multiplier and the voltage are the key ingredients to a good over clock. I don't want to just take a stab at it and make the...
PC Custom Builds and Overclocking
System time clock
hi all :)\ has anyone had trouble with the clock changing its time and date at random ? i run windows 7 on my main hard drive and linux kubuntu on a ssd drive and was wondering if this is the cause? i only noticed today when my security software would not update and when i downloaded a program and...
General Discussion
Default system clock
Could someone please post the original timedat.cpl file, the one that comes pre installed with windows? i changed my clock a while back and seem to have deleted my original
Customization
How do I set the system clock to 24hr time ?
For example right now as I type this it's currently 9:09 PM, how would I go about setting it to 21:09 ?
Customization
System Tray Clock Display
(1) How can I get the sys tray clock to show hh:mm:ss tt ? I changed the short and long time format yet "ss" is not showing expect when I move cursor over clock. Changes to date format reflect in sysclock right away. (2) Is there a freeware clock available that is Win 7 compatible that I...
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:16.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App