Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD When Trying to Create Recovery Disk in Maxrium Reflect

20 Jun 2013   #1
jolafson

Windows 7 Professional x64
 
 
BSOD When Trying to Create Recovery Disk in Maxrium Reflect

Downloaded Maxrium Reflect free edition. The first thing I did was try to create a recovery disk and each time I got the BSOD. I ran the SF Diagnostic Tool but I don't think it captured everything. But I am still attaching the results that I got. If anyone can make sense out of the dump logs, let me know. For now I am uninstalling the product and will look for something else. Thanks.


My System SpecsSystem Spec
.

21 Jun 2013   #2
x BlueRobot

 

Code:
BugCheck 44, {8a037890, e7a, 0, 0}

*** WARNING: Unable to verify timestamp for SRTSP.SYS
*** ERROR: Module load completed but symbols could not be loaded for SRTSP.SYS
Probably caused by : SRTSP.SYS ( SRTSP+6e28f )
Code:
Usual causes:  Device driver(s)
This bugcheck indicates that a device driver has requested for a IRP to completed by sending multiple IoCompleteRequest() calls, even though the IRP has already been completed.

Code:
0: kd> lmvm SRTSP
start    end        module name
aed47000 aedde000   SRTSP    T (no symbols)           
    Loaded symbol image file: SRTSP.SYS
    Image path: \SystemRoot\System32\Drivers\N360\1403010.016\SRTSP.SYS
    Image name: SRTSP.SYS
    Timestamp:        Fri Jan 25 21:24:39 2013 (5102F817)
    CheckSum:         000A17EA
    ImageSize:        00097000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Your Norton/Symantec AutoProtect driver seems to causing problems here, Norton/Symantec products are known to cause BSODs with Windows 7, please remove the program completely using the Norton Removal Tool, and then install these free and proven alternatives which work best with Windows 7, due to their compatibility and lightweight nature on system resources.

Install and perform full scans with:
information   Information
Remember to install the free version of Malwarebytes not the free trail; untick the free trial box during installation. MSE is the most lightweight and compatible with the Windows 7 operating system

You can also view this thread for a complete free and lightweight security protection combination:Note: All the BSODs were Stop 0x44 and all pointed to the same driver.
My System SpecsSystem Spec
21 Jun 2013   #3
jolafson

Windows 7 Professional x64
 
 
Maxrium BSOD

Thanks for the information, but I am very dependant on Norton for other tools so I do not want to remove it. I will report problem to Norton. Thanks again, but I'm curious, how did you read the .DMP files to find the error? I will mark thread as solved.

Jerry
My System SpecsSystem Spec
.


21 Jun 2013   #4
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Reading Dmp files requires a specialist application, e.g. WinDBG
My System SpecsSystem Spec
21 Jun 2013   #5
x BlueRobot

 

Welcome and glad to help, and Configuring the "Debugging Tools" may help you download the debugger and complete the setup.

There are a wide range of extensions and commands you will also need to learn for debugging.
My System SpecsSystem Spec
21 Jun 2013   #6
jolafson

Windows 7 Professional x64
 
 
Solution from Maxrium

Just thought I'd add that I heard from Maxrium Support and the issue I had is known to them. They provided me with the following link to the solution and it just requires temporarily suspending Norton Anti-Virus.

http://kb.macrium.com/KnowledgebaseArticle50175.aspx

Followed their directions and was able to create a Rescue Disk. Thanks again for you help.

Jerry
My System SpecsSystem Spec
21 Jun 2013   #7
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Uninstall Norton and install MSE instead .
My System SpecsSystem Spec
21 Jun 2013   #8
jolafson

Windows 7 Professional x64
 
 

Thanks for your advice, but Norton has some features that I rely on heavily - particularly the Login and Password Vault. I'll stay with Norton for now.
My System SpecsSystem Spec
21 Jun 2013   #9
x BlueRobot

 

Glad to help
My System SpecsSystem Spec
Reply

 BSOD When Trying to Create Recovery Disk in Maxrium Reflect




Thread Tools





Similar help and support threads
Thread Forum
MACRIUM REFLECT - Create Bootable Rescue USB Drive
How to Create a Bootable Rescue USB Flash Drive for Macrium Reflect In order to restore a Macrium image when your Windows operating system cannot be started, you are required to boot from a rescue CD, which holds a compact Linux operating system. The Linux operating system on this rescue CD...
Tutorials
How do i create recovery disk for new HP Laptop?
Hi everyone i just got a new HP laptop. I already figured out how to create a recovery disk. Now how can i safely remove all the bloatware? do i just go to control panel and remove programs one by one or is there an easier way? thx Specs: http://imageshack.us/a/img12/3397/hplaptopa.jpg
Installation & Setup
Why can't I create a password recovery disk in Windows 7 Home 64
I tried the "create a password reset disk" wizard and although most all tutorials and sources of reference call it a disk, using my DVD/CD drive to create a "disk" is excluded from the options presented. When I edit and enter the drive letter I get the error message: "The disk is not a password...
Performance & Maintenance
Cannot access HP recovery (F11) after using Macrium Reflect
Hi, previously I used Macrium Reflect to do an image of my HP laptop's hard disk, and yesterday, i tried to recover using the image, everything was successful, however, I cannot access the recovery partition anymore. Pressing F11 while booting does not boot into Recovery Manager anymore like it...
Installation & Setup
Can't Create a recovery disk in my windows 7 need some help pls!
I post some screenshot so you will know what is going on! u know that Disk Named Fritz Its the recovery disk :(( Im very stupid I put some stupid file on it! plsss help me! i need to reformat my computer badly! ---19Fritz92---
Performance & Maintenance

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:04.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App