Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD random Occurances, error with WER-74443-0

21 Jun 2013   #1
darthdrache

windows 7
 
 
BSOD random Occurances, error with WER-74443-0

I have tried reg cleaner and a few orhter tips I found on the forums but I am still having issues.. it happens at random times durring either browser games or MMORPG#s but has not yet happened durring idle. can you please give me a little insite?


My System SpecsSystem Spec
.
21 Jun 2013   #2
Dsprague

Microsoft Community Contributor Award Recipient

Windows 7 enterprise 64 bit, Windows 7 Pro 64 bit ,Windows 8 64bit
 
 

It appears that this is a hardware level error:

Code:
kd> !errrec fffffa8007ff2028
===============================================================================
Common Platform Error Record @ fffffa8007ff2028
-------------------------------------------------------------------------------
Record Id     : 01ce6e9f7e324c24
Severity      : Fatal (1)
Length        : 928
Creator       : Microsoft
Notify Type   : Machine Check Exception
Timestamp     : 6/21/2013 17:20:43 (UTC)
Flags         : 0x00000000

===============================================================================
Section 0     : Processor Generic
-------------------------------------------------------------------------------
Descriptor    @ fffffa8007ff20a8
Section       @ fffffa8007ff2180
Offset        : 344
Length        : 192
Flags         : 0x00000001 Primary
Severity      : Fatal

Proc. Type    : x86/x64
Instr. Set    : x64
Error Type    : Cache error
Operation     : Generic
Flags         : 0x00
Level         : 2
CPU Version   : 0x00000000000206a7
Processor ID  : 0x0000000000000003

===============================================================================
Section 1     : x86/x64 Processor Specific
-------------------------------------------------------------------------------
Descriptor    @ fffffa8007ff20f0
Section       @ fffffa8007ff2240
Offset        : 536
Length        : 128
Flags         : 0x00000000
Severity      : Fatal

Local APIC Id : 0x0000000000000003
CPU Id        : a7 06 02 00 00 08 10 03 - bf e3 9a 1f ff fb eb bf
                00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
                00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

Proc. Info 0  @ fffffa8007ff2240

===============================================================================
Section 2     : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor    @ fffffa8007ff2138
Section       @ fffffa8007ff22c0
Offset        : 664
Length        : 264
Flags         : 0x00000000
Severity      : Fatal

Error         : GCACHEL2_ERR_ERR (Proc 3 Bank 8)
  Status      : 0xbe2000000005110a
  Address     : 0x00000000001f4ec0
  Misc.       : 0x000000d00002c086
Looking at the error record we can see that it is an L2 cache error.

So some diagnostics to run:

Prime 95 to stress test your CPU:
Free Software - GIMPS

Quote:
Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight you may want to run the "Small FFTs" test instead.
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
The Test selection box and the stress.txt file describes what components that the program stresses.
Also keep an eye on your CPU GPU temperatures during these tests,as the error you are getting can also be caused by overheating.

Furmark to stress test you GPU:
FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net
Quote:
FurMark Setup:
- If you have more than one GPU, select Multi-GPU during setup
- In the Run mode box, select "Stability Test" and "Log GPU Temperature" (BurnIn test in newer versions).
Click "Go" to start the test
- Run the test until the GPU temperature maxes out - or until you start having problems (whichever comes first).
- Click "Quit" to exit
My System SpecsSystem Spec
22 Jun 2013   #3
darthdrache

windows 7
 
 
rewiew reply

wow thanks!! i tried the prime 95 and it crashed right away I have done the memtest for about 24hours with no fails. <i will test the prime in some different configurations and see if I can get a more precise diagnosis. could this mean i need to replace my cpu or try to adjust some settings in my BIOS maybe?
My System SpecsSystem Spec
.

24 Jun 2013   #4
Dsprague

Microsoft Community Contributor Award Recipient

Windows 7 enterprise 64 bit, Windows 7 Pro 64 bit ,Windows 8 64bit
 
 

It may be a failing CPU but before you go replacing the CPU first try resetting the BIOS to default settings, if that doesnt work try updating the BIOS (assuming there is an update). The BIOS update should be available on the motherboard manufacturers website.
My System SpecsSystem Spec
Reply

 BSOD random Occurances, error with WER-74443-0




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Random Occurances
It has been happening for a month or so. I can be doing virtually anything and my computer will freeze up and die. I usually have Skype, Spotify, or Youtube up when it happens if that helps any. I read your tutorial and I have the attached dump files requested. I would appreciate any help this is...
BSOD Help and Support
Random BSOD Occurances...
We'll for the past few days every time I'm AFK from my desktop Iv'e noticed that its turned off and when I turn it back on it starts and monitor goes off then comes back onto the windows loading screen, Then I did get Windows recovered from an unexpected restart, Also may I be linked to a Comodo...
BSOD Help and Support
BSOD random occurances
Hi guys, I have been getting random BSODs here and there and is a bit stumped on what to do. So far this is what I have done: 1 - Memory scan 2 - HDD scan (checkdisk utility) 3 - Update all drivers 4 - Performed windows updates 5 - Install windows 7 AND repeated (3 and 4)
BSOD Help and Support
Random BSOD occurances, STOP: 0x000000F4
I've been having random BSOD crashes for the past week. Also, multiple attempts to fix the BSOD problem by using System Restore has resulted in a BSOD crash. Every BSOD has displayed "STOP: 0x000000F4" To my knowledge, no new hardware has been installed on my computer in several months. ...
BSOD Help and Support
0x0000001e and 0x0000007f BSOD, Random Occurances
I started off getting the 0x0000007f BSOD and I think it was relating to my graphics card drivers so I reinstalled the drivers, now I've been getting 0x0000001e BSOD and I haven't a clue what the problem is. These seem to happen only once each day and I can't seem to find any relation to what I...
BSOD Help and Support
BSOD at logoff, multiple computers, random occurances
We have 3 middle school labs of 30 Dell Optiplex 380 running Win 7 Pro, 1 GB RAM. Each lab has BSOD at logoff at random times, random machines. Here is one: Problem signature: Problem Event Name: BlueScreen OS Version: ...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:15.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App