New
#11
Came back with no integrity violations first time.
Came back with no integrity violations first time.
hmm interesting..... let me see if I can get other eyes on the problem, in the mean time try stress testing your GPU to see if that is where the problem lies:
FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net
FurMark Setup:
- If you have more than one GPU, select Multi-GPU during setup
- In the Run mode box, select "Stability Test" and "Log GPU Temperature" (BurnIn test in newer versions).
Click "Go" to start the test
- Run the test until the GPU temperature maxes out - or until you start having problems (whichever comes first).
- Click "Quit" to exit
OK upon a suggestion from another one of our BSOD analysts (x BlueRobot) I am going to have you set your computer to generate kernal memory dumps rather than small memory dumps.
To do this please follow the this tutorial:
Dump Files - Configure Windows to Create on BSOD
follow steps one through four in the tutorial then skip to step 7
follow all parts of step 7 (A,B,C, and D) step D will have you skip to step nine.
Then once you have another crash please upload the new set of files here.
EDIT:
I forgot to mention please upload this file to a file sharing site like Dropbox or Skydrive and rather than zipping the file just upload the whole thing there.
Hi
Been away from home, back now!
OK, set up for kernal memory dumps!
Will wait for crash...thanks again :)
OK, had a few days with no problems, had a bsod today. Froze up at 'verifying dmi pool data' a few times before it rebooted.
https://www.dropbox.com/sh/hz8c8erdvttj13c/fbhenjW-Ts
let me know if you need any more info, thanks again :)
Alright I looked through your new file, and low and behold it picked up information that was not int the other ones (as expected)
So it looks like your Network drivers are failing and causing the BSOD:
Driver Reference Table - Xeno7x64.sysCode:fffff880`02ffa378 fffff880`02de8e43*** ERROR: Module load completed but symbols could not be loaded for Xeno7x64.sys Xeno7x64+0x15e43 fffff880`02ffa0f8 fffff880`05870926*** ERROR: Module load completed but symbols could not be loaded for Edge7x64.sys Edge7x64+0x292
Driver Reference Table - Edge7x64.sys
As you can see from the time stamps they are outdated and should probably be updated:
Code:kd> lmvm Xeno7x64 start end module name fffff880`02dd3000 fffff880`02dfc000 Xeno7x64 (no symbols) Loaded symbol image file: Xeno7x64.sys Image path: \SystemRoot\system32\DRIVERS\Xeno7x64.sys Image name: Xeno7x64.sys Timestamp: Wed May 18 18:55:16 2011 (4DD44E54) CheckSum: 0002E73E ImageSize: 00029000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4Please update the drivers from here: Killer Gaming :: Support :: Driver DownloadsCode:kd> lmvm Edge7x64 start end module name fffff880`0586e000 fffff880`05879000 Edge7x64 (no symbols) Loaded symbol image file: Edge7x64.sys Image path: \SystemRoot\system32\DRIVERS\Edge7x64.sys Image name: Edge7x64.sys Timestamp: Wed May 18 18:55:15 2011 (4DD44E53) CheckSum: 0000DDBE ImageSize: 0000B000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
OK, I updated the drivers! When i restarted my system to complete the update, the screen didn't get past the 'verifying dmi pool data' the first few times. I put the windows 7 cd in and it gave me the usual 5 seconds to decide if i wanted to boot from disk, which I ignored, then it boots up OK. If there inst a cd/dvd in it wont boot up, even though I don't boot up using the cd. Seems a remnant from the last BSOD, or that's when it first happened.
Thanks for your help :)
Check your BIOS to see if there is an option to choose the boot device order and make sure the cd/dvd drive is below the hard drive.
https://www.dropbox.com/sh/hz8c8erdvttj13c/fbhenjW-Ts
had another bsod earlier, shortly after booting up, while browsing the web.
had another bsod, seems to be getting worse I think dropbox isn't syncing the files either)