Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD, the error code is a. Windows 7 Ultimate SP1

29 Jun 2013   #1
Easy190E

Windows 7 Ultimate x64
 
 
BSOD, the error code is a. Windows 7 Ultimate SP1

Hello, I have a bsod. It happened while performing a defrag with Piriform Defraggler.

Windows error information:

BCCode a
BCP1 000000000000000E
BCP2 0000000000000002
BCP3 0000000000000001
BCP4 FFFFF800032E05A9
OS Version 6.1.7601
Service Pack 1.0
Product 256.1

I have included my system dump files.

your help will be greatly appreciated.


My System SpecsSystem Spec
.
30 Jun 2013   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Before proceeding, I want to ask you a question ... is RAID anything must for you?

Till now, some network error is detected, and there is some hint of hardware failure. That is why I am asking it.
My System SpecsSystem Spec
30 Jun 2013   #3
Easy190E

Windows 7 Ultimate x64
 
 

RAID isn't critical for me, but it would be inconvenient to split all my data between two drives at this time.
My System SpecsSystem Spec
.

30 Jun 2013   #4
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Intel(R) Advanced Network Services Virtual Adapter is failing here.
Code:
fffff880`0385a858  fffff880`07c42dabUnable to load image iansw60e.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iansw60e.sys
*** ERROR: Module load completed but symbols could not be loaded for iansw60e.sys
 iansw60e+0x6dab
Try to update it from http://www.intel.in/content/www/in/en/homepage.html or if possible, disable it.

Realtek PCIe GBE Family Controller is failing, too.
Code:
fffff880`0385a338  fffff880`07f6967cUnable to load image Rt64win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
 Rt64win7+0x1d67c
Update it from Realtek

But a BugCheck 9C is a hardware error. So it is do some hardware checks, too.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Stress test the CPU.
Hardware - Stress Test With Prime95

Do some Disc checks.
  1. Update your SSD's Firmware
  2. Re-seat the sata and power.
  3. Run chkdsk /f/r, following the option two of the tutorial Disk Check
  4. Seatool for dos: SeaTools | Seagate download
    Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests", then select "Long Test" and let it run.
Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy.

Let us know the results.
___________________________________________________________________________________
BSOD ANALYSIS:
Code:
.....
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {e, 2, 1, fffff800032e05a9}

Probably caused by : win32k.sys ( win32k!RawInputThread+6ed )

Followup: MachineOwner
---------

10: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 000000000000000e, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
    bit 0 : value 0 = read operation, 1 = write operation
    bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff800032e05a9, address which referenced memory

Debugging Details:
------------------


WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80003511100
GetUlongFromAddress: unable to read from fffff800035111c0
 000000000000000e Nonpaged pool

CURRENT_IRQL:  2

FAULTING_IP: 
nt!KiSearchForNewThread+1b9
fffff800`032e05a9 49895008        mov     qword ptr [r8+8],rdx

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

BUGCHECK_STR:  0xA

PROCESS_NAME:  csrss.exe

TRAP_FRAME:  fffff8800b774460 -- (.trap 0xfffff8800b774460)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa8038b4d980 rbx=0000000000000000 rcx=0000000000000009
rdx=fffffa8038b4d988 rsi=0000000000000000 rdi=0000000000000000
rip=fffff800032e05a9 rsp=fffff8800b7745f0 rbp=0000000000000001
 r8=0000000000000006  r9=0000000000000000 r10=0000000000000004
r11=fffffa8038b45ba0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz ac po nc
nt!KiSearchForNewThread+0x1b9:
fffff800`032e05a9 49895008        mov     qword ptr [r8+8],rdx ds:00000000`0000000e=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff800032d91a9 to fffff800032d9c00

STACK_TEXT:  
fffff880`0b774318 fffff800`032d91a9 : 00000000`0000000a 00000000`0000000e 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`0b774320 fffff800`032d7e20 : 00000000`00000000 00000000`00000000 00000000`00000000 fffffa80`38b4d8e0 : nt!KiBugCheckDispatch+0x69
fffff880`0b774460 fffff800`032e05a9 : 00000000`0000000a 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x260
fffff880`0b7745f0 fffff800`032cf5bc : 00000000`00000000 fffffa80`38b4d980 00000000`00000000 00000000`00000009 : nt!KiSearchForNewThread+0x1b9
fffff880`0b774660 fffff800`032dc0da : fffffa80`38b4d980 fffff800`032dcaf2 fffff880`00000000 fffffa80`38b1bb50 : nt!KiCommitThreadWait+0x17c
fffff880`0b7746f0 fffff960`000d56a9 : 00000000`00000004 fffffa80`388f2900 00000000`00000001 00000000`0000000d : nt!KeWaitForMultipleObjects+0x272
fffff880`0b7749b0 fffff960`000651b8 : fffffa80`0000007b 00000000`0000000f fffff880`00000001 ffffffff`80000338 : win32k!RawInputThread+0x6ed
fffff880`0b774a80 fffff960`000e629a : fffffa80`00000002 fffff880`0b759e00 00000000`00000020 00000000`00000000 : win32k!xxxCreateSystemThreads+0x58
fffff880`0b774ab0 fffff800`032d8e93 : fffffa80`38b4d980 00000000`00000004 000007ff`fffd3000 00000000`00000000 : win32k!NtUserCallNoParam+0x36
fffff880`0b774ae0 000007fe`fd681eea : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`000cfd28 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x000007fe`fd681eea


STACK_COMMAND:  kb

FOLLOWUP_IP: 
win32k!RawInputThread+6ed
fffff960`000d56a9 8bf8            mov     edi,eax

SYMBOL_STACK_INDEX:  6

SYMBOL_NAME:  win32k!RawInputThread+6ed

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: win32k

IMAGE_NAME:  win32k.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  5164dccb

FAILURE_BUCKET_ID:  X64_0xA_win32k!RawInputThread+6ed

BUCKET_ID:  X64_0xA_win32k!RawInputThread+6ed

Followup: MachineOwner
---------
Code:
.....
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9C, {0, fffff880009d7d70, 0, 0}

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner
---------

4: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

MACHINE_CHECK_EXCEPTION (9c)
A fatal Machine Check Exception has occurred.
KeBugCheckEx parameters;
    x86 Processors
        If the processor has ONLY MCE feature available (For example Intel
        Pentium), the parameters are:
        1 - Low  32 bits of P5_MC_TYPE MSR
        2 - Address of MCA_EXCEPTION structure
        3 - High 32 bits of P5_MC_ADDR MSR
        4 - Low  32 bits of P5_MC_ADDR MSR
        If the processor also has MCA feature available (For example Intel
        Pentium Pro), the parameters are:
        1 - Bank number
        2 - Address of MCA_EXCEPTION structure
        3 - High 32 bits of MCi_STATUS MSR for the MCA bank that had the error
        4 - Low  32 bits of MCi_STATUS MSR for the MCA bank that had the error
    IA64 Processors
        1 - Bugcheck Type
            1 - MCA_ASSERT
            2 - MCA_GET_STATEINFO
                SAL returned an error for SAL_GET_STATEINFO while processing MCA.
            3 - MCA_CLEAR_STATEINFO
                SAL returned an error for SAL_CLEAR_STATEINFO while processing MCA.
            4 - MCA_FATAL
                FW reported a fatal MCA.
            5 - MCA_NONFATAL
                SAL reported a recoverable MCA and we don't support currently
                support recovery or SAL generated an MCA and then couldn't
                produce an error record.
            0xB - INIT_ASSERT
            0xC - INIT_GET_STATEINFO
                  SAL returned an error for SAL_GET_STATEINFO while processing INIT event.
            0xD - INIT_CLEAR_STATEINFO
                  SAL returned an error for SAL_CLEAR_STATEINFO while processing INIT event.
            0xE - INIT_FATAL
                  Not used.
        2 - Address of log
        3 - Size of log
        4 - Error code in the case of x_GET_STATEINFO or x_CLEAR_STATEINFO
    AMD64 Processors
        1 - Bank number
        2 - Address of MCA_EXCEPTION structure
        3 - High 32 bits of MCi_STATUS MSR for the MCA bank that had the error
        4 - Low  32 bits of MCi_STATUS MSR for the MCA bank that had the error
Arguments:
Arg1: 0000000000000000
Arg2: fffff880009d7d70
Arg3: 0000000000000000
Arg4: 0000000000000000

Debugging Details:
------------------


BUGCHECK_STR:  0x9C_GenuineIntel

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

PROCESS_NAME:  System

CURRENT_IRQL:  f

LAST_CONTROL_TRANSFER:  from 0000000000000000 to fffff800032ddc00

STACK_TEXT:  
fffff880`009d7d38 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KeBugCheckEx


STACK_COMMAND:  kb

SYMBOL_NAME:  ANALYSIS_INCONCLUSIVE

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: Unknown_Module

IMAGE_NAME:  Unknown_Image

DEBUG_FLR_IMAGE_TIMESTAMP:  0

BUCKET_ID:  ZEROED_STACK

Followup: MachineOwner
---------
My System SpecsSystem Spec
23 Jul 2013   #5
Easy190E

Windows 7 Ultimate x64
 
 

Sorry for taking so long to get back to this. I'm in the process of getting ready to move.
Anyway, I have changed out one of my RAID drives which had an uncorrectable error. I also reseated all my sata connections. For the Intel(R) Advanced Network Services Virtual Adapter failing, I have the latest driver from Intel and I haven't seen any trouble from that at all. So, I have no idea why that's showing a failure.

For the Realtek PCIe GBE Family Controller failing, I saw that there was an exclamation icon on the PCI communications controller. It didn't seem to be causing me any trouble so I just disabled it.

I did Memtest86+ and Prime95 stress tests and didn't have any more BSOD's. My computer has been running without problems for a couple of weeks now.
My System SpecsSystem Spec
23 Jul 2013   #6
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Good to know

For any further issue, let us know.
My System SpecsSystem Spec
Reply

 BSOD, the error code is a. Windows 7 Ultimate SP1




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Trouble installing Windows 7 Ultimate 64 Bit. Error code: 0x0000100
Hey, new to these forums. My laptop is having some crashing issues which I believe is due to a faulty installation of my current Windows 7. I want to re install it with Windows 7 Ultimate as a clean install. When I go to start up the installation and choose to receive updates, I get the error:...
General Discussion
Win 7 SP1 Ultimate x64 Windows Update Fails, error code 8007370B
For 2 weeks now, I have been completely unable to get Windows Update to run properly on my Windows 7 SP1 Ultimate x64 computer. I have no idea what I did to cause this and I've done some limited troubleshooting to no avail. I would really appreciate any assistance you could offer. Per the...
Windows Updates & Activation
Windows 7 Ultimate 32bit error code 8007370B
Hi I get the error 8007370B when I try to use windows update and could really use some help please. I've had this error since first installation of windows and also after reinstalling windows. I have also ran the System Update Readiness Tool. Ryan
Windows Updates & Activation
Windows 7 Ultimate 32-bit Error Code 800F081F
Everytime I install the newer Update of Windows Update this appears, i can't install any updates :\
Windows Updates & Activation
Windows 7 64 bit Ultimate Update Error code 0x8007370b
Hello. For almost the last year now, I have been unable to run windows updates on my computer. I am running Windows 7 Ultimate 64bit SP1. Running the update yields the error code 0x8007370b. I have searched the Internet, ran the Microsoft Fix It tool, and gone thru the Windows Trouble...
Windows Updates & Activation
Windows 7 ultimate 64 bit error code 8000ffff
Hi experts Recently I realized that there 32 updates are pending and I can get them to be installed on windows 7 ultimate 64-bit. http://i46.tinypic.com/15npsh2.jpg http://i46.tinypic.com/15npsh2.jpg I tried many online suggestions but still no joy.
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:27.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App