Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: multiple BSOD all pointing towards ntkrnlmp.exe

04 Jul 2013   #21
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

That's good. Do some Disc checks on the other HDD.
  1. Re-seat the sata and power for both the HDD and SSD).
  2. Run chkdsk /f/r, following the option two of the tutorial Disk Check
  3. Seatool for dos: SeaTools | Seagate download
    Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests", then select "Long Test" and let it run.
  4. Post a screenshot of both the HDD and SSD using CrystalDiskInfo - Software - Crystal Dew World.
How old the motherboard is, by the way? I guess it is not very old?


My System SpecsSystem Spec
.
05 Jul 2013   #22
plasma gel

windows 7 professional x64
 
 

alright ive done everything you asked so so far, in the rar file attached is the screen shots, the HDD i reused from my old computer that's why its been used so much. and for the mother board do you mean like since it came out? im going to guess 2013/05/24 (in the downloads page on the website, that's the date for when the manual was released)
My System SpecsSystem Spec
06 Jul 2013   #23
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hdds are seeming to be good, apparently. All the failures are not expressed in CrystalDiscInfo though.

Disc failure is continuing here.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F4, {3, fffffa800ecd19e0, fffffa800ecd1cc0, fffff800037d6350}

----- ETW minidump data unavailable-----
Probably caused by : wininit.exe

Followup: MachineOwner
---------
In this situation, I'd like to see some more info.
upload your MSINFO32.nfo file.
  1. Click on the start button
  2. Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
  3. File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
  4. Give the time for processing, it will save a .nfo file on your desktop.
  5. Zip it, and upload it following the instruction.
Download and install CCleaner. Then run it.
Go to "Tools" .... by default it will open the "uninstall" tab.
Click on save as text file. Save it on your desktop.
Upload the text file for us.


Realtek WiFi driver is also participation in the issue.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {20, 2, 0, fffff88005b08dc3}

*** WARNING: Unable to verify timestamp for rtl8192Ce.sys
*** ERROR: Module load completed but symbols could not be loaded for rtl8192Ce.sys
Probably caused by : rtl8192Ce.sys ( rtl8192Ce+b3dc3 )

Followup: MachineOwner
---------
And the driver is old enough.
Code:
fffff880`05a55000 fffff880`05bc0000   rtl8192Ce T (no symbols)           
    Loaded symbol image file: rtl8192Ce.sys
    Image path: rtl8192Ce.sys
    Image name: rtl8192Ce.sys
    Timestamp:        Fri Dec 03 16:26:21 2010 (4CF8CCD5)
    CheckSum:         00118EED
    ImageSize:        0016B000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from Realtek

Let us know the results.
My System SpecsSystem Spec
.

06 Jul 2013   #24
plasma gel

windows 7 professional x64
 
 

well, i updated the ralink driver, but it was just continuous blue screens about 5 seconds after i logged in so i went to an old save. im starting to think maybe just format the drive and re install windows at this point. the blue screens are starting to get worse also, every coupleof minutes or so, windows task manager will cras; the task bar and icons on the desktop will disapear then about 10 seconds later it blue screens. i uploaded the stuff you asked for in the rar
My System SpecsSystem Spec
06 Jul 2013   #25
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

It is predominantly stop 0xf4's ....

Scan the system for possible virus infection with the following programs.
Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
My System SpecsSystem Spec
08 Jul 2013   #26
plasma gel

windows 7 professional x64
 
 

alright, i ran both of those. the antirootkit found 7 things, i deleted them all. then the windows defender didnt find anything after a full search. also i ran memtest for around 12 hours and got 13 passes.

i have had one or two blue screens today, but i managed to go around 5 hours since the last one. which compared to the 5 minutes per blue screen feels pretty darn great.

now im not sure if its fixed yet or not, only time will tell. but thank you so much for helping me through all this
My System SpecsSystem Spec
09 Jul 2013   #27
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

The latest BSODs are stop 0xf4, too. And it appears that you havent informed us properly about the results of the tests. What was the result of memtest?

Have you performed the seatools test as suggested earlier in post #21? What was the result?
My System SpecsSystem Spec
Reply

 multiple BSOD all pointing towards ntkrnlmp.exe




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Multiple BSODs pointing to many diferent drivers
Hi, this post is about the same machine described in http://www.sevenforums.com/bsod-help-support/337280-translating-memory-adresses-windbg-output.html , but I started a new thread since the title doesn't reflect my actual concerte, please forgive me. Until now, many diferent BSODs appeared at my...
BSOD Help and Support
Multiple BSOD ntkrnlmp.exe - requesting assistance
I keep getting crashes on windows. Please check error below and the dumps in the attachement. I would be so grateful for assistance before my computer blows up in my face. Thank you. Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 Locale ID: ...
BSOD Help and Support
Recent Multiple BSOD's. CI.DLL, Memory Corruption, NTKRNLMP.EXE
Over the course of the last few months, I have been getting random BSOD's and crash's. I leave my PC on 24/7 and most of the time it runs great once it finally gets booted. A few times recently, I'll leave it at the desktop overnight and come back the next day to find a BSOD. At some points it...
BSOD Help and Support
Monthly BSOD pointing to ntoskrnl.exe
Every month or so it seems that a BSOD ups and grabs me. I have used BlueScreenView to try to get some idea of what is going on. It seems to indicate that ntoskrnl.exe is the main offender, but I am unsure what to do to correct the problem. I have uploaded a zip file per instructions named...
BSOD Help and Support
BSOD multiple times. Caused by ntkrnlmp.exe.
Hi everyone, I've had the BSOD 5 or 6 times today and I'm at a lost on how to fix it. I've run the diagnostics and there's apparently nothing wrong. I've run a virus scan with Malwarebytes and nothing. I've tried to do a system restore however my system protection was turned off and so there...
BSOD Help and Support
BSOD few minutes after I run uTorrent, also pointing to vmware
Hi. Few weeks ago I started getting BSODs. I've never had them before. I did not install any new hardware. The only updates that I recall were VMWare Client and regular Windows updates. After I run uTorrent I get BSOD pointing to NETIO.sys. I tried everything, I even re-installed Windows. ...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:04.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App