Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: PFN_List BSOD less than 24hours after fresh install


05 Jul 2013   #1

Windows 7 Ultimate x64
 
 
PFN_List BSOD less than 24hours after fresh install

Okay computer BSOD less than 24 hours after installing Windows 7 Ultimate 64bit

SF BSOD Tool Zip attached and the small DMP File

On Rebuilt Dell XPS 730

here is Speccy
Summary
Operating System
Windows 7 Ultimate 64-bit SP1
CPU
Intel Core 2 Duo E8200 @ 2.66GHz 45 C
Wolfdale 45nm Technology
RAM
4.00GB Dual-Channel DDR3 @ 666MHz (9-9-9-24)
Motherboard
Dell Inc. 0UU795 (Socket 775) 25 C
Graphics
SAMSUNG (1920x1080@59Hz)
Generic Non-PnP Monitor (1280x1024@60Hz)
512MB ATI Radeon HD 3870 X2 (Dell) 55C
512MB ATI Radeon HD 3870 X2 (Dell) 46 C
CrossFire Disabled
Hard Drives
233GB SAMSUNG HD251HJ SCSI Disk Device (SATA) 34 C
699GB Western Digital WDC WD75 00AYPS-01ZKB SCSI Disk Device (SATA) 39 C
Optical Drives
Optiarc DVD RW AD-7261S SCSI CdRom Device
Audio
Sound Blaster X-Fi Xtreme Audio (Vista)

and a 1kW PSU

Here is the DMP File in a ZIP

Devices I have plugged in are a;
PCIe
Graphics
Sound Card
PCI
Peak Hardware Dual Tunner Card
and Extra USB/Firewire Ports (Plug and Play no drivers included)

Please help
I had 4 months of hell before and I am not doing it again!

1 Could it be the windows installion disk not having all the data
2 is it hard Drive? No I did a full sector check and I/O check and all passed on both HDD
3 RAM i don't know i did memtest86 and it passed a 8 hour check (overnight) Now I have to havve the Voltage set to 1,8 other wise the computer seizes up before i even get to log in, it's Kingston ValueRAM
4 ME? I only installed windows SP1 from disk (offline install as I use my mobile phone as my ISP (unlimited Tethering) (speeds of 1.8MB/s )

Thank you

My System SpecsSystem Spec
.

05 Jul 2013   #2

Desk1 8 Pro / Desk2 7 Home Prem / Laptop 8.1 Pro all 64bit
 
 

Hello and welcome mush for starters mate how old is the gear as I see you have rebuilt it?

First port of call is the PSU http://www.sevenforums.com/vip/257690-psu-how-test.html#post2130086 - please be very careful
My System SpecsSystem Spec
06 Jul 2013   #3

Windows 7 Ultimate x64
 
 

THat link says I am not allowed either because not got a sufficient account or page has been removed. PSU is the Dell Alienware Area 51 PSU

Graphics 2008, TV Card 2010, Soundcard 2012, RAM 2011, CPU was Secondhand it reads (IntelRTM '06)

It crashed again during night! and Graphics card keeps failing (screen flickers and then the card says it's recovered, last time that was caused by bad driver (I got the latest CCC)
My System SpecsSystem Spec
.


06 Jul 2013   #4

Desk1 8 Pro / Desk2 7 Home Prem / Laptop 8.1 Pro all 64bit
 
 

Probably because of the low post count but try this one PSU - Jump Start

if this one doesn't work I will ask if I can copy paste the other one as it is better and well I think you need to look at the PSU.
My System SpecsSystem Spec
06 Jul 2013   #5

Windows 7 Ultimate x64
 
 

Im not doing that! how stupid! and dangerous! I have electrocuted my self before messing with PSU and Vintage TV Tubes! not doing it again sorry! it doesn't even say what to do after then! either so I am s'posed to turn it on with out motherboard then what? make sure it all powers up, well yes it does te only one that doesn't is a hard drive because it's not plugged in!

sorry, I just want to knwo what caused the BSOD!!
My System SpecsSystem Spec
06 Jul 2013   #6
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Electrocuted? That means death.
I'll ask a BSOD teamer to look at your dumps.
My System SpecsSystem Spec
06 Jul 2013   #7

Windows 7 Ultimate x64
 
 

I lost feeling in arm for a week! low amp high volts (32mA) not as bad as tazer lol! still numb at times.

and thank you
My System SpecsSystem Spec
06 Jul 2013   #8

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Configure dumps
First, we want to make sure the computer is saving your dump files. Go to Control Panel -> System -> Advanced System Settings -> Startup and Recovery [Settings] Make sure that "Write Debugging Information" is set to Small Memory Dump (256kb) if it is not already. Dump Files - Configure Windows to Create on BSOD

Next, make sure that the folder C:\Windows\Minidump exists. If not, create it (allow permission if asked). Make sure any dumps you want to analyze, whether yours or others', are in this folder. You can ZIP/RAR the files and send them to someone else to analyze as well.
My System SpecsSystem Spec
06 Jul 2013   #9

Windows 7 Ultimate x64
 
 

I already have it set up that way, and I just got a memory Management BSOD!

SO now starts the long problems on BSOD every 10-12 hours

Could it be I am running Windows 7 on a non compatible PC? Would Downgrading to XP (i knwo i will lose 64bit) make it work better?
My System SpecsSystem Spec
06 Jul 2013   #10
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Display driver is causing some issues here.
Code:
fffff880`091c6698  fffff880`04adc703Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
 atikmdag+0xb0703
And it is old.
Code:
fffff880`04a2c000 fffff880`055df000   atikmdag T (no symbols)           
    Loaded symbol image file: atikmdag.sys
    Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
    Image name: atikmdag.sys
    Timestamp:        Sat Nov 17 01:48:02 2012 (50A69F7A)
    CheckSum:         00B65E3C
    ImageSize:        00BB3000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update your ATI/AMD display driver.
You can get it from the link in our forum, Latest AMD Catalyst Video Driver for Windows 7, or you may go to AMD Graphics Driver and Software and opt for Automatically Detect and Install the appropriate driver for your card.


During installation, you may opt for advanced installation, and install the display driver only, not the Catalyst Control Center.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy.
My System SpecsSystem Spec
Reply

 PFN_List BSOD less than 24hours after fresh install




Thread Tools



Similar help and support threads for2: PFN_List BSOD less than 24hours after fresh install
Thread Forum
BSOD's PFN_list, Power_Management, Memory_Management. BSOD Help and Support
BSOD playing Guild Wars 2, recent SSD install and fresh install of W7 BSOD Help and Support
Solved BSOD on fresh install when install updates, misc error codes BSOD Help and Support
pfn_list corrupt BSOD BSOD Help and Support
BSOD - STOP: 0x000000004e, PFN_list corrupt BSOD Help and Support
BSoD install windows7 professional 32bit PFN_List error BSOD Help and Support
Random BSOD - Fresh install, fresh system BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:03 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33