Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: bsod says failure system

11 Jul 2013   #1
viid

win 7 pro 64
 
 
bsod says failure system

I am experiencing BSOD on win 7 pro

sometimes computer just crashes with no BSOD.

this seems to happen a lot when flash is running, and the audio gets stuck and sounds like lawnmower man, sometimes mouse freezes sometimes, computer freezes but mouse still moves, sometimes display driver fails and restarts, and sometimes BSOD.
I usually get this bugcheck The computer has rebooted from a bugcheck. The bugcheck was: 0x00000101 (0x0000000000000019, 0x0000000000000000, 0xfffff88003967180, 0x0000000000000007). A dump was saved in: C:\Windows\Minidump\072713-16458-01.dmp. Report Id: 072713-16458-01.
I have edited this post.


My System SpecsSystem Spec
.

11 Jul 2013   #2
x BlueRobot

 

My System SpecsSystem Spec
11 Jul 2013   #3
viid

win 7 pro 64
 
 

it looks like it stopped crashing if it starts up again i will create a new thread
My System SpecsSystem Spec
.


12 Jul 2013   #4
x BlueRobot

 

Okay, just post it back here instead though.
My System SpecsSystem Spec
27 Jul 2013   #5
viid

win 7 pro 64
 
 

I have edited this post
My System SpecsSystem Spec
27 Jul 2013   #6
x BlueRobot

 

Code:
BugCheck 101, {19, 0, fffff88003967180, 7}

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
Code:
Usual causes:  Device driver, BIOS bug, hardware defect
Code:
0: kd> !ipi
IPI State for Processor 0

As a sender, awaiting IPI completion from Unable to determine PRCB address for processor 1. <-- Hung Processor?
Unable to determine PRCB address for processor 2.
Unable to determine PRCB address for processor 3.
Unable to determine PRCB address for processor 4.
Unable to determine PRCB address for processor 5.
Unable to determine PRCB address for processor 6.
Unable to determine PRCB address for processor 7.
1 other processor(null).

    TargetCount          1  PacketBarrier        1  IpiFrozen     0 [Running]
--------------------------------------------------------------------------------

Due to the nature of this crash, we will need to obtain a Kernel Memory dump for through analysis, please configure for a Kernel Memory dump to be saved upon the event of a BSOD, and then navigate to the following directory:

Code:
C:\Windows\MEMORY.DMP or %systemroot%\MEMORY.DMP
Place the file into a zipped folder and then upload to a file sharing site such as Skydrive or Dropbox. Both are completely free and easy to use; with Skydrive place the file into the Public folder (I'm not sure about Dropbox), and the post the URL to the file.In the meantime, check for a possible BIOS update:

Code:
0: kd> !sysinfo machineid
Machine ID Information [From Smbios 2.4, DMIVersion 36, Size=1268]
BiosVendor = Award Software International, Inc.
BiosVersion = FH
BiosReleaseDate = 01/06/2012
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = X58A-UD3R
SystemFamily =  
SystemVersion =  
SystemSKU =  
BaseBoardManufacturer = Gigabyte Technology Co., Ltd.
BaseBoardProduct = X58A-UD3R
BaseBoardVersion =
Code:
0: kd> !sysinfo cpuspeed
CPUID:        "Intel(R) Core(TM) i7 CPU         960  @ 3.20GHz"
MaxSpeed:     3200
CurrentSpeed: 3840
Please also stop overclocking your CPU, and any other hardware such as the RAM and GPU, by resetting the BIOS back to it's factory defaults - How To Clear CMOS (Reset BIOS)

Remove:

Code:
Start Menu\Programs\Kaspersky Internet Security 2013
Kaspersky Internet Security is known to cause BSODs, please remove the program completely with Kaspersky Removal Tool, and then install and full scans with these free and proven alternatives, which work best with the operating system as a result of their compatibility and lightweight nature on system resources.

Install and perform full scans with:
information   Information
Remember to install the free version of Malwarebytes not the free trail; untick the free trial box during installation. MSE is the most lightweight and compatible with the Windows 7 operating system

You can also view this thread for a complete free and lightweight security protection combination:
My System SpecsSystem Spec
27 Jul 2013   #7
viid

win 7 pro 64
 
 

thanks for taking a look
My System SpecsSystem Spec
28 Jul 2013   #8
x BlueRobot

 

Welcome, please update with your results when your finished
My System SpecsSystem Spec
Reply

 bsod says failure system




Thread Tools





Similar help and support threads
Thread Forum
BSOD Power Driver State Failure After System Resume
Hi, I had this problem a while back but it went away by itself (and me making sure all drivers, etc were up to date). However, it is now back and I'm at a loss as to the cause. Essentially, after I resume my laptop after sleep/hibernation then it works for 5-10 minutes and then I get the...
BSOD Help and Support
System Exception Error, sometimes Freezes ,BSOD and failure to powerup
Had these problem recently, a day after i bought my razer mamba and installed the drivers,was wondering if it is the root cause. Thanks in advance for helping. Windows 7 Home Premium 64bit i5-2500 3.30GHz 4GB Ram nVIDIA GT 440
BSOD Help and Support
BSOD System Service Exception/Driver Power State Failure
I kept getting a BSOD with System Service Exception. I tried to reinstall my video card driver and afterwards received Driver Power State Failure. Really appreciate any help anybody can give me. Thanks for any help!
BSOD Help and Support
System Failure
Hi. All of a sudden my computer after 1 hour freezes and crashes completely. I get a black screen of death with error code 0xc000000e Recovery Screen After i hit enter i got another message saying Your PC needs to be repaired. The application or operting system couldnt be loaded because a...
BSOD Help and Support
BSOD "System Power Device Failure"
I'm running a few days old HP Pavilion dv6-6047cl laptop with the original OEM version of Windows 7 Home Premium x64. I brought the laptop with me walking from my apartment to college (about 10-15min) and when I arrived I found I had a blue screen about System Device Power Failure. Over the past...
BSOD Help and Support
BSOD: Power Management System Failure
Is Windows 7 . . . - x86 (32-bit) or x64 ? x64 - the original installed OS on the system? NO - an OEM or full retail version? Promotional Upgrade - equivalent to Full Retail - OEM = came pre-installed on system - Full Retail = you purchased it from retailer - What is the age of system...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:46.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App