Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 0x0000003D BSOD - Windows 7 can't even login - Help?

12 Jul 2013   #11
FlyingLotus

Windows 7 Home Premium 64 Bit
 
 

Here's my DMP in txt format -

071113-7940-01.dmp 11/07/2013 20:54:01 INTERRUPT_EXCEPTION_NOT_HANDLED 0x0000003d fffff880`0af994e0 00000000`00000000 00000000`00000000 fffff880`0103178e mv91xx.sys mv91xx.sys+3178e x64 ntoskrnl.exe+75c00 C:\Windows\Minidump\071113-7940-01.dmp 8 15 7601 276,720 11/07/2013 20:55:22


My System SpecsSystem Spec
.
13 Jul 2013   #12
FlyingLotus

Windows 7 Home Premium 64 Bit
 
 

now I can't even boot into safe mode without getting the BSOD! Can anyone help me out here?
My System SpecsSystem Spec
13 Jul 2013   #13
x BlueRobot

 

BSOD Analysis:

Code:
BugCheck 3D, {fffff8800af994e0, 0, 0, fffff8800103178e}

*** WARNING: Unable to verify timestamp for mv91xx.sys
*** ERROR: Module load completed but symbols could not be loaded for mv91xx.sys
Probably caused by : mv91xx.sys ( mv91xx+3178e )
Okay, from my understanding, it seems that a device interrupt was issued, but wasn't able to handled, since the nature of the IRQ didn't have a corresponding ISR within the IDT table for the processor.

Code:
0: kd> !prcb
PRCB for Processor 0 at fffff780ffff0000:
Current IRQL -- 11
Threads--  Current fffffa8006c67510 Next 0000000000000000 Idle fffff80003866cc0
Processor Index 0 Number (0, 0) GroupSetMember 1
Interrupt Count -- 00e03fd3
Times -- Dpc    0000203c Interrupt 00000f93 
         Kernel 0002fde3 User      0000685b
Code:
0: kd> lmvm mv91xx
start             end                 module name
fffff880`01000000 fffff880`0108c000   mv91xx   T (no symbols)           
    Loaded symbol image file: mv91xx.sys
    Image path: \SystemRoot\system32\DRIVERS\mv91xx.sys
    Image name: mv91xx.sys
    Timestamp:        Fri Aug 27 10:49:22 2010 (4C778A22)
    CheckSum:         00050BB0
    ImageSize:        0008C000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
mv91xx.sys belongs to your Marvell MV91xx AHCI/RAID driver, and since you have updated the driver, then it may be best to begin testing the hard drive.

Code:
0: kd> kv
Child-SP          RetAddr           : Args to Child                                                           : Call Site
fffff880`0af98c28 fffff800`036dd1a9 : 00000000`0000003d fffff880`0af994e0 00000000`00000000 00000000`00000000 : nt!KeBugCheckEx
fffff880`0af98c30 fffff800`036d9509 : 00000000`00000000 00000000`00000000 fffff880`0af994e0 fffff800`03708a90 : nt!KiBugCheckDispatch+0x69
fffff880`0af98d70 fffff800`0370875d : fffff800`038eb978 fffff800`0382ce18 fffff800`03668000 fffff880`0af99c88 : nt!KiInterruptHandler+0x29
fffff880`0af98da0 fffff800`03707535 : fffff800`0382ce10 fffff880`0af98e18 fffff880`0af99c88 fffff800`03668000 : nt!RtlpExecuteHandlerForException+0xd
fffff880`0af98dd0 fffff800`037184d1 : fffff880`0af99c88 fffff880`0af994e0 fffff880`00000000 fffffa80`07c0e4e8 : nt!RtlDispatchException+0x415
fffff880`0af994b0 fffff800`036dd282 : fffff880`0af99c88 fffffa80`07bfdb60 fffff880`0af99d30 00000000`00000000 : nt!KiDispatchException+0x135
fffff880`0af99b50 fffff800`036db0b4 : 00000000`00000000 fffff880`01be2bb8 00000000`00000000 fffff880`01be2b70 : nt!KiExceptionDispatch+0xc2
fffff880`0af99d30 fffff880`0103178f : fffffa80`07823008 00000000`00000000 fffffa80`077d5060 fffff880`039fb100 : nt!KiBreakpointTrap+0xf4 (TrapFrame @ fffff880`0af99d30)
fffff880`0af99ec0 fffffa80`07823008 : 00000000`00000000 fffffa80`077d5060 fffff880`039fb100 fffffa80`07c0e4e8 : mv91xx+0x3178f
fffff880`0af99ec8 00000000`00000000 : fffffa80`077d5060 fffff880`039fb100 fffffa80`07c0e4e8 fffffa80`07c0a2b0 : 0xfffffa80`07823008
--------------------------------------------------------------------------

Run some hard-drive diagnostics and follow these steps:Find your hard-drive manufacturer and run their tests.

Additional Tests:Post a screenshot of Crystal Disk Info summary:
Quote   Quote: Originally Posted by writhziden
If you have an SSD, make sure the following are up to date:
  • SSD firmware
  • BIOS Version
  • Chipset Drivers
  • Hard disk controller drivers/SATA drivers
  • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.
Check for any file system errors and bad sectors using Option #2 of:Use this command with Disk Check:

Code:
chkdsk C: /f /r
My System SpecsSystem Spec
.

13 Jul 2013   #14
FlyingLotus

Windows 7 Home Premium 64 Bit
 
 

Quote   Quote: Originally Posted by x BlueRobot View Post
BSOD Analysis:

Code:
BugCheck 3D, {fffff8800af994e0, 0, 0, fffff8800103178e}

*** WARNING: Unable to verify timestamp for mv91xx.sys
*** ERROR: Module load completed but symbols could not be loaded for mv91xx.sys
Probably caused by : mv91xx.sys ( mv91xx+3178e )
Okay, from my understanding, it seems that a device interrupt was issued, but wasn't able to handled, since the nature of the IRQ didn't have a corresponding ISR within the IDT table for the processor.

Code:
0: kd> !prcb
PRCB for Processor 0 at fffff780ffff0000:
Current IRQL -- 11
Threads--  Current fffffa8006c67510 Next 0000000000000000 Idle fffff80003866cc0
Processor Index 0 Number (0, 0) GroupSetMember 1
Interrupt Count -- 00e03fd3
Times -- Dpc    0000203c Interrupt 00000f93 
         Kernel 0002fde3 User      0000685b
Code:
0: kd> lmvm mv91xx
start             end                 module name
fffff880`01000000 fffff880`0108c000   mv91xx   T (no symbols)           
    Loaded symbol image file: mv91xx.sys
    Image path: \SystemRoot\system32\DRIVERS\mv91xx.sys
    Image name: mv91xx.sys
    Timestamp:        Fri Aug 27 10:49:22 2010 (4C778A22)
    CheckSum:         00050BB0
    ImageSize:        0008C000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
mv91xx.sys belongs to your Marvell MV91xx AHCI/RAID driver, and since you have updated the driver, then it may be best to begin testing the hard drive.

Code:
0: kd> kv
Child-SP          RetAddr           : Args to Child                                                           : Call Site
fffff880`0af98c28 fffff800`036dd1a9 : 00000000`0000003d fffff880`0af994e0 00000000`00000000 00000000`00000000 : nt!KeBugCheckEx
fffff880`0af98c30 fffff800`036d9509 : 00000000`00000000 00000000`00000000 fffff880`0af994e0 fffff800`03708a90 : nt!KiBugCheckDispatch+0x69
fffff880`0af98d70 fffff800`0370875d : fffff800`038eb978 fffff800`0382ce18 fffff800`03668000 fffff880`0af99c88 : nt!KiInterruptHandler+0x29
fffff880`0af98da0 fffff800`03707535 : fffff800`0382ce10 fffff880`0af98e18 fffff880`0af99c88 fffff800`03668000 : nt!RtlpExecuteHandlerForException+0xd
fffff880`0af98dd0 fffff800`037184d1 : fffff880`0af99c88 fffff880`0af994e0 fffff880`00000000 fffffa80`07c0e4e8 : nt!RtlDispatchException+0x415
fffff880`0af994b0 fffff800`036dd282 : fffff880`0af99c88 fffffa80`07bfdb60 fffff880`0af99d30 00000000`00000000 : nt!KiDispatchException+0x135
fffff880`0af99b50 fffff800`036db0b4 : 00000000`00000000 fffff880`01be2bb8 00000000`00000000 fffff880`01be2b70 : nt!KiExceptionDispatch+0xc2
fffff880`0af99d30 fffff880`0103178f : fffffa80`07823008 00000000`00000000 fffffa80`077d5060 fffff880`039fb100 : nt!KiBreakpointTrap+0xf4 (TrapFrame @ fffff880`0af99d30)
fffff880`0af99ec0 fffffa80`07823008 : 00000000`00000000 fffffa80`077d5060 fffff880`039fb100 fffffa80`07c0e4e8 : mv91xx+0x3178f
fffff880`0af99ec8 00000000`00000000 : fffffa80`077d5060 fffff880`039fb100 fffffa80`07c0e4e8 fffffa80`07c0a2b0 : 0xfffffa80`07823008
--------------------------------------------------------------------------

Run some hard-drive diagnostics and follow these steps:Find your hard-drive manufacturer and run their tests.

Additional Tests:Post a screenshot of Crystal Disk Info summary:
Quote   Quote: Originally Posted by writhziden
If you have an SSD, make sure the following are up to date:
  • SSD firmware
  • BIOS Version
  • Chipset Drivers
  • Hard disk controller drivers/SATA drivers
  • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.
Check for any file system errors and bad sectors using Option #2 of:Use this command with Disk Check:

Code:
chkdsk C: /f /r

I don't think I'm going to be able to update stuff as I can't boot into windows normally and when i boot into safe mode i get to my login password bit and it blue screens straight away... Do you think if I bought another ssd or just bought a hdd to install windows on that may solve it? (I also got overclocking failed appear on some of my boots, I looked and it seems like when I took my PC for repair they manually oc'd in my bios, I'm afraid if I set it to auto it might not work at all haha....
My System SpecsSystem Spec
13 Jul 2013   #15
x BlueRobot

 

The diagnostic tools can be burned to a DVD or maybe even a bootable USB, and then run without even starting the Windows boot process.

I'll rather identify the problem for definite, then have you spend money unnecessarily.
My System SpecsSystem Spec
13 Jul 2013   #16
FlyingLotus

Windows 7 Home Premium 64 Bit
 
 

Quote   Quote: Originally Posted by x BlueRobot View Post
The diagnostic tools can be burned to a DVD or maybe even a bootable USB, and then run without even starting the Windows boot process.

I'll rather identify the problem for definite, then have you spend money unnecessarily.
There is no diagnostics test for my M4 Crucial SSD, I can run the additional tests on my SSD though I'm guessing?
My System SpecsSystem Spec
13 Jul 2013   #17
FlyingLotus

Windows 7 Home Premium 64 Bit
 
 

Trying to do the diagnostic checks on my HDD getting no drive found error but I'll keep trying.

Is the marvell controller problem linked to my WD HDD which is not my C drive or my Crucial M4 SSD which is my C drive?

Also is the ntoskrnl.exe a problem because that came up too in my blue screen view the other day, I think it's missing or corrupted as I wasn't able to open it at the time.
My System SpecsSystem Spec
13 Jul 2013   #18
x BlueRobot

 

ntoskrnl.exe is part of the Windows kernel, and is not the problem, it's just blamed since Windows wasn't able to find a particular driver or instruction which was actually causing the problem.

The controller will be for both hard disks, are the disks shown within the BIOS?
My System SpecsSystem Spec
13 Jul 2013   #19
FlyingLotus

Windows 7 Home Premium 64 Bit
 
 

Quote   Quote: Originally Posted by x BlueRobot View Post
ntoskrnl.exe is part of the Windows kernel, and is not the problem, it's just blamed since Windows wasn't able to find a particular driver or instruction which was actually causing the problem.

The controller will be for both hard disks, are the disks shown within the BIOS?
The m4 SSD doesn't show up in the bios boot priority bit but it shows up in the boot menu.

The HDD shows up everywhere
My System SpecsSystem Spec
14 Jul 2013   #20
x BlueRobot

 

This may give you some ideas - The BIOS does not detect or recognize the ATA / SATA hard drive

Have you checked the SSD is connected to the motherboard properly with the SATA cables?

It seems that the SSD may be the cause of the problem at the moment, does it have any return policy or warranty? I'm just checking, because if it does, then you ask for a free replacement.
My System SpecsSystem Spec
Reply

 0x0000003D BSOD - Windows 7 can't even login - Help?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD 0x000000d1 0x0000003d
I'm having trouble tracking down the source of my problems here. I keep getting freezes accompanied by a loud annoying noise from the speakers, prompting me to shutdown manually, but occasionally getting a proper BSOD result. I reformatted and reinstalled the OS first, I've been under too much...
BSOD Help and Support
Windows 7 BSOD 0x0000003D
Hi, i have been getting random bsods for a couple of months now. It might happen once a day or once every couple of days while i am on the internet or not doing anything really. I noticed it happens most frequently if i am playing a video game though. I have attached the dmp files hoping for a...
BSOD Help and Support
BSOD. The bugcheck was: 0x0000003d (0xfffff80000b9bf60
Windows 7 Professional (x64) Service Pack 1 (build 7601) 8168 Megabytes Usable Installed Memory Slot 'DIMM0' has 4096 MB Slot 'DIMM1' is Empty Slot 'DIMM2' has 4096 MB Processor: 3.40 gigahertz Intel Core i7-2600K Board: ASUSTeK Computer INC. P8Z68-V PRO GEN3 Rev 1.xx
BSOD Help and Support
BSOD playing everything, error 0x0000003d
Hi everyone I'm getting BSOD while playing every game I've tried. It's started about 6 months afer I've got my notebook (HP Pavilion dv6; Win7 Home Premium x64 OEM, 4 GB RAM, AMD Athlon II Dual-Core 2GHz, ATI Radeon HD 4500/5100 series). I've tried to solve them by another FAQs but with no result,...
BSOD Help and Support
BSOD analysis needed 0x0000003d
Hi All, i keep getting this random BSOD, your help analyzing what's wrong will be greatly appreciated! thanks! My Spec - Ultimate x64 - self built system - What is the age of system (hardware). 9 month old
BSOD Help and Support
BSOD using Adobe Premiere CS5.5, 0x0000003d
Hello, I just discovered this forum, so I hope this is the correct way to ask for help. I have installed Adobe Production Premium on my computer, and everytime I want to edit a project in Premiere CS5.5, a BSOD appears, saying: ŽInterrupt Exception Not HandledŽ error 0x00000003D ...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 19:44.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App