Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD STOP error 0x0000010d

13 Jul 2013   #1
Justus

Windows & Home premium (64bit)
 
 
BSOD STOP error 0x0000010d

I have had this system for about a year now and it just now started giving me problems(3 BSODs), the only hardware changes i have made is to the ram(put them in dual channel).BSOD seem to occur once every 3-4 days randomly(not influenced by any type of app) ran Blue screen viewer and it appears that Wdf01000.sys and ntoskrnl.exe are the accused.SF diag report is attached.


My System SpecsSystem Spec
.
13 Jul 2013   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hi Justus.

All your BSODs are caused by MotioninJoy simulate Xbox 360 controller (virtual Xinput device) driver.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 10D, {5, 0, 1202, fffffa80071146a0}

*** WARNING: Unable to verify timestamp for MijXfilt.sys
*** ERROR: Module load completed but symbols could not be loaded for MijXfilt.sys
Probably caused by : MijXfilt.sys ( MijXfilt+363a )

Followup: MachineOwner
---------
And the driver is kinda old.
Code:
fffff880`0c512000 fffff880`0c534000   MijXfilt T (no symbols)           
    Loaded symbol image file: MijXfilt.sys
    Image path: \SystemRoot\system32\DRIVERS\MijXfilt.sys
    Image name: MijXfilt.sys
    Timestamp:        Sat May 12 09:57:12 2012 (4FADE6A0)
    CheckSum:         00022009
    ImageSize:        00022000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from MotioninJoy simulate Xbox 360 controller(virtual Xinput device) | MotioninJoy

It appears that you have an older version of Intel RST installed.
Code:
fffff880`01027000 fffff880`013cb000   iaStor     (deferred)             
    Image path: \SystemRoot\system32\DRIVERS\iaStor.sys
    Image name: iaStor.sys
    Timestamp:        Wed Nov 30 09:09:19 2011 (4ED5A567)
    CheckSum:         0009778C
    ImageSize:        003A4000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Get rid of intel rapid storage. First uninstall it from Control Panel > Programs and Features. Then Uninstall the driver from device manager.
  1. Right click on "my computer" icon and click "manage" on the context menu.
  2. It will open the "computer management" window.
  3. Select "Device Manager" in the left pane, It will list all the existing devices up.
  4. Expand "IDE ATA/ATAPI controllers" by clicking on the triangle in front of it.
  5. Select one Intel device item under it, right click, uninstall.
  6. Continue the process for all Intel items under "IDE ATA/ATAPI controllers"
  7. Now restart the computer. At restart, windows will auto configure the appropriate native system driver.
Let us know the situation after applying the suggested changes. If it bluescreens even more, post it following the Blue Screen of Death (BSOD) Posting Instructions and upload your MSINFO32.nfo file.
  1. Click on the start button
  2. Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
  3. File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
  4. Give the time for processing, it will save a .nfo file on your desktop.
  5. Zip it, and upload it following the instruction.
My System SpecsSystem Spec
13 Jul 2013   #3
Justus

Windows & Home premium (64bit)
 
 

Thank you for your time, Arc, I appreciate it.
Q:
1.when going into device management i can not see any devices under "IDE ATA/ATAPI controllers" that would indicate that it is an Intel device(see attached file for more detail).However I have successfully uninstalled Intel RST via control panel\programs and features\ uninstall or change a program.

2.After following your link to the Motion Joy webpage I'm unclear on step number 3:""If your system is 64bits restart system and choose the "Disable Driver Signing Enforcement" option.""Is this setting found in the MOBO BIOS or is it a Windows setting or is it found in the actual program itself?

3. For the sake of time how would you recommend me trigger another blue screen to see if the problem is resolved? I ask this because they seem to occur on a 3-4 day basis.

4. Also was the Intel RST the causes for the Blue Screens or are you just recommending I uninstall it?
My System SpecsSystem Spec
.

14 Jul 2013   #4
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

1. Double click on the last item under IDE ATA\ATAPI Controllers. Click on the driver tab, and then on the driver details button. Post a screenshot of the resulting window.

2. Have a look ....
3. Give the system the due time to decide if the issue is over or not. Dont force it break.



4. RST is not the direct cause, but it is contributing towards the BSODs.



If you have any more question, let us know.
My System SpecsSystem Spec
15 Jul 2013   #5
Justus

Windows & Home premium (64bit)
 
 

Re:1. *see attached file "Driver Details*

Re:2.Alright I found the disable driver signature enforcement option in the F8 start menu. However when i proceed to follow the given instructions on how to properly install MJ(link found on the 4th step of the help page you linked) I get this error message on the 6th step of the installation tutorial*see attached file "MJ error"*
My System SpecsSystem Spec
15 Jul 2013   #6
Justus

Windows & Home premium (64bit)
 
 

Had another blue screen(7/15/13), this time it was when i was using Motion joy to see if the controller was enabled and I used the vibration testing option to verify the controller was receiving commands this caused the controller to become disconnected which was immediately followed by another Bluescreen.SF file is attached.
My System SpecsSystem Spec
15 Jul 2013   #7
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Yes it is caused by motion joy again.
Code:
........
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 10D, {5, 0, 1202, fffffa8006d453b0}

*** WARNING: Unable to verify timestamp for MijXfilt.sys
*** ERROR: Module load completed but symbols could not be loaded for MijXfilt.sys
Probably caused by : MijXfilt.sys ( MijXfilt+363a )

Followup: MachineOwner
---------
And it is the same old driver.
Code:
fffff880`0b985000 fffff880`0b9a7000   MijXfilt T (no symbols)           
    Loaded symbol image file: MijXfilt.sys
    Image path: \SystemRoot\system32\DRIVERS\MijXfilt.sys
    Image name: MijXfilt.sys
    Timestamp:        Sat May 12 09:57:12 2012 (4FADE6A0)
    CheckSum:         00022009
    ImageSize:        00022000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
If there is no updated driver available, dont use that device. Use a wired xbox 360 controller.
My System SpecsSystem Spec
16 Jul 2013   #8
Justus

Windows & Home premium (64bit)
 
 

Alright that sounds like the best course of action.Thanks for the help.
My System SpecsSystem Spec
Reply

 BSOD STOP error 0x0000010d




Thread Tools




Similar help and support threads
Thread Forum
BSoD Stop Error Code 0x0000010D (Iunno what the cause is...)
Hello, peoples. I seem to have attained a BSoD yesterday. The STOP Error code was "0x0000010D (0x00000005, 0x00000000, 0x00001202, 0x84E36560)". I believe that one of the problems is MotioninJoy's DS3 Tool program and it's driver, as every time I attempt to use it, it BSOD's. I also believe...
BSOD Help and Support
BSOD Playing several games | Error 0x0000010D
The thread title pretty much says it all. I just recently built this computer with a friend's help. I believe I have updated all my drivers and windows updates, including optional ones. As for what the BSOD says... The windows driver framework has detected that a violation has occurred....
BSOD Help and Support
BSOD NTOSKRNL.exe/wdf01000.sys, STOP 0x0000010D.
I've attached a picture of the BSOD that's been appearing a lot recently (mainly while I'm playing Final Fantasy XIV Online) even multipul times a day on my ASUS laptop. I've used the bluescreenview program and found out that every BSOD is caused by the same thing, but I have no idea how to fix the...
BSOD Help and Support
BSOD , error 0x0000010D please help me
please help me thanks guys
BSOD Help and Support
BSOD, Error 0x0000010d
Hi everyone, Can anyone help with diagnosing a BSOD problem that I have been having. It's been happening about 3-5 times a day now. It happens more often when I try to start and use Cubase 6 LE. As far as I can tell I've installed all the drivers necessary (nothing comes up as obviously...
BSOD Help and Support
Keeping getting Bluescreen *** stop: 0x0000010d
Ive been getting bluescreen lately for just starting stuff like Pokemmo and google hangout screen share and this is the message I get in the blue screen window *** stop: 0x0000010d (0x0000000000000005, 0x0000000000000000, 0x0000000000001202, 0xfffffa800cc84910
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:29.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App