Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Having bsods relating to ntoskrnl.exe+75c00

18 Jul 2013   #31
Northernsoul55

Microsoft Community Contributor Award Recipient

Windows 7 Professional 64bit
 
 

Reinstall or repair install maybe an option a bit down the line, but not just yet

The bloatware is best removed, but was not directly linked to BSOD.

Check your SSD Firmware, see if it is up todate.

And lets see if memtest picks up any errors.

cheers

Dave


My System SpecsSystem Spec
.
18 Jul 2013   #32
Dan82

Windows 7 64 bit
 
 

Memtest ran for 12 hours 7 passes 0 errors I noticed though the ram timings were different to bios.

Will try uninstall the bloated software will be on the pc in 20-30mins did you find a driver for the soundcard?

I have Samsung magician installed is the driver amongst that? It's the latest.(checked it says latest firmware)

Thinking of removing the forte and using onboard sound which is good on this board.

Thanks.
My System SpecsSystem Spec
18 Jul 2013   #33
Dan82

Windows 7 64 bit
 
 

Took the forte out, enabled hd audio in onboard section of bios, installed the latest realtek audio drivers on the asus website.
My System SpecsSystem Spec
.

19 Jul 2013   #34
Northernsoul55

Microsoft Community Contributor Award Recipient

Windows 7 Professional 64bit
 
 

Ok, good news on the memtest, can you elaborate on the RAM timings?

The only driver I could find was from here, but I suspect you have the latest:

http://www.auzentech.com/site/company/pressrelease_09092011_new_driver.php

As you have removed forte, can you please navigate back to the drivers folder and confirm
if the driver ha20x22k.sys is present or not?

How is the system now you have removed forte?

Cheers

Dave
My System SpecsSystem Spec
19 Jul 2013   #35
Dan82

Windows 7 64 bit
 
 

The timings were 15-15-15-31 or around that and triple channel, in bios XMP is enabled which is recommended and sets it to 10-10-10-27-2T i think it could just be memtest not displaying it correctly.

That driver is still there but i put .old on end of it so it's disabled now i think? system seems a lot better just getting blackscreen crashes with flashplayer that seems for sure it's Nvidia related though no bsods so far.(i've only been able to test for about 2-3h though after work yesterday however some bsods could occur often within 20-30mins before)

Should i use Driver Fusion and sweeper again remove Nvidia files then install latest just to test them out? (i do not understand why 314.22 would blackscreen on Flashplayer when in my previous it didn't, all i've upgraded was board/ram/cpu/cooler/ssd before i had i7 920 at 4ghz for 4 years with a gigabyte ud3r and corsair 1600mhz only saw a few bsods overclock related that i soon fixed)
My System SpecsSystem Spec
19 Jul 2013   #36
Northernsoul55

Microsoft Community Contributor Award Recipient

Windows 7 Professional 64bit
 
 

Hi,

Not sure about the timings to be honest. Perhaps just memtest reporting wrong as you say.
If they are correct in the BIOS then they are correct

If you renamed ha20x22k.sys to ha20x22k.sys .old it will be disabled...just don't delete it for now.

For Nividia drivers I would suggest the stable 306.23 driver as a test , but I know
your keen on the SLI, so you could try the latest drivers as the BSOD issues may
have been rectified by uninstalling Forte and updating the various drivers, so it may well
be worth a try, just set a system restore point before you attempt it.
Then test the system, use normally, games etc.

If you do experience another Nividia related crash then we need to test with the 306.23
stable drivers, if you crash with the 306.23 drivers then the problem lies elsewhere.

What is the current status of the GPU's BIOS's, are they up-to-date?

cheers

Dave
My System SpecsSystem Spec
19 Jul 2013   #37
Dan82

Windows 7 64 bit
 
 

I will try the latest once on pc tonight if they crash I might just reinstall with all latest drivers and onboard installed this time.

Not sure which bios vers the gpus are as I never have touched and I do not think that will do anything?

Thanks so much for help so far it's a wonderful system once everything sorted.
My System SpecsSystem Spec
19 Jul 2013   #38
Northernsoul55

Microsoft Community Contributor Award Recipient

Windows 7 Professional 64bit
 
 

Ok no worries, fingers crossed

Leave the GPU BIOS for the time being, I was just curious as to
what version was installed on each card and if they were up to date.

Good luck.
My System SpecsSystem Spec
19 Jul 2013   #39
Dan82

Windows 7 64 bit
 
 

Metro LL had 6 files failed to validate haha turned out to be 3.5gb worth too! will have to try after work tomorrow otherwise 100% on Sunday, work tired me out today and with the heatwave too.

PC does seem more stable, i downloaded 326.19 betas released only yesterday so hope they turn out good.

Will test for sure after work tomorrow, will report back.

Thanks for all this made me feel better, annoying when you spend a lot on new pc parts and some things can cause crashes.
My System SpecsSystem Spec
19 Jul 2013   #40
Dan82

Windows 7 64 bit
 
 

As i say this i get a bsod....attached it.(might be the latest nvidia driver?)
My System SpecsSystem Spec
Reply

 Having bsods relating to ntoskrnl.exe+75c00




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
IRQL_NOT_LESS_OR_EQUAL ntoskrnl.exe/ntoskrnl.exe+75c00
okay so I've been having problems with this computer since day one. and its not even a year old. I just redid my HDD casue my windows 7 just bricked out of no where couldnt get into safe mode either. so got my files and redid my pc. and now i keep getting this error. i posted the results from the...
BSOD Help and Support
BSOD PFN_LIST_CORRUPT and ntoskrnl.exe 75c00
Hi all.ive been stumped by this error.fresh install of windows 7.i did windows mem dig everything checked out fine.i included the mini dump files, and a screen shot of cpuz and gpuz.i dont have any blank cd's for memtest86 can i use an usb drive?any help please?!
General Discussion
BSOD Randomly ntoskrnl.exe+75c00
Hello SevenForums, I've been dealing with this issue for over a year now...I don't use this computer much after i tried everything i could to try to pin point the location of the issue but i couldint, now im trying to save this PC again since a game i want to play on it is going to be released...
BSOD Help and Support
0x0000000a ntoskrnl.exe+75c00
Hi there, Just finished build a PC for my dad out of my old pc bits. I have done a memtest+ overnight and uninstalled zone alarm and installed windows security essentials. Driver verifier Made the system so laggy it made it impossible to use.
BSOD Help and Support
Random BSODs ntoskrnl.exe+75c00
Hi Guys, I'm getting random blue screens on my Win7 64 system. They don't specifically occur under load (ie games). My system might stay up for a day, then blue screen. It's getting a bit annoying :) Mini-dumps etc attached. Cheers!
BSOD Help and Support
CRITICAL_OBJECT_TERMINATION @ ntoskrnl.exe+75c00
Resolved by purchasing new HD.
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:06.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App