Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD bugcheck 0x00000050 (0xfffffa8004ffddd0, 0x0000000000000000,

24 Jul 2013   #11
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

The Crash dump you uploaded is not Driver Verifier enabled.
Code:
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
Code:
1: kd> !verifier
fffff80004c48ac0: Unable to get verifier list.
A 0xC1 BSOD is caused by memory reasons. Either failing RAM, or any driver causing memory fault.

You said you have performed the Memtest ... no RAM failure is there. I believe you.

You say you enabled DV. I am not seeing any stress of an enabled DV in the data.
Moreover, you were suggested to run DV for 24 hours or the occurrence of the next crash, whichever is earlier.You should have thought why that time stipulation is there?

Coz, if DV is not making a crash, we have to check the reasons.

Now, Enable DV again.
  • When you are at the driver's list, dont select any driver provided by "microsoft" or "unknown".
  • Make it sure DV is actually running. Open a command prompt and give the command
    • verifier /query
    and hit enter. Is it providing a list of drivers?
  • Run it as suggested ...for 24 hours or the occurrence of the next crash, whichever is earlier.
Dont take very long to reply, as you need not to run DV for more than 24 hours. No need for 4-5 days.

If it is a failure again, we will supply you the list of drivers to select. But you have to try at first.


My System SpecsSystem Spec
.
24 Jul 2013   #12
Putt4Dough

Windows 7 64b
 
 

Yes Memtest 8 passes no errors. Tested for sure.


Thatís weird because I certainly activated verifier both time. I ran it again, as you say it is not running on it now, but it is running. When I ran it, at the end I got a message saying that no changes were made so it is running. I then ran verifier /query to confirm. All the print screens and query info is in the attached word document. Why would the logs say DV is not running when it clearly is?
My System SpecsSystem Spec
24 Jul 2013   #13
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by Putt4Dough View Post
Yes Memtest 8 passes no errors. Tested for sure.


When I ran it, at the end I got a message saying that no changes were made so it is running.
Verifier is active when you get this message



After the restart, verifier takes place.

No changes were made ... means verifier is not running.
My System SpecsSystem Spec
.

24 Jul 2013   #14
Putt4Dough

Windows 7 64b
 
 

Did you look at the print screens? I obviously did all the procedures right an that is the message I get. "No settings were changed". to me if I go through the wizard and I get this message at the end it tells me that the setting are identical to what they are set at the moment thus it up and and running as before. Might be wrong but it's logical. The passed two times it asked me to reboot. Not this time. Just "No settings were changed".



What does query tell you bellow?

HTML Code:
  C:\Windows\system32>verifier /query
  7/24/2013, 9:52:16 AM
  Level: 00000FBB
  RaiseIrqls: 0
  AcquireSpinLocks: 114856
  SynchronizeExecutions: 4
  AllocationsAttempted: 4697652
  AllocationsSucceeded: 4697652
  AllocationsSucceededSpecialPool: 4697652
  AllocationsWithNoTag: 39
  AllocationsFailed: 0
  AllocationsFailedDeliberately: 0
  Trims: 470210
  UnTrackedPool: 4599735
   
  Verified drivers:
   
  Name: iusb3hcs.sys, loads: 1, unloads: 0
  CurrentPagedPoolAllocations: 0
  CurrentNonPagedPoolAllocations: 0
  PeakPagedPoolAllocations: 0
  PeakNonPagedPoolAllocations: 0
  PagedPoolUsageInBytes: 0
  NonPagedPoolUsageInBytes: 0
  PeakPagedPoolUsageInBytes: 0
  PeakNonPagedPoolUsageInBytes: 0
   
  Name: amdxata.sys, loads: 1, unloads: 0
  CurrentPagedPoolAllocations: 0
  CurrentNonPagedPoolAllocations: 0
  PeakPagedPoolAllocations: 0
  PeakNonPagedPoolAllocations: 0
  PagedPoolUsageInBytes: 0
  NonPagedPoolUsageInBytes: 0
  PeakPagedPoolUsageInBytes: 0
  PeakNonPagedPoolUsageInBytes: 0
   
  Name: igdkmd64.sys, loads: 1, unloads: 0
  CurrentPagedPoolAllocations: 5
  CurrentNonPagedPoolAllocations: 652
  PeakPagedPoolAllocations: 8
  PeakNonPagedPoolAllocations: 713
  PagedPoolUsageInBytes: 274516
  NonPagedPoolUsageInBytes: 4004272
  PeakPagedPoolUsageInBytes: 309176
  PeakNonPagedPoolUsageInBytes: 4068120
   
  Name: e1k60x64.sys, loads: 1, unloads: 0
  CurrentPagedPoolAllocations: 0
  CurrentNonPagedPoolAllocations: 1040
  PeakPagedPoolAllocations: 0
  PeakNonPagedPoolAllocations: 1040
  PagedPoolUsageInBytes: 0
  NonPagedPoolUsageInBytes: 293120
  PeakPagedPoolUsageInBytes: 0
  PeakNonPagedPoolUsageInBytes: 293120
   
  Name: ndis.sys, loads: 1, unloads: 0
  CurrentPagedPoolAllocations: 6
  CurrentNonPagedPoolAllocations: 1581
  PeakPagedPoolAllocations: 8
  PeakNonPagedPoolAllocations: 1666
  PagedPoolUsageInBytes: 984
  NonPagedPoolUsageInBytes: 646184
  PeakPagedPoolUsageInBytes: 1296
  PeakNonPagedPoolUsageInBytes: 684016
   
  Name: pppop64.sys, loads: 1, unloads: 0
  CurrentPagedPoolAllocations: 0
  CurrentNonPagedPoolAllocations: 0
  PeakPagedPoolAllocations: 0
  PeakNonPagedPoolAllocations: 0
  PagedPoolUsageInBytes: 0
  NonPagedPoolUsageInBytes: 0
  PeakPagedPoolUsageInBytes: 0
  PeakNonPagedPoolUsageInBytes: 0
   
  Name: rtkvhd64.sys, loads: 1, unloads: 0
  CurrentPagedPoolAllocations: 0
  CurrentNonPagedPoolAllocations: 1038
  PeakPagedPoolAllocations: 2
  PeakNonPagedPoolAllocations: 1038
  PagedPoolUsageInBytes: 0
  NonPagedPoolUsageInBytes: 807776
  PeakPagedPoolUsageInBytes: 304304
  PeakNonPagedPoolUsageInBytes: 807776
   
  Name: atmfd.dll, loads: 1, unloads: 0
  CurrentPagedPoolAllocations: 0
  CurrentNonPagedPoolAllocations: 0
  PeakPagedPoolAllocations: 0
  PeakNonPagedPoolAllocations: 0
  PagedPoolUsageInBytes: 0
  NonPagedPoolUsageInBytes: 0
  PeakPagedPoolUsageInBytes: 0
  PeakNonPagedPoolUsageInBytes: 0
   
  Name: secdrv.sys, loads: 1, unloads: 0
  CurrentPagedPoolAllocations: 1
  CurrentNonPagedPoolAllocations: 0
  PeakPagedPoolAllocations: 3
  PeakNonPagedPoolAllocations: 0
  PagedPoolUsageInBytes: 72
  NonPagedPoolUsageInBytes: 0
  PeakPagedPoolUsageInBytes: 316
  PeakNonPagedPoolUsageInBytes: 0
   
  C:\Windows\system32>
My System SpecsSystem Spec
24 Jul 2013   #15
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Sorry mate. My intention is to help you, not to argue with you. Please dont think that I am passing any information without seeing ant single bit of possible data.

But if you start to think that I am saying anything without seeing the data, it seems that you are not having the needed faith on the helper. It will not reach any goal. For neither of us.

So in this situation I am deciding that it is better for me to revoke myself from your thread. I hope you understand my point.

Wish the early solution of your issue. Bet of luck.
My System SpecsSystem Spec
24 Jul 2013   #16
Putt4Dough

Windows 7 64b
 
 

No no don't get me wrong. I'm not arguing. I'm just trying to figure out why I'm getting this message when I know that I activated verifier. See the tests that I just did:

OK so I did a test to see if the message “No settings were changed” after verifier wizard is really because it’s not running or if it tells me that it is already running identically to the previous configuration. I started Verifier and went through the wizard but purposely unselected one driver from the previous configuration and then I got a message asking be to reboot. This logically tells me that verifier is was running and the message “No settings were changed” is to tell me just that.
My System SpecsSystem Spec
24 Jul 2013   #17
Putt4Dough

Windows 7 64b
 
 

Does the query log tell you that it's running or otherwise?
My System SpecsSystem Spec
24 Jul 2013   #18
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Is the query log after reboot?

Then the .doc file you uploaded is a critical one to create. Save it upto a point, then restart ... open it again, add the verifier query log, and complete it. Is it what you have done?

If you are running with verifier on, you will come to know yourself that something is going on there. Computer will response at a lag ... things will go slow ..... mouse and cursor will go sticky ...... and shortly it will crash.
My System SpecsSystem Spec
24 Jul 2013   #19
Putt4Dough

Windows 7 64b
 
 

No. What I did is ran the verifier and took print screens. then got the message that no changes done. Ran /query right after, no reboot, and sent you the doc. I'm not noticing any lag.

What I can do is deactivate verifier, reboot and then reactivate it, reboot and send you the query. Would that good?
My System SpecsSystem Spec
24 Jul 2013   #20
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

You follow the tutorial Driver Verifier - Enable and Disable again ... from the very beginning. Dont miss any single step. When all is done appropriately, it will ask for a reboot itself. And that asking for reboot is the confirmation that you have made your custom verifier settings.

After the reboot .... you need not need me or anybody to point out whether verifier is running or not. It will let you know its existance in a very good manner, and will crash shortly.

So go follow the steps from the beginning.
My System SpecsSystem Spec
Reply

 BSOD bugcheck 0x00000050 (0xfffffa8004ffddd0, 0x0000000000000000,




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD on Asus Laptop, The bugcheck was: 0x00000050
Hi there, first time posting. I'm having an issue with my laptop, Asus U50F. Keep getting random BSOD, thought it was a windows problem so I reinstalled windows 7 pro on a fresh SSD. Used memtest86+ to check ram and all tests ran fine. Not sure where to look for problems. I've attached my SF...
BSOD Help and Support
Bugcheck 0x00000050
I keep getting the 0x00000050 bugcheck whenever I boot up my PC. The result is that the computer has to boot up twice. It almost always fails to boot with the bugcheck given above.
BSOD Help and Support
BSOD several times bugcheck 0x00000050 in Event log every time
I bought a new computer a few weeks ago and installed the old copy of Windows 7 from my previous PC. I set it up over the last few weeks, added more disk drives and started using it a few days ago. After it crashed I opened the event viewer and I can see some bugcheck events. This is what...
BSOD Help and Support
STOP: 0x00000050 (0xfffffa800a600000, 0x0000000000000000, 0xfffff8800b
On new laptop HP ProBook 4545s and clean installed Windows 7 64bit J have 50 BSODS since for 60 days. All drivers and software is from HP support site. J think maybe ESS 6 is the cause, or some of HP driver helper software. In the thread title is only one and first stop error, in attach are rest of...
BSOD Help and Support
BSOD ntoskrnl.exe, HDAudBus.sys bugcheck code 0x00000050
Hi, I've been getting this BSOD for almost 2 weeks, its almost always the same error, the BSOD says win32k.sys caused the crash, but when looking at the dump files using BlueScreenView, it points to ntoskrnl.exe or sometimes HDAudBus.sys I have done the following: Updated all the drivers i can...
BSOD Help and Support
BSOD while scanning through music on iTunes 10.5, bugcheck 0x00000050
I am running Windows 7 Home Premium x64 SP1. The system came with RTM Windows 7 and was upgraded to SP1 after activation. The system itself is only three weeks old and still covered under the 30-day limited warranty. This is the second BSOD on this system; thread for the first is located here. ...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 02:34.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App