Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: System Freeze: Only when I come back to computer

19 Jul 2013   #11
dinglesniff

Windows 7 Ultimate
 
 

The I and E drive are showing errors like this, any ideas? They both passed the long test in seatools


Checking file system on I:
The type of the file system is NTFS.
Volume label is Games - Data Seagate.

A disk check has been scheduled.
Windows will now check the disk.

CHKDSK is verifying files (stage 1 of 5)...
312064 file records processed. File verification completed.
0 large file records processed. 0 bad file records processed. 0 EA records processed. 4 reparse records processed. CHKDSK is verifying indexes (stage 2 of 5)...
318294 index entries processed. Index verification completed.
0 unindexed files scanned. 0 unindexed files recovered. CHKDSK is verifying security descriptors (stage 3 of 5)...
312064 file SDs/SIDs processed. Cleaning up 14 unused index entries from index $SII of file 0x9.
Cleaning up 14 unused index entries from index $SDH of file 0x9.
Cleaning up 14 unused security descriptors.
Security descriptor verification completed.
3116 data files processed. CHKDSK is verifying Usn Journal...
37290768 USN bytes processed. Usn Journal verification completed.
CHKDSK is verifying file data (stage 4 of 5)...
312048 files processed. File data verification completed.
CHKDSK is verifying free space (stage 5 of 5)...
345945675 free clusters processed. Free space verification is complete.
Correcting errors in the Volume Bitmap.
Write failure with status 0xc0000185 at offset 0x15d5037de00 for 0x200 bytes.
The second NTFS boot sector is unwriteable.

Internal Info:
00 c3 04 00 44 1b 01 00 2a 12 02 00 00 00 00 00 ....D...*.......
0b 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................


My System SpecsSystem Spec
.
19 Jul 2013   #12
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Chkdsk detected some errors. Tried to recover those ... but failed, as some sectors it found unwriteable.

Back up the data and change the disc.
My System SpecsSystem Spec
19 Jul 2013   #13
dinglesniff

Windows 7 Ultimate
 
 

Ok I got my first BSOD but my computer rebooted see dump
My System SpecsSystem Spec
.

20 Jul 2013   #14
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by dinglesniff View Post
Ok I got my first BSOD but my computer rebooted see dump
This BSOD is caused by Display/graphics.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000094, fffff88006c01045, fffff8800e4a1478, fffff8800e4a0cd0}

Probably caused by : nvlddmkm.sys ( nvlddmkm+1045 )

Followup: MachineOwner
---------
Whereas the display driver is the latest one.
Code:
fffff880`06c00000 fffff880`076e5000   nvlddmkm T (no symbols)           
    Loaded symbol image file: nvlddmkm.sys
    Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp:        Fri Jun 21 14:36:16 2013 (51C41788)
    CheckSum:         00AB87FF
    ImageSize:        00AE5000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
But still if it is crashing, there must be something that is influencing display adversely.

I am seeing that you are highly overclocked.
Code:
CPUID:        "Intel(R) Core(TM) i7 CPU         930  @ 2.80GHz"
MaxSpeed:     2800
CurrentSpeed: 3990
As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings. Also set the BIOS to default, too.
How To Clear CMOS (Reset BIOS)

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy.

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
At least 30% free is good. Also let us know about the wattage of your PSU.
My System SpecsSystem Spec
20 Jul 2013   #15
dinglesniff

Windows 7 Ultimate
 
 

My system has been stable for years with the 1GHZ overclock and I have not had any issues. I have set the Titan to the default settings, but it should be able to Overclock. One titan had the same O/C and had little issues...

PSU Wise I have a Corsair AX860 and technically it should be fine.


System:

Gigabyte X58-ud5 rev 2
3 sticks of 2GB G Skill ram
2 EVGA Titans STock
I7-930 O/C to 3.99ghz
3 Dell 30"
1 DVD Burner
10 system fans
Corsaid AX860 PSU
3 1.5TB HD
3 3TB WD Red HD
1 Samsung 840 pro SSD
Quote   Quote: Originally Posted by Arc View Post
Quote   Quote: Originally Posted by dinglesniff View Post
Ok I got my first BSOD but my computer rebooted see dump
This BSOD is caused by Display/graphics.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000094, fffff88006c01045, fffff8800e4a1478, fffff8800e4a0cd0}

Probably caused by : nvlddmkm.sys ( nvlddmkm+1045 )

Followup: MachineOwner
---------
Whereas the display driver is the latest one.
Code:
fffff880`06c00000 fffff880`076e5000   nvlddmkm T (no symbols)           
    Loaded symbol image file: nvlddmkm.sys
    Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp:        Fri Jun 21 14:36:16 2013 (51C41788)
    CheckSum:         00AB87FF
    ImageSize:        00AE5000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
But still if it is crashing, there must be something that is influencing display adversely.

I am seeing that you are highly overclocked.
Code:
CPUID:        "Intel(R) Core(TM) i7 CPU         930  @ 2.80GHz"
MaxSpeed:     2800
CurrentSpeed: 3990
As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings. Also set the BIOS to default, too.
How To Clear CMOS (Reset BIOS)

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy.

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
At least 30% free is good. Also let us know about the wattage of your PSU.
My System SpecsSystem Spec
20 Jul 2013   #16
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Every system is different. One can handle overclock that does not necessarily mean that the other one also can do it. If it can, it would not have BSOD'd.

It would be better if you follow the instructions and give us the proper feedback which will pave the path to further proceeding.
My System SpecsSystem Spec
20 Jul 2013   #17
dinglesniff

Windows 7 Ultimate
 
 

Quote:
Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
At least 30% free is good. Also let us know about the wattage of your PSU.
It says that it utilizes about 750 watts and I have an 860 AX860 Corsair power supply.

I uninstalled the 320.49 drivers and am trying earlier ones.


I just lowered my O/C but I don't see how this should affect it as I had a GTX 460 / Titan before and the system has been o/c stable since day one. Why would it be affected now?
My System SpecsSystem Spec
20 Jul 2013   #18
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

If the power utilization is 750 watts, better you opt for a 1000 watts PSU. Power utilization increases in situations, and then it will be at critical state at present.

Overclocking puts a stress on hardware. Hardware depreciates normally during the passage of time and utilization; overclocking accelerates the depreciation rate. So, as the overclocked hardware are stable at day 1, it will not remain that steady after a passage of time.
My System SpecsSystem Spec
20 Jul 2013   #19
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

Your specs show a HX-750 power supply.
Your computer does not use 750W of power. A quality 750W power supply will run your computer with watts left over.

Please do as instructed and run the computer at default setting until this problem is solved. (No Over Clock).

Once the problem is solved you can alway go back to the over clock and see what happens.
My System SpecsSystem Spec
20 Jul 2013   #20
dinglesniff

Windows 7 Ultimate
 
 

I am not sure if its a power issue yet but I am looking at placing an order for another PSU.

In the meantime it may be a windows issue no? Could it possibly be corruption with the second card?

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 1033

Additional information about the problem:
BCCode: 50
BCP1: FFFFFA8010D9D000
BCP2: 0000000000000000
BCP3: FFFFF80003A7E69A
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
My System SpecsSystem Spec
Reply

 System Freeze: Only when I come back to computer




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Computer won't restart. Have to hit reset button to get computer back
All of the sudden my computer is messing up. If I just start my computer up it boots up just like it should but lets say I install something and it says it needs to restart my computer is when it messes up. The computer try's to start up and the light on the monitor turns to yellow but the...
BSOD Help and Support
Random BSOD--Several different codes back to back. New computer.
Computer seems stable and then will randomly BSOD-- Doesnt seem to be consistent with what im doing. A few of the BSOD's came after a 'error memory reference line' or something like that. Computer is new, I installed drivers with supplied disks from motherboard manufacturer (asus). At first I...
BSOD Help and Support
System Freeze
Win7 Home Premium, 32bit, Sony laptop, 3GB mem, 250GB HDD Need opinions on why computer froze and action to take: -Downloaded Google Chrome Beta 15 with adblock and clicknclean addons. -After about 3 hrs, computer suddenly seemed to freeze. Could not connect to any website using...
BSOD Help and Support
System freeze.
Hi, I've recently built my P.C. and have installed Windows 7 Ultimate. For some reason every hour or two the system freezes for around 10 seconds, I can still move the mouse but programmes e.t.c. become unresponsive. I have all of the latest drivers and believe that my BIOS is setup correctly....
BSOD Help and Support
Real lag & freeze - then back to OK?!
So, after dealing with the BSOD i get a new surprise! I try to show it with this 2 pic. The problem is, sometimes i get a cca two-minutes freeze (i would call it "HALT"). The HDD led indicates, it's processing but there is no sign of life. Or maybe - i can move the mouse, hell yeah... If i try...
BSOD Help and Support
Mouse/keyboard freeze when switching back to Win7 (KVM)
Hi, I have one machine with Win7 x64 installed and one machine with Ubuntu x32. Using a Belkin Flip USB KVM switch to change between the 2. This was working until recently - now when I switch back to Win7 the mouse and keyboard freeze and the only solution is to reboot. I can switch back to...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:12.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App