Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD (03) unpon entering Sleep

23 Jul 2013   #1
2096

WIndows 7 Home Prem 64bit
 
 
BSOD (03) unpon entering Sleep

I have a Dell XPS 13, L321X that freezes upon entering sleep mode, closing the lid causes the screen the turn off but the computer stays running for a period of time before it shuts down.

Upon restarting, windows notifies Improper Shut Down and gives me an BSOD error. I'm going to include the dump file.

For information, the system is Running Windows 7, and does contain an SSD (Samsung PM830 mSata). I only have some of the basic dell programs installed, such as the Touchpad software and Keyboard Controls, along with MSE as my anti-virus. There isn't too much on this laptop to cause a problem, mostly running chrome and office 365 software. I updated video/audio/intel drivers, and other drivers, still have the problem.

I believe the problem started after a Microsoft Update, since I usually turn off automatic updating, and the problem appeared around the time I updated.

I don't believe that I am the only one to have this problem, I've attempted to use a Microsoft Hotfix (but the hotfix wouldn't run on my system) for a similar issue that someone had, but the error that windows showed was slightly different,.

Dump File
http://s000.tinyupload.com/index.php...08463785282173

Edit**** I can not roll back windows, so do not suggest.


My System SpecsSystem Spec
.
23 Jul 2013   #2
x BlueRobot

 

My System SpecsSystem Spec
23 Jul 2013   #3
2096

WIndows 7 Home Prem 64bit
 
 

I replaced the link, figured the normal dump file would be enough.
My System SpecsSystem Spec
.

23 Jul 2013   #4
x BlueRobot

 

Could upload the folder to the actual thread itself - Screenshots and Files - Upload and Post in Seven Forums
My System SpecsSystem Spec
23 Jul 2013   #5
2096

WIndows 7 Home Prem 64bit
 
 

I uploaded the file to the forum itself, I'm not too familiar with these forums so bare with me, I'm attempting to provide the necessary information, thanks.
My System SpecsSystem Spec
23 Jul 2013   #6
x BlueRobot

 

Code:
BugCheck 9F, {3, fffffa80039ab060, fffff80001c4a3d8, fffffa8009457880}

Probably caused by : pci.sys
Code:
0: kd> !irp fffffa8009457880
Irp is active with 4 stacks 3 is current (= 0xfffffa80094579e0)
 No Mdl: No System Buffer: Thread 00000000:  Irp stack trace.  
     cmd  flg cl Device   File     Completion-Context
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

			Args: 00000000 00000000 00000000 00000000
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

			Args: 00000000 00000000 00000000 00000000
>[ 16, 2]   0 e1 fffffa8006042e10 00000000 00000000-00000000    pending
	      Unable to load image \SystemRoot\system32\DRIVERS\FLxHCIc.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for FLxHCIc.sys
*** ERROR: Module load completed but symbols could not be loaded for FLxHCIc.sys
 \Driver\FLxHCIc
			Args: 00014400 00000001 00000004 00000002
 [  0, 0]   0  0 00000000 00000000 00000000-fffffa8008e99830    

			Args: 00000000 00000000 00000000 00000000
Code:
0: kd> lmvm FLxHCIc
start             end                 module name
fffff880`03c00000 fffff880`03c3d000   FLxHCIc  T (no symbols)           
    Loaded symbol image file: FLxHCIc.sys
    Image path: \SystemRoot\system32\DRIVERS\FLxHCIc.sys
    Image name: FLxHCIc.sys
    Timestamp:        Thu Apr 12 10:49:41 2012 (4F86A535)
    CheckSum:         0003B406
    ImageSize:        0003D000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Your Fresco Logic xHCI (USB3) Device Driver seems to be causing problems, please update the driver from the Dell website for your specific model.

Code:
0: kd> lmvm iaStor
start             end                 module name
fffff880`0125a000 fffff880`015fc000   iaStor   T (no symbols)           
    Loaded symbol image file: iaStor.sys
    Image path: \SystemRoot\system32\drivers\iaStor.sys
    Image name: iaStor.sys
    Timestamp:        Wed Aug 24 05:30:39 2011 (4E547E6F)
    CheckSum:         0008BE76
    ImageSize:        003A2000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Quote   Quote: Originally Posted by Arc View Post
Get rid of intel rapid storage. First uninstall it from Control Panel > Programs and Features. Then Uninstall the driver from device manager.
  1. Right click on "my computer" icon and click "manage" on the context menu.
  2. It will open the "computer management" window.
  3. Select "Device Manager" in the left pane, It will list all the existing devices up.
  4. Expand "IDE ATA/ATAPI controllers" by clicking on the triangle in front of it.
  5. Select one Intel device item under it, right click, uninstall.
  6. Continue the process for all Intel items under "IDE ATA/ATAPI controllers"
  7. Now restart the computer. At restart, windows will auto configure the appropriate native system driver.
No AV protection?

Install and perform full scans with:
information   Information
Remember to install the free version of Malwarebytes not the free trail; untick the free trial box during installation. MSE is the most lightweight and compatible with the Windows 7 operating system

You can also view this thread for a complete free and lightweight security protection combination:
My System SpecsSystem Spec
23 Jul 2013   #7
2096

WIndows 7 Home Prem 64bit
 
 

Alright, I'll attempt to follow what you posted.

I run MSE, but I uninstalled it for troubleshooting.

Thanks, I'll post back with any updates soon.
My System SpecsSystem Spec
23 Jul 2013   #8
x BlueRobot

 

Thanks
My System SpecsSystem Spec
23 Jul 2013   #9
2096

WIndows 7 Home Prem 64bit
 
 

I uninstalled intel RST, but I did not follow the quote from 'Arc' I'm a bit reluctant to uninstall my primary drive controller, since I've never done it before. But I attempted to update USB3.0 software, with no luck. So I disabled the Fresco USB3.0 controller and that solved my problem, laptop now goes to sleep without crashing and resumes properly.

In DM, the port wasn't working properly, which is strange, I ever noticed it before, so I am unsure if the port is dead, but I have a feeling it is. This laptop has one USB 2.0 and one USB 3.0 port, the 3.0 port sits adjacent to the built-in battery which remains very hot when charging. So off my limited knowledge, I assume the heat may have killed the port, and it caused this problem. I could be wrong, just a hypothesis. I had this laptop for nearly a year, with somewhat moderate continuous use, around 2500-3000 hours.

But my problem is solved, I don't need USB 3.0, even if I did, I have a fairly spec'd desktop for that use. Thanks a lot Blue Robot.
My System SpecsSystem Spec
24 Jul 2013   #10
x BlueRobot

 

Welcome, glad to be able to help
My System SpecsSystem Spec
Reply

 BSOD (03) unpon entering Sleep




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Bsod after/while entering sleep
After putting my computer into sleep mode, it crashes about (if not more than) half of the time. I've attached the mini dump file.
BSOD Help and Support
BSOD entering sleep mode
Computer crashes when entering sleep mode. The led blinks for 2 or 3 seconds before the bluescreen. When rebooting Windows displays the crash message. This happens every time the computer attempts to go to sleep mode. Computer shuts down properly. Worked fine until yesterday. Windows 7 Pro Sp1...
BSOD Help and Support
BSOD while entering sleep mode
PC just BSOD while entering sleep mode
BSOD Help and Support
BSOD when entering sleep mode
I am running Windows 7 Home Premium x64 (SP1). For the past few weeks every time I enter sleep mode I get the BSOD: 0x7E hiber_scsiport.sys. I have attached the BSOD files. Can anyone please help me fix this issue?
BSOD Help and Support
BSOD with new laptop when entering sleep
I'm not sure if I've done this correctly, but hopefully it works. I recently purchased a new laptop and noticed I get the bluescreen every so often when shutting down or entering sleep mode. Usually 50% of the time I get a complete reboot after putting the laptop to sleep. Other times that...
BSOD Help and Support
BSOD after entering sleep, now also on normal use
Hi, i always get a BSOD after my machine (windows 7 x64) has just awoken from sleep. it happens after you log back in, as soon as you move the mouse. So, i never let my computer sleep. However, i had another BSOD just as i was working away normally, the PC hadnt slept, this has motivated me...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:31.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App