Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD: ntsokrnl.exe(+more) - happens randomly

03 Aug 2013   #21
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Not getting any adequate reason for the BSODs. All the drivers are failing here are the latest versions. The display driver (ATI driver this time, next to latest version) and the intel XHCI driver (latest version).

Suggesting you some common steps ....

Scan the system for possible virus infection with the following programs.
Are you overclocking? As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings. Also set the BIOS to default, too.
How To Clear CMOS (Reset BIOS)

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy.

Let us know the results.


My System SpecsSystem Spec
.
03 Aug 2013   #22
OhNoVix

Windows 7 Home Premium 64bit
 
 

both virus scanners found nothing. overclocking nothing. I reset cmos. memtest cleared 7.5 passes over 10 hours last week, but i'll run it again tonight. temps were at/below average yesterday but I'll keep an eye on them today.

if this is a hardware issue where do you think is the best place to start?
My System SpecsSystem Spec
07 Aug 2013   #23
OhNoVix

Windows 7 Home Premium 64bit
 
 

I updated the intel chipset drivers(two?) days ago, and after that the problems seemed to have stopped. Today I got an all too familiar BSOD and I was kind of sad.

temps for everything are fine, memtest ran 8 passes with 0 errors
My System SpecsSystem Spec
.

08 Aug 2013   #24
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

The BSOD is caused by the latest version of the display driver.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {0, b, 8, 0}

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+18d968 )

Followup: MachineOwner
---------
Earlier I suggested you to use that version, but as it is causing the issues there, I would suggest you to uninstall the installed version of display driver totally, as suggested earlier; and then install 314.22 WHQL.
My System SpecsSystem Spec
08 Aug 2013   #25
OhNoVix

Windows 7 Home Premium 64bit
 
 

oh when I put in my gpu again(switched out old for new) I guess I just auto piloted and put in the newest drivers

with that said skype was randomly using 30% of my cpu ALL the time and I didn't notice it. I updated it and now it's using less than 1%.. so that's cool.
My System SpecsSystem Spec
08 Aug 2013   #26
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

If it BSODs again with the latest version auto installed again, we will have a look.
My System SpecsSystem Spec
12 Aug 2013   #27
OhNoVix

Windows 7 Home Premium 64bit
 
 

reverted back to 314.22 WHQL drivers and went about 4 full days without a blue screen. this crash happened while playing league of legends for about 2-3 hours. temps were fine(ive been monitoring them like a hawk).

=(
My System SpecsSystem Spec
12 Aug 2013   #28
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Something very expected.
Code:
BugCheck D1, {0, 2, 1, fffff8800165aea1}

*** WARNING: Unable to verify timestamp for bflwfx64.sys
*** ERROR: Module load completed but symbols could not be loaded for bflwfx64.sys
*** WARNING: Unable to verify timestamp for e22w7x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e22w7x64.sys
Probably caused by : hardware ( bflwfx64+2c65 )

Followup: MachineOwner
---------
Bigfoot Networks Bandwidth Control Wireless NDIS Light Weight Filter driver causes issues, which is included in Killer. Search in http://www.killergaming.com/support/...ad_type=1&os=7 for any update and see if it helps. Pay due attention to this part there ......
Quote:
NOTE: If you are coming from Version 1 software (6.1.x.x), this software will require you to uninstall your current version. You may see several entries for Qualcomm Atheros software in your Programs list. You need only uninstall QUALCOMM ATHEROS PERFORMANCE SUITE. This will uninstall all other entries.
My System SpecsSystem Spec
14 Aug 2013   #29
OhNoVix

Windows 7 Home Premium 64bit
 
 

hal.dll bluescreen happened with just minecraft running.

nvlddmkm.sys happened while I was asleep. I had the computer locked(windows+L), no gpu demanding programs running at all.
My System SpecsSystem Spec
14 Aug 2013   #30
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Code:
Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F7, {2b99021e8a41, 2b992ddfa232, ffffd466d2205dcd, 0}

Probably caused by : nvlddmkm.sys ( nvlddmkm+1769d6 )

Followup: MachineOwner
---------
The display driver is crashing over any version .... so it is to be checked deeply now.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

Stress test the CPU.
Hardware - Stress Test With Prime95

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy.

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know about the wattage of the PSU.

The Bugcheck code (Stop 0xF7) itself indicates to malware. Scan the system for possible virus infection with the following programs, again.
If all failed, I'd recommend you to Consider a Clean Reinstall - Factory OEM Windows 7

Let us know the results.
Motherboard next: Z87-GD65 GAMING (MS-7845)



My System SpecsSystem Spec
Reply

 BSOD: ntsokrnl.exe(+more) - happens randomly




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
ntsokrnl.exe BSOD on new build
Greetings, all! I have a new build that is giving me some trouble. All new components -- Gigabyte GA-H97N-WIFI w/ i5 4590, 8GB Kingston Hyper-X Blue, ASUS GTX550ti, and Corsair MX100 512. Everything is running stock, no overclocking or anything of that nature. It ran fine all week until...
BSOD Help and Support
BSOD ntsokrnl.exe
Woke up this morning with my computer not booting. Windows splash screen will show up and freeze. Will boot into safe mode without networking. Confused as to what's going on. Tried using BlueScreenView and couldn't figure it out. Decided to come here because you guys have helped me before super...
BSOD Help and Support
BSOD from NTSOKRNL.EXE, exhausted all efforts... :S
Im having some issues with my machine. Ive reinstalled clean installations of windows 7 ultimate 64, 3 times. Changed video cards, CPU's and even tested the RAM and the ram slots. I get "dxgmms1.sys" blue screens after gaming for a while, somtimes 6 hours in, somtimes right when the game...
Drivers
ntsokrnl.exe BSOD when running Prime95
Hello All. I have a newly built PC, which I overclocked. I've been running stress tests for a week and every once in a while, while running Prime95, I get this BSOD. It passed small ffts and blend for over 12 hours each multiple times, as well as memtest+ (5 passes, no errors), so I didnt...
BSOD Help and Support
BSOD 0x109 ntsokrnl Win 7 x64 at random times
For the past few months I have been getting this exact bug check code. I reinstalled Windows 7 last month hoping it would remedy the problem, but it hasn't. It happens at random times, sometimes when gaming, and sometimes I will be laying in bed going to sleep and I will hear the BIOS post...
BSOD Help and Support
BSOD - NTSOKRNL.exe
HI I was having these error yesterday, so i made a fresh install of win 7. This error still persists. Am attaching the needed files. QuadCore AMD Athlon II X4 630, - brand new MSI 890GXM-G65 (MS-7642) - 4 months old Corsair XMS3 CM3X2G1333C9 - brand new - 2x 2 GB Microsoft Windows 7 Ultimate...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:15.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App