My ongoing Windows 7 freeze part 3

Sorry to be a pain again it seemed to crash again but i did do a sfc scan.
Will post my logs in a bit.

The crash dump in the folder was a while back due to motion joy.

This is where my computer spontaneously just froze.

Event[14131]:
Log Name: System
Source: EventLog
Date: 2013-08-15T11:52:42.000
Event ID: 6008
Task: N/A
Level: Error
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Its_a_Computah
Description:
The previous system shutdown at 11:49:00 on ?15/?08/?2013 was unexpected.

Code:

BugCheck 10D, {5, 0, 1202, fffffa800d802430}

*** WARNING: Unable to verify timestamp for MijXfilt.sys
*** ERROR: Module load completed but symbols could not be loaded for MijXfilt.sys
Probably caused by : MijXfilt.sys ( MijXfilt+363a )

Code:

3: kd> lmvm MijXfilt
start             end                 module name
fffff880`081aa000 fffff880`081cc000   MijXfilt T (no symbols)           
    Loaded symbol image file: MijXfilt.sys
    Image path: \SystemRoot\system32\DRIVERS\MijXfilt.sys
    Image name: MijXfilt.sys
    Timestamp:        Sat May 12 05:27:12 2012 (4FADE6A0)
    CheckSum:         00022009
    ImageSize:        00022000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

The Motion Joy Wireless Xbox 360 Controller driver seems to be causing problems, it usually causes problems, please update the driver from here - MotioninJoy simulate Xbox 360 controller(virtual Xinput device) | MotioninJoy

Ok i updated i didn't realize i had the base version i have it to 7.1001 now, thanks :)

Thanks, have you had any other problems today?

Only a few days ago it froze, had a few network card issues but its only minor, apart from that no problems at all. Hopefully that was the last of that freezing.

That's good to know, leave the thread open for a few days :)

Yeah ill upload the zip file with the reports if it does happen. Sorry to trouble you with the minor stuff.

It's no trouble at all :)

Have you ran any hard drive diagnostics on that disk? Connect a another hard drive to the SATA port the hard drive was using, and see of it crashes, and I'll check the dumps in a minute.<br>