Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD BCCode 124

28 Jul 2013   #1
Bain

Windows 7 Home Premium 64 bit
 
 
Random BSOD BCCode 124

Hey folks, back again sadly. I recently upgraded several components of my system and have had a couple of issues but just woke up to see my PC BSOD. I have attached the memory dump and everything else asked for.

Thanks in advance for the help.


My System SpecsSystem Spec
.
28 Jul 2013   #2
Bain

Windows 7 Home Premium 64 bit
 
 

I haven't been able to figure anything out about this BSOD on my own. All of my temperatures were within allotted ranges, etc.
My System SpecsSystem Spec
30 Jul 2013   #3
Bain

Windows 7 Home Premium 64 bit
 
 

Still looking for any assistance anyone can offer about this. I'd like to get to the bottom of it.
My System SpecsSystem Spec
.

01 Aug 2013   #4
Bain

Windows 7 Home Premium 64 bit
 
 

Still looking for any information anyone can provide. I have had a couple of crashes that didn't produce anything while gaming and even just idle.
My System SpecsSystem Spec
02 Aug 2013   #5
x BlueRobot

 

Sorry no one has been able to reply to your thread, please do not thread bump, since it gives the false impression that someone is helping you, as the post count is increasing, creating a illusion that your having a conversation with a another member. It is also against forum rules:

Quote:
2) No useless posts, e.g., thread bumping, useless one liners, junk posting to increase post count, and identical multi-postings in different forums.
Code:
BugCheck 124, {0, fffffa800781e028, fe000000, 800400}

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : GenuineIntel
Code:
Usual causes:  Hardware, Incompatibility, May be driver corruption
Code:
2: kd> !errrec fffffa800781e028
===============================================================================
Common Platform Error Record @ fffffa800781e028
-------------------------------------------------------------------------------
Record Id     : 01ce880ff3c44403
Severity      : Fatal (1)
Length        : 928
Creator       : Microsoft
Notify Type   : Machine Check Exception
Timestamp     : 7/28/2013 6:43:55 (UTC)
Flags         : 0x00000000

===============================================================================
Section 0     : Processor Generic
-------------------------------------------------------------------------------
Descriptor    @ fffffa800781e0a8
Section       @ fffffa800781e180
Offset        : 344
Length        : 192
Flags         : 0x00000001 Primary
Severity      : Fatal

Proc. Type    : x86/x64
Instr. Set    : x64
Error Type    : Micro-Architectural Error
Flags         : 0x00
CPU Version   : 0x00000000000306a9
Processor ID  : 0x0000000000000004

===============================================================================
Section 1     : x86/x64 Processor Specific
-------------------------------------------------------------------------------
Descriptor    @ fffffa800781e0f0
Section       @ fffffa800781e240
Offset        : 536
Length        : 128
Flags         : 0x00000000
Severity      : Fatal

Local APIC Id : 0x0000000000000004
CPU Id        : a9 06 03 00 00 08 10 04 - bf e3 9a 7f ff fb eb bf
                00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
                00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

Proc. Info 0  @ fffffa800781e240

===============================================================================
Section 2     : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor    @ fffffa800781e138
Section       @ fffffa800781e2c0
Offset        : 664
Length        : 264
Flags         : 0x00000000
Severity      : Fatal

Error         : Internal timer (Proc 2 Bank 3)
  Status      : 0xfe00000000800400
  Address     : 0x00003880073f9783
  Misc.       : 0x000000000003ffff
There seems to be a problem with one of the scheduling mechanisms, since the nVidia graphics card driver seem to be within the call stack, the first point of call would be to test the graphics card for any errors.

Code:
2: kd> lmvm nvlddmkm
start             end                 module name
fffff880`0726b000 fffff880`07d50000   nvlddmkm T (no symbols)           
    Loaded symbol image file: nvlddmkm.sys
    Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp:        Fri Jun 21 10:06:16 2013 (51C41788)
    CheckSum:         00AB87FF
    ImageSize:        00AE5000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please update to the latest WHQL version from here - NVIDIA Driver Downloads - Advanced Search

Quote:
Version: 320.49
Release Date for Desktops and Notebooks : July 1st 2013
In Device Manager: 9.18.13.2049
Update BIOS (if possible):

Code:
2: kd> !sysinfo machineid
Machine ID Information [From Smbios 2.7, DMIVersion 39, Size=3493]
BiosMajorRelease = 4
BiosMinorRelease = 6
BiosVendor = American Megatrends Inc.
BiosVersion = 0402
BiosReleaseDate = 03/07/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
SystemFamily = To be filled by O.E.M.
SystemVersion = System Version
SystemSKU = SKU
BaseBoardManufacturer = ASUSTeK COMPUTER INC.
BaseBoardProduct = P8B75-M LE
BaseBoardVersion = Rev X.0x
Please check for any potential BIOS updates, which usually resolves many hardware problems. Ensure you flash the BIOS with the version specific to your motherboard model and revision number, since you could potentially irreversibility corrupt the BIOS.

Run Furmark for a few hours, do not let the temperature exceed 80*C, please stop the test immediately if this temperature is reached:
My System SpecsSystem Spec
02 Aug 2013   #6
Bain

Windows 7 Home Premium 64 bit
 
 

Sorry for bumping - my mistake. I have updated the WHQL driver and went from 0402 to 0407 on the BIOS, but I am wary of making a mistake I will regret. I read the updates and one(0407) that claimed to add support for my CPU of all things. I see some stability improvements that I'd like to pick up, but do I have to flash to every version in the order they were released, or can I skip over the ones that don't seem to help me? I've only flashed once before this and It's been a long time so sorry for my incompetence.

The GPU does climb to 80C in Furmark, but I have never seen the temperature go above 55C while gaming. I've had heating issues before so I watch those pretty closely. Thanks for your help, sir!

Edit: Ran Furmark more while manually adjusting the fan speeds. As I suspected the fan wasn't turning itself up fast enough to compensate. It ran at 75C with me manually adjusting the fan speed. Will see if it maintains.
My System SpecsSystem Spec
02 Aug 2013   #7
x BlueRobot

 

You should be able to skip to the latest BIOS version. Although check the instructions from the vendor. Here's how to flash the BIOS - How to Update Your Computer's BIOS: 8 Steps (with Pictures)

Here's a few threads to put you at ease about it:Please post back when Furmark has complete.
My System SpecsSystem Spec
06 Aug 2013   #8
Bain

Windows 7 Home Premium 64 bit
 
 

I have updated to the latest bios version(also did a clean driver installation). The card passed the Furmark test without passing 75C(which still seems hot to me, but I'm not sure what to expect in that realm). However, I have had another instance of a similar recurring problem where my sound will pause, mouse will freeze, etc and nothing will happen like my computer is about to lock up(never happens, but it renders it useless until reboot). Temperatures are always OK, cpu/memory usage is fine, etc

Is it safe to say my problem is related to my mobo?
My System SpecsSystem Spec
07 Aug 2013   #9
x BlueRobot

 

Have you had any more BSODs?

Please boot into the BIOS, and then post the voltages for the 3.3V, 5V and 12V rails.

Have you tried placing the graphics card in a different PCI/PCIe slot?
My System SpecsSystem Spec
Reply

 Random BSOD BCCode 124




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD BCCode F4
This has been a problem for the last few days. I cleaned out my PC with some compressed air, closed everything back up and since then I have had these BSOD. Normally the thing will just do a hard crash and not even display the BSOD screen. This last time I got lucky and decided this was beyond...
BSOD Help and Support
Random BSOD's BCCode: 1e
Hello, I'm getting the past few weeks random BSOD's. The BSOD error screen is in dutch. ------------------------------------------------------------------------------------------------------- Probleemhandtekening: Gebeurtenisnaam van probleem: BlueScreen Versie van...
BSOD Help and Support
BSOD random, BCCode f4
I have a Lenovo ThinkCentre M90Z running Windows 7 Pro SP1 (64 bit) at the office. It's about a year old and has a custom image for my company. This is something that keeps happening randomly. I won't even be doing anything on my computer and it will crash, BSOD, and reboot asking me if I want...
BSOD Help and Support
BSOD often and random, BCCode: fe
BSOD While working on MS excell/word and browsing online. Report error 0x0000007F (0x00000000000000008, 0x0000000080030033, 0x00000000000406F8, 0xFFFFF800002F08B50) Specifications: Windows 7 professional 64 bit 8Gb RAM 128GB SSL Intel core 1.5 6months old (November 2011)
BSOD Help and Support
Random BSOD - BCCode: f4
Please someone help me. I have experienced the BSOD three times in the last few weeks and it happened again there now. The details of the last dump are below: Problem Signature: Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.768.3 Locale ID: 2057 Additional Information about the...
BSOD Help and Support
Random BSOD: BCCODE 50
Hello all, I am getting BSODs and I do not know what else to do. I tried everything that came up to my mind. Brief history of the issue: Had Windows Vista installed and decided that would be good to update to Windows 7. I replaced my old hard drive (fully functional) with a SSD (just for the OS)...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:40.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App