Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD volsnap,sys, errors in sfc -scannow (cbs.log)

29 Jul 2013   #1
cinder

Windows 7 Ultimate x64
 
 
BSOD volsnap,sys, errors in sfc -scannow (cbs.log)

Hi there,
Received a BSOD earlier relating to volsnap.sys. Did not get the chance to grab the error code. Have now changed settings so that system doesn't automatically restart.

Read a few existing threads and followed advice with running the scan. Have amended cbs.log to only show relevant errors as advised.

(see attached).

The problems seems to relate to IE 10. Any recommendations please?

Just realised there's a BSOD section, should have posted it there - unsure how to move.


My System SpecsSystem Spec
.
30 Jul 2013   #2
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Requested a friend to take a look at the CBS.

In the meantime, please Please 'Grab all' and post your files following -
Blue Screen of Death Posting Instructions
My System SpecsSystem Spec
30 Jul 2013   #3
cinder

Windows 7 Ultimate x64
 
 

Thanks, & done.
My System SpecsSystem Spec
.

30 Jul 2013   #4
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Is the firmware of your SSD up to date?

Upload a screenshot using:
CrystalDiskInfo
For how to upload a screenshot or file, read here

Test your Hard Drive by running:
Hard Drive Diagnostic Procedure
Run Disk Check:
Run Disk Check in Windows 7 for Bad Sectors & Errors
Reduce items at start up:
Performing a Clean Startup in Windows 7

Add, or Remove Startup Programs in Windows 7
Antivirus software is basically whats just needed there.

Follow this -
Quote   Quote: Originally Posted by writhziden View Post
If you have an SSD, make sure the following are up to date:
  • SSD firmware
  • BIOS Version
  • Chipset Drivers
  • Hard disk controller drivers/SATA drivers
  • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.
Drivers - You need to either update them to the latest version available, or uninstall/temporarily disable and see if BSOD's continue.

LHidFilt.Sys Fri Sep 21 17:05:39 2007
Logitech SetPoint HID Filter Driver
Driver Reference Table - LHidFilt.Sys

LMouFilt.Sys Fri Sep 21 17:05:43 2007
Logitech SetPoint HID Filter Driver
Driver Reference Table - LMouFilt.Sys

wdcsam64.sys Wed Apr 16 14:39:08 2008
Western Digital SCSI Arcitecture Model (SAM) WDM driver [br] 2008 driver version has known BSOD issues in Windows
Driver Reference Table - wdcsam64.sys

000.fcl Fri Sep 26 19:11:22 2008
CyberLink FCL Driver
Driver Reference Table - 000.fcl

BSOD BUGCHECK SUMMARY:
Code:
Debug session time: Tue Jul 30 06:26:00.146 2013 (UTC + 6:00)
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:11:55.974
*** ERROR: Module load completed but symbols could not be loaded for volsnap.sys
Probably caused by : volsnap.sys ( volsnap+19eae )
BugCheck 1000007E, {ffffffffc0000005, fffff88001e19eae, fffff880132247c8, fffff88013224020}
BugCheck Info: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
Bugcheck code 1000007E
PROCESS_NAME:  System
BUGCHECK_STR:  0x7E
DEFAULT_BUCKET_ID:  NULL_DEREFERENCE
FAILURE_BUCKET_ID:  X64_0x7E_volsnap+19eae
MaxSpeed:     3400
CurrentSpeed: 3411
BiosVersion = 0402
BiosReleaseDate = 11/16/2011
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
My System SpecsSystem Spec
30 Jul 2013   #5
cinder

Windows 7 Ultimate x64
 
 

Looks like there is an update to my SSD (see screen shot).

Release Date: 04/02/2013
Firmware 070H is recommended for anyone currently running 040H or previous firmware releases. It includes incremental improvements and refinements over these versions which may improve the overall user experience.

So, update you think?
My System SpecsSystem Spec
30 Jul 2013   #6
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

I would update it, or rather I should say I did update mine. I have 3 Crucial's and updated all 3 and have had no problems at all. The update is quick and simple and is not destructive at all, although I would back up, just in case. If you try the update and the disk can't recognize your SSD, put you sata controller in IDE mode and it will find it with no problem. Then put it back in AHCI mode after the update.
My System SpecsSystem Spec
30 Jul 2013   #7
cinder

Windows 7 Ultimate x64
 
 

Ok thanks. I've updated it successfully so I'll keep an eye on the PC over the next few days to see if that's helped.

I'll also look into updating the drivers mentioned:

LHidFilt.Sys Fri Sep 21 17:05:39 2007
Logitech SetPoint HID Filter Driver
Driver Reference Table - LHidFilt.Sys

LMouFilt.Sys Fri Sep 21 17:05:43 2007
Logitech SetPoint HID Filter Driver
Driver Reference Table - LMouFilt.Sys

wdcsam64.sys Wed Apr 16 14:39:08 2008
Western Digital SCSI Arcitecture Model (SAM) WDM driver [br] 2008 driver version has known BSOD issues in Windows
Driver Reference Table - wdcsam64.sys

000.fcl Fri Sep 26 19:11:22 2008
CyberLink FCL Driver
Driver Reference Table - 000.fcl

If I can work out where/how.
My System SpecsSystem Spec
30 Jul 2013   #8
cinder

Windows 7 Ultimate x64
 
 

I have updated LMouFilt.Sys Fri Sep 21 17:05:43 2007 to the 2013 version but I can't seem to get LHidFilt.Sys which is still showing 2007, I thought they'd both be done as part of the Logitech Set Point Update. I did however have to cancel the upgrade of the USB bluetooth dongle firmware as it stopped progressing, perhaps that's why.

Also, on the WD support page there's only the option to upgrade the firmware of the external WD drive, and this doesn't affect any of the Windows drivers so therefore wdcsam64.sys doesn't get updated.
My System SpecsSystem Spec
31 Jul 2013   #9
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

The SFC scan shows the following problems...
Code:
2013-07-30 10:47:33, Info                  CSI    00000321 [SR] Repairing 3 components
2013-07-30 10:47:33, Info                  CSI    00000322 [SR] Beginning Verify and Repair transaction
2013-07-30 10:47:33, Info                  CSI    00000323 [SR] Cannot repair member file [l:54{27}]"Windows Feed Discovered.wav" of Microsoft-Windows-IE-InternetExplorer, Version = 10.2.9200.16521, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
2013-07-30 10:47:33, Info                  CSI    00000324 [SR] Cannot repair member file [l:56{28}]"Windows Navigation Start.wav" of Microsoft-Windows-IE-InternetExplorer, Version = 10.2.9200.16521, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
2013-07-30 10:47:33, Info                  CSI    00000325 [SR] Cannot repair member file [l:52{26}]"Windows Pop-up Blocked.wav" of Microsoft-Windows-IE-InternetExplorer, Version = 10.2.9200.16521, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
2013-07-30 10:47:33, Info                  CSI    00000326 [SR] Cannot repair member file [l:54{27}]"Windows Information Bar.wav" of Microsoft-Windows-IE-InternetExplorer, Version = 10.2.9200.16521, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
... as well as two other files which it managed to fix.
I'll post a fix protocol for these a bit later.
My System SpecsSystem Spec
31 Jul 2013   #10
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I've uploaded a file - cdraa.zip - to my SkyDrive at Noel's SkyDrive
Please download and save it.
Right-click on the saved file and select Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print these instructions!)
Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.
Pick the option to use a Command Prompt
At the prompt type
DIR C:\cdraa
hit the enter key - if you get a 'Not Found' error try
DIR D:\cdraa
or
DIR E:\cdraa

The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...

XCOPY <drive>:\cdraa <drive>:\windows\winsxs /y /i /s /v /h

(e.g.XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )

run the command (it should take almost no time)and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.
Now run SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new CBS.log file to your reply
Also run a new MGADiag report, and post the result.
My System SpecsSystem Spec
Reply

 BSOD volsnap,sys, errors in sfc -scannow (cbs.log)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
SFC /Scannow Cannot Repair Errors
Being new to this forum, excuse any incorrect requests... Anyway, I have a Lenovo PC that started having very long boot up time (greater than 12 minutes). Have checked everything possible, no Malware found, viruses, Trojans and so on. Tried all that I know to try and fix problem with no luck...
Performance & Maintenance
BSOD every boot 0x1e, safe mode boots ~1/2 the time, scannow errors
Hi folks, I'm getting BSOD 0x1e every time I try to boot, can boot into safe mode with or without networking about half the time, get BSOD at the end of the screen that shows which .sys files are being loaded when safe mode bsods. I'm currently bed bound following back surgery and not being able...
BSOD Help and Support
SFC/Scannow errors
I'm having trouble installing Windows 7 Service Pack 1 KB976932, after downloading the update on reboot it says updated failed and reverts changes. I ran a SFC/Scannow command and the following two errors came up as un-fixable. 2013-10-04 23:16:21, Info CSI 0000003d ...
Performance & Maintenance
SFC /SCANNOW Errors + Unable To Fix
Recently I been getting BSODs here and there. Some of the errors were dxgmms1.sys and the latest one was memory management. I ran sfc /scannow from cmd (I did right click and select run as admin) and it found some errors and said it was unable to fix them. I ran sfc 3-4 times and it still couldn't...
Performance & Maintenance
Did sfc /scannow have errors.
So I did the sfc /scannow on my wifes puter. Got to 2% and had errors the scan stopped and that the errors could not be fixed. I looked at the log and am not sure what this means. I am using Windows 7 home premium. Thanks for any help.
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 19:18.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App