Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD randomly before and after windows loads

30 Jul 2013   #1
purplefreak3

Windows 7 Home Premium 64bit
 
 
BSOD randomly before and after windows loads

Started about a month ago, I started randomly getting BSODs and I don't know what triggers them as sometimes I can be working and other times it does it even with being idle. Recently it even started doing even before booting into windows. I have attached the files for the SF Diagnostic Tool.


My System SpecsSystem Spec
.
30 Jul 2013   #2
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Norton is a frequent cause of BSOD's.
Replace with Microsoft Security Essentials & the Free version of Malwarebytes, update and make full scans separately:
Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase

Microsoft Security Essentials - Microsoft Windows

Malwarebytes Free
  • Do not start the trial version of MalwareBytes
You may also take a look at:
Good & Free System Security Combination
Reduce items at start up:
Performing a Clean Startup in Windows 7

Add, or Remove Startup Programs in Windows 7
Antivirus software is basically whats just needed there.

Make scans with -
TDSSKiller Rootkit Removal Utility Free Download | Kaspersky Lab US

Online Virus Scanner Eset
Use the System File Checker tool and Run Disk Check:
Repair Windows 7 System Files with System File Checker

Run Disk Check in Windows 7 for Bad Sectors & Errors
Upload a screenshot using:
CrystalDiskInfo
For how to upload a screenshot or file, read here

Test your Hard Drive by running:
Hard Drive Diagnostic Procedure
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor:
Piriform - Speccy

CPUID - HWMonitor
  • For how to upload a screenshot or file, read here

Test and Diagnose RAM Issues with Memtest86+:
RAM - Test with Memtest86+
Pay close attention to part 3 of the tutorial "If you have errors"
Tip   Tip
  • Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


Your BIOS dates from 2009. Please check at the manufacturer's website to see if there are any BIOS updates available for your system. Also check the readme file to see if they apply to the problems that you are having. Please be advised that flashing the BIOS is a very unforgiving process - and one mistake can physically damage your motherboard.

BiosVersion = F4
BiosReleaseDate = 02/24/2009
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = EP45-UD3L

BSOD BUGCHECK SUMMARY:
Code:
Debug session time: Mon Jul 22 04:56:37.796 2013 (UTC + 6:00)
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:00:41.372
Probably caused by : cng.sys ( cng!HashFirstUserModeCallerBlobs+a5 )
BugCheck A, {1003c0, 2, 0, fffff80003704095}
BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a)
Bugcheck code 0000000A
BUGCHECK_STR:  0xA
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  csrss.exe
FAILURE_BUCKET_ID:  X64_0xA_cng!HashFirstUserModeCallerBlobs+a5
MaxSpeed:     2830
CurrentSpeed: 2833
BiosVersion = F4
BiosReleaseDate = 02/24/2009
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = EP45-UD3L
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Debug session time: Mon Jul 22 04:47:48.678 2013 (UTC + 6:00)
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:00:26.629
Probably caused by : dxgkrnl.sys ( dxgkrnl!DpiFdoStartAdapter+2f4 )
BugCheck 1A, {1236, fffffa800522e530, fffffa800522e5b8, 136e18}
BugCheck Info: MEMORY_MANAGEMENT (1a)
Bugcheck code 0000001A
BUGCHECK_STR:  0x1a_1236
PROCESS_NAME:  csrss.exe
FAILURE_BUCKET_ID:  X64_0x1a_1236_dxgkrnl!DpiFdoStartAdapter+2f4
MaxSpeed:     2830
CurrentSpeed: 2833
BiosVersion = F4
BiosReleaseDate = 02/24/2009
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = EP45-UD3L
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Debug session time: Sat Jul 13 09:26:55.619 2013 (UTC + 6:00)
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 2:11:54.570
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+19e63 )
BugCheck E3, {fffffa800d3f4360, fffffa800520e660, 0, 2}
BugCheck Info: RESOURCE_NOT_OWNED (e3)
Bugcheck code 000000e3
BUGCHECK_STR:  0xE3
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0xE3_nt!_??_::FNODOBFM::_string_+19e63
MaxSpeed:     2830
CurrentSpeed: 2833
BiosVersion = F4
BiosReleaseDate = 02/24/2009
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = EP45-UD3L
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Debug session time: Wed Jul 10 19:35:04.957 2013 (UTC + 6:00)
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:00:28.534
Probably caused by : dxgkrnl.sys ( dxgkrnl!DpiFdoStartAdapter+2f4 )
BugCheck 1A, {1236, fffffa800522e530, fffffa800522e5b8, 136e18}
BugCheck Info: MEMORY_MANAGEMENT (1a)
Bugcheck code 0000001A
BUGCHECK_STR:  0x1a_1236
PROCESS_NAME:  csrss.exe
FAILURE_BUCKET_ID:  X64_0x1a_1236_dxgkrnl!DpiFdoStartAdapter+2f4
MaxSpeed:     2830
CurrentSpeed: 2833
BiosVersion = F4
BiosReleaseDate = 02/24/2009
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = EP45-UD3L
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Debug session time: Mon Jul  8 03:54:28.304 2013 (UTC + 6:00)
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 6:47:20.880
Probably caused by : ntkrnlmp.exe ( nt!ExFreePoolWithTag+43 )
BugCheck 3B, {c0000005, fffff800035c3123, fffff8800a4aacf0, 0}
BugCheck Info: SYSTEM_SERVICE_EXCEPTION (3b)
Bugcheck code 0000003B
BUGCHECK_STR:  0x3B
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  svchost.exe
FAILURE_BUCKET_ID:  X64_0x3B_nt!ExFreePoolWithTag+43
MaxSpeed:     2830
CurrentSpeed: 2833
BiosVersion = F4
BiosReleaseDate = 02/24/2009
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = EP45-UD3L
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Debug session time: Sat Jul  6 03:22:01.037 2013 (UTC + 6:00)
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:48:41.988
Probably caused by : memory_corruption ( nt!MmCreateSection+395 )
BugCheck 1E, {ffffffffc0000005, fffff8000377bbd5, 0, 400010}
BugCheck Info: KMODE_EXCEPTION_NOT_HANDLED (1e)
Bugcheck code 0000001E
BUGCHECK_STR:  0x1E_c0000005_R
PROCESS_NAME:  firefox.exe
FAILURE_BUCKET_ID:  X64_0x1E_c0000005_R_nt!MmCreateSection+395
MaxSpeed:     2830
CurrentSpeed: 2833
BiosVersion = F4
BiosReleaseDate = 02/24/2009
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = EP45-UD3L
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
My System SpecsSystem Spec
Reply

 BSOD randomly before and after windows loads




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD w/ cursor when SSD/HDD plugedin; Windows loads fine with just SSD
I have been searching the last couple days for the solution to my problem: System will take ~10 minutes to load windows after post. Results in Black screen with cursor. This is with the SSD and HDD plugged in. I have Windows on the ssd and all my user info and programs on the HDD. I set my...
Hardware & Devices
BSOD right after windows loads
Hello guys, I got another computer getting BSOD, Windows loads, when it gets into the desktop, the screen gets a load of horizontal lines filled with mixed colors of pixels and then I get a BSOD, ks.sys BSOD. I got into safe mode with network and got the zip file using SF Diagnostic Tool, I...
BSOD Help and Support
BSOD 0x00000050 as Windows Desktop Loads
Thank you for taking the time to read this thread. Several weeks ago I began experiencing a BSOD each time my desktop would try to load in normal mode. I think the cause may stem from when I accidentally installed a 32-bit program on my 64-bit copy of Window's 7. Once I realized that I had...
BSOD Help and Support
BSOD Memory Dump minutes after Windows loads
Hello. I've had an issue in the last six months or so in which I get a blue screen memory dump or occasionally a freeze (for a minute or sometimes it will just stop responding and I have to reboot) within a few minutes of Windows starting up. This typically happens only in the morning when I...
BSOD Help and Support
BSOD BAD_POOL_CALLER happens randomly or at start when windows loads
Hi First forgive me if this sounds long winded but i want to cover most of what I did so far. I have been working on the problem for 2 days now and have gotten to various stages of working and not working. The issue at its worst will always BSOD when starting windows even using the various options....
BSOD Help and Support
BSOD soon after Windows 7 loads up
Hi. This is my first post and I'm a bit of a PC novice... My PC, an HP DM4 64bit purchased directly from HP, approx 6 months old, has just started giving me problems When I power up, Windows starts to load, I get to the Windows password screen, enter my password, and Windows continues (very...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 05:10.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App